Search the Community
Showing results for tags 'hop ups'.
Found 9 results
Shifted this thread over here as I posted in General Discussions as my first post before I knew about how things worked. Also, work on the car escalated and I wanted to keep a note of ongoing upgrades/changes. Hopefully of interest to DT03 runners/buyer. I have an original Thunder Dragon from 1988 which has had a bit of a restomod, but getting that sorted recently led to the purchase of a cheap Racing Fighter from Germany as I've never had a 2WD buggy before. First buggy full build in about 30 years, although the Thunder Dragon has been torn down and rebuilt several times. Really enjoyed it. I had an old Grasshopper2 shell in my bit box from back in the day, and I'd never painted a shell before. I don't like the modern look of buggies, being a child of the 80's I love the older buggies so I decided to have a go and some light body mods to fit it to my DT03. It was already slightly modified around the front shocks to fit on my Thunder Dragon. Here's a couple of trial fits with the primer on, trying to figure out the mountings and proportion. Couldn't resist getting the wheels on to see what it might look like: Figured out the body mods, enlarging the front hole to use the central front mount on the chassis, and adding holes in the haunches for the large l-shaped body mount towers that came with the kit. I ended up going narrower than I could have got away with on the front cuts. I chopped the DT-03 suspension mount in the centre to get the front of the shell on and off. Not bothered about the nth degree of wheel control and can always get the fancy TRF carbon one if I feel the need in future. After a couple of aborted attempts at orange from Tamiya and Halfords, and neither before strong enough for my liking and went for it with neon orange. Stickers are from MCI Racing, with red replaced with black, and yellow replaced with dark grey. Pretty pleased with how it came out. Another modern look I'm not keen on is the super short front overhang. I like the big 80s bull bars, so inspired by AMPRO Engineering on Youtube I knocked up a bull bar bumper in 3D CAD and got it 3D printed from Shapeways. Only cost a tenner! Sets the stance off nicely, I think. I do love the kit black star dish wheels though. As for the car, I loved building it and it seems solid. I've never had brushless before either, so I went for a 13.5R Speed Passion MMM motor from Modelsport who also did my some leads with tamiya plugs, and a steel 17t pinion and a bearing set to start with. The kit came with the CVA dampers with the fixed solid plates on top of the shafts. Initially I was a bit disappointed. I'm certainly no expert and have no plans to race, but it was very understeery and bottomed out a lot. Due to older equipment I have already, I still use ACOMS 27MHz radio and NiMH batteries to keep costs down which I've since learnt are on the heavy side, but they work fine in my Thunder Dragon! So, after going down the rabbit hole of what mods to do where, trying not to spend a fortune on hop ups and learning as I go, this I think is my basics for getting the DT-03 to somewhere near it's potential and also hopefully help some newbies looking at getting their DT-03 running nice in my opinion: 1) Junk the stock tyres. The deep rib fronts that come with the Racing Fighter in particular are useless on hard surfaces and I generally muck about in the street or at the yard at work. With the fiesty motor I started tearing through the rears too, and have ended up with Schumacher Mini Pin Yellows on the stock rims. Works great, and the yellows last longer than the blue counter-intuitively, because the blue is harder it span up too easily on hard surfaces and wore out. On things like the pump track in the pictures, the mini pins are immense. 2) Connected to 1 - Be honest about where you drive. Having burnt through cool looking buggy tyres I now have a second set of wheels (Schumacher Flexlite read, Tamiya Dish Front both in black) with Schumacher RT1s and medium inserts for tarmac. 3) Suspension - I'm using the DF03 (not a typo, the 4WD car) setting springs, hard rear, softest front. Both are firmer than the kit springs. The DT-03 settings springs were right out because the colours would have looked rubbish if I'd needed the red ones. Yes, I am enough of a tart for that. Plus, couldn't see the point of a softer set of springs if the kit springs were in the middle. I saw the DF03 springs suggested on a thread on here I think. Great call. I got the TRF 54043 piston rods for the rear shock and standard CVA mini shock shafts 50601 for the front and used the kit sprues and some e-clips to convert the dampers to proper pistons. After some experimentation I'm running single hole pistons with the kit Soft Tamiya 400 CST oil 4) I got the anti roll bars, but have ended up not using them. Now I have the suspension firm enough to hold the car up it handles fine without the anti roll bars. IMHO. 5) I used the leftover ball studs from the unused roll bars to replace as many of the step screws in the damper mounts as possible. Much nicer and less rattly I got a bag of ball connectors (50591) to finish the job off, although the fronts need a bit of filing to get them to fit the wishbones. 6) Turnbuckles - Don't be a cheapskate like me and pick up a cheap DT02 set, as the steering arms don't fit! These do seen good for getting the grip up though. 2-3 neg both ends. 7) Driveshafts - I had no issues with the toughness of the plastic driveshafts, but I couldn't believe how much they restrict suspension movement. I didn't want to spend out on Universals as I'm not racing. I ended up taking a leaf out of the Sand Viper book and went to the metal driveshaft and cups. Only cost about a tenner for the parts, and the car stands up at the rear about another 10mm! They look better too, IMHO. Parts are: Shafts - Tamiya 9805551 Outdrives - Tamiya 9804237 Hub end cups - Tamiya 50823 8) Geared diff with the kit seems fine. I stuffed it with grease as advised somewhere on the internet and does fine for me. 9) Kimborough servo saver was a fiver well spent. Much more crisp steering. 10) Not sure if the Hop Up servo mount was £18 well spent, but it looks pretty and does look into the chassis and servo much more firmly. I'm open on this one as it's pretty expensive. Hope you like it, and hope that helps anyone looking at getting a DT-03. Cheers!
SOLD: Hotshot Re:Re NIB(ish) with EXTRAS!!
Juhunio posted a topic in Sales, trades & wantedNow SOLD, please delete HEADLINE: FS Hotshot Re:Re (58391), NIB(ish), all parts present and correct, all parts as new, plus about £100 worth of extras: Tamiya TBLE-02ESC (£20) Etronix ET0012 9.0kg Heavy Duty Metal Geared Waterproof Servo (£18) Tamiya 54002 Hotshot Ball Bearing Set (£23) Tamiya 54501 TT-02 Aluminium Prop Shaft (£6) Tamiya 19805368 Diff Cups (x2 pairs) (£12) Jazrider Red Aluminium Front Knuckles (£10) Fastrax buggy wheel / tyre set / multi spoke / black / front and rear (£20) Extra / spare set of 0986139 front knuckles Partial spare D and E Parts trees £200 all in for collection from Cardiff, £15 for insured UK shipping. Payment by PayPal f&f. Here's a lot more detail, and some more pics: I've decided to sell my Hotshot Re:Re. The first two kits I built when I got back into this a couple of years ago were the heroes of my youth, a Bigwig and a Boomerang. I run them, I love them, and while I think the Hotshot is probably the best looking of the three, it's just way too similar to the other two, so it's time to move it on... So, the headline says that it's New in Box(ish). Lemme explain.... The kit is 100% complete, and every part is present, correct and brand new All plastic part bags are unopened However, I had some plans for alterations, which meant that at some point I opened up about 50% of the metal parts bags Some of them are still sealed and as new: But others have been opened. I've been through the manual and can confirm that every single screw, nut, bolt, e-clip, o-ring, screw pin and bushing is present and correct. I've repacked the open bags into clip-strip bags and labelled which bag they are, so everything is still stored (and can be built) as per the manual All body parts, wheels, tyres, stickers etc are as new The sale includes about £100 worth of extras as detailed above And a few extra plastic bits too....I planned to change the bulk of the red parts to black, so bought an extra set of D Parts and E Parts and set about painting them. They're included, so you can either use or bin the black ones, but the ones I didn't paint will make handy extra spares I've even thrown in a bag of Haribo for that true 'new kit' experience! And not just a 'fun-sized' bag either...the full size job! What a guy
All BRAND NEW & UNOPENED. Why I’m selling: Returning to a 90 hour a week job has left me with no time, so I’m selling my TRF419XR as well an extensive and, in some cases, extremely rare, collection of upgrades that took months to source. What you see includes some almost unavailable and therefore very rare items that took hours of obsessive work to collect. Knowing how hard it was to gather this collection means it’s for someone who wants all options available for the amazing TRF419XR, so I’m sorry to say, I will not be willing to split it. I wish to return around 80% of what it all cost me, so any purchaser is not only benefiting a reduction in retail price, but also from the reduced purchase hose prices from buying abroad, which I had to do to finish this collection but from the hours and hours it took to gather everything. Moving on: The main upgrade included in the bundle is the TRF420 Suspension upgrade. To prove how extensive the bundle is, it also comes with the rear Toe Control Rear Suspension Set for the TRF420. Also included is the correct 3mm TRF drill bit to ream out the arms, and I even managed to find the unique carbon fibre alternative arm connectors that are only available with the actual TRF420 kit! That wasn’t easy. Before we get to the collection: I’m also selling a complete (and I mean complete) TRF Tool Set to go with it, as well as some top line professional equipment, please see my other listings for full details. However, to wet your appetite, here’s a few of them so you get the idea as to the level of what else is for sale: **THE FOLLOWING ITEMS ARE NOT INCLUDED IN THIS BUNDLE BUT AVAILABLE SEPARATELY. HOWEVER, THEY WERE BOUGHT TO GO WITH THIS KIT SO I WILL DISCOUNT ANYTHING BELOW BY 20% IF BOUGHT BY WHOEVER BUYS THIS BUNDLE** - A Complete Tamiya TRF tool set - - Futaba T7XC Transmitter - - Futaba HPS-CB700 Brushless Servo - - Team Orion Vortex R10.1Brushless ESC - - Team Orion Vortex DSB-R Program Box - - SkyRC T200 Duo AC/DC 12A Charger - - Intellect LiPo LiHV 2S 1000mAh 7.6v Batteries (2 available) - - TRF Trolly Bag - + more..... ** THE ABOVE ITEMS ARE AVAILABLE SEPARATELY. ** I WILL DISCOUNT ANYTHING ABOVE BY 20% IF BOUGHT BY WHOEVER BUYS THIS BUNDLE** (Please see my other listings for full details) AGAIN THESE ITEMS ARE NOT INCLUDED IN THIS BUNDLE Finally, here’s the list of what’s included in this rather unique bundle: **TO BE CLEAR, THE FOLLOWING IS EXACTLY WHAT’S INCLUDED IN THIS BUNDLE: TAMIYA: - 42316 - TRF419XR Racing Chassis - 54886 - TRF420 Suspension Upgrade Set - 54887 - TRF420 Toe Control Rear Suspension Set - 1980322 - (unique) Carbon Fibre Arm Connectors - 42303 - TRF 3mm Straight Reamer - 54413 - Aluminium High-Efficiency Roll Damper - 42325 - Aluminium Gear Differential Case - 42310 - 37T Aluminium Differential Pulley - 42309 - 37T Aluminium One-Way Pulley - 3454938 - Drive Pulley Assy (Blue) - 3454936 - Main T-Pulley (Blue) - 53906 - 5x5mm Alumium Hex Head Ball Connectors X2 - 53907 - 5x8mm Aluminium Hex Head Ball Connectors X3 - 54648 - Flurine Coated Stabilizer Ball Connector Set - 42327 - 5x 3x6mm Hi-Grade Aluminium Hex Head Screws (Blue) X5 - NAR-306TB - 3x 3x6mm Hi-Grade Aluminium Hex Head Screws (blue) (by SQUARE) X3 - 42329 - 5x 2x8mm Hi-Grade Aluminium Hex Head Screws (Blue) X3 - 42330 - 5x 3x8mm Hi Grade Alu C/Sunk Hex Head Screws (Blue) X3 - 42328 - 5x 3x6mm Hi Grade Alu C/sunk Hex Head Screws (Blue) X3 - 53773 - 5x 3x10mm C/sunk Hex Head Screw (Blue) X1 Moody Fools: - 1509786741 - 6x 3x8mm C/sunk TITANIUM Hex Head Screws - 1509786741 - 38x 3x6mm C/sunk TITANIUM Hex Head screws Back to Tamiya: - 53646 - Wheel Spacer (Blue) X3 - 54863 - Aluminium Hi-Torque Servo Saver Cap (Blue) - 42248 - Aluminium Direct Servo Horn (Tamiya/Futaba) (Blue) - 54862 - 4x Aluminium Servo Screws (Blue) - 42224 - 04 Module Hard Coated Alu Pinion Gear (25T) - 42229 - 04 Module Hard Coated Alu Pinion Gear (30T) - 42269 - 04 Module Hard Coated Alu Pinion Gear (39T) - 42201 - Glass Tape (15mm x 50m) (Blue) 3RACING: - M04M-07/LB Aluminium Motor Heatsink With Cooling Fan (Blue) TOTAL COST TO ME £ 1,420.00 The following items are FREE: - 42250 - Maintenance Mat (1250x600mm) Black with TRF logo (opened to be used in my photos, but unused otherwise. - DTDR01001B - Hobbt Details Aluminum Magnetic Body Mount Set for 1/10 Drifting Cars Set A Type Black DTDR01001 Aluminium (Blue) - Aluminium Adjustable Magnetic head for Body Mount (Blue) - Velcro in Blue to match Tamiya Blue - Zip Ties in Blue to match Tamiya Blue - A4 Carbon Fibre Self Adhesive Sticker Sheet (it is in the image, but hidden under all the parts in the top right of the image) The FREE items cost me around £50 Dispatched with Hermes Tracked.
The Clodbuster trap. Help me
wolfdogstinkus posted a topic in General discussionsLong story short, I've fallen in the Clod hole. I miss my old 6x6 wild dagger, so I battered my PayPal credit account and will be building a 6x6 Clod. Yay. So I need the outer plastic drive hubs but they are only available on the gearbox tree. The metal ones available confuse me with all the different conversion kits. As well as the metal parts often cost more than the plastic ones. For the price of replacing a few parts on an axle, I could have bought the whole axle kit. But looking at it,,, it is missing the plastic hubs,,, soo there must be a stockpile somewhere??? Or is it easier?/ Cheaper to just do a hex conversion?? Also the metal uprights that are available look like they still need the original Clod parts so I'll probably have a stockpile of gearbox halves before I even start.
Selling up my collection over the next few months,please do keep an eye open for some very rare and sought after Tamiya items. Feel free to PM me any questions. Thanks for looking. Very best of luck. https://www.ebay.co.uk/sch/anchordriver/m.html?item=182155358527&hash=item2a694e313f%3Ag%3AauQAAOSw3R1XTta5&rt=nc&_trksid=p2047675.l2562
Hello NOOB From Down Under
ELEPHT70 posted a topic in General discussionsHello guys my name's Craig, I'm from Melbourne, Australia and I think I'm going through a mid-life crisis of sorts at the age of 40 haha as I just last week picked up an old Tamiya off one of the local buy/sell sites and I now have another two cars coming in the mail lol. I was off work with a virus and started looking through the local rag with the search criteria being "VINTAGE TAMIYA" and I came across a 1996 (hardly vintage but old enough) Fighter Buggy RX for the princely sum of $25.00AUD! I'd actually never heard of them and after some quick googling I found them to be on the DT-01 chassis which was shared by the likes of the Grasshopper and Hornet so I thought it wouldn't be too bad as I recognised those two models from my older cousins who had them back in the '80's. The photos on the ad weren't the best but I made contact expecting it to have been sold already. I picked it up later that morning. I think it was a pretty good score. After checking it out I found the original manual to be in excellent condition, along with basically everything else. The stickers (sadly they're missing from the box) had never been fitted to the body which barely had a mark on it and the only thing missing was one of the hex drive nuts from the rear axle. The back tyres are worn below halfway and the front are hardly touched. I'm going to guess and estimate less than 10 batteries were put through the car before it was put back into it's box and forgotten about. The missing hex splined nut prolly got lost somewhere along the way and that was that for the little buggy's life. Until 21 years later I come along and start cleaning it up! Nothing in my house stays "stock" for long so I got researching for some good ideas on tricking out this little gem to go a bit harder. And look a little cooler as well. That's how I found this Web site and I'd like to congratulate all of you on sharing your knowledge, love and passion for the hobby. I'm truly grateful and was so pumped I felt compelled to sign up and say g'day! Right, where was I... So after a bit of online research and chatting to a friend about some crazy things to do the first thing I did was order a FLY SKY FS-GT3B remote, the 12mm splined hex wheel hubs and a full set of sealed bearings for the diff and wheels. I then read about someone using a turnbuckle kit from another model's hop up parts bin so I ordered it (#53300) for the steering link. Then I ordered a better steering servo. A Hitech HS-5485HB digital jobbie that should provide a bit more reliability. I then got an iMAX B6AC battery charger. Then I got a bit excited. I ordered a 4300kV brushless motor and ESC combo lol. Nothing exotic just a GoolRC waterproof 3650 4300kV with a 60A ESC. I've read some pretty good reviews and for less than $61AUD posted I thought what the heck. Then a set of Wild Willy 2 chrome wheels which have an amazing negative offset to give some fat dish (and widen the track a bit - helps roll over prevention - learnt that one from someone in here) and the correct uprights with the slightly longer axle (#0445169 & #0445207) got the nod along with some blue anno nyloc wheel nuts. I just have to find some excellent quality tyres for the odd wheel size. Haven't managed to find a modern tyre in that size as yet... Some blue anno adjustable oil filled alloy shocks (100mm rear, 85mm front) are on order as well. I then ordered a MAD BULL body shell as I didn't want to destroy the beautiful original condition FIGHTER body shell as this thing is prolly going to be crashing alot... I'm going to paint it French Blue with a pearl clear. I've always loved the finish on the '95/6 Hoffman Bikes Taj model bmx in the baby blue colour so I loosely matched the colour off a pic on my phone to the colour of the caps in the Tamiya spray colour rack in the hobby shop lol. It won't stay pretty for long, though... Then, the silliest choice of all was a 4500mah 3S 40C lipo battery lol. I think I'll start this buggy off on a 2S lipo for now till I get used to it and get the chassis/suspension/steering dialled in. I'm prolly going to get some threaded rod and make a stronger, adjustable steering rod to replace the soft plastic ones it came with. I might even get into making a double wishbone front end in the future... When replacing the plastic bearings in the diff I cleaned it all out and repacked the center with sticky synthetic helicopter prop grease. Should do the trick in keeping both wheels humming. I hope... I'll need advice on gearing too, please guys and gals. Feel free to offer your knowledge... I'll be making a wheelie bar, installing some dune buggy lights and crashing the badword out of this thing hopefully soon! I'm still waiting on quite a few parts to arrive but in the meantime I've pulled the whole thing apart and given it a clean and I was pretty chuffed at the overall excellent condition of everything. Even the batteries still work perfectly after only one quick charge and a test in my mate's Stadium Thunder so I'd hazard a guess to say that everything is in working order. I'll prolly never know as I've ripped it all out lol. I'll try to include some pics and if any of you guys think I'm either doing the wrong thing or would like to offer some constructive criticism please feel free to get stuck into me lol. Really, I'd love to hear your thoughts. Anyways I'll update this thread as parts arrive. Cheers for now, Craig.
I want to mad a Grasshopper
twisted posted a topic in Re-Release DiscussionsHello all, Like many my 1st rc hobby grade wise was a Grasshopper. I have a restored vintage one that sits on a shelf but I was thinking of getting a re re for a project. I primarily race modern cars and I do not fool to much around with the older ones but thats going to change. I recently seen a Grasshopper on ebay that was heavily modded and honestly that was what got me interested in building one again. My goals are to make the suspension the best it can be with what is out there. Can you guys point me to some pics,manufacturers, 3-d printers etc that can help me make this happen. Thanks George
For sale:- Tamiya RM01 58509
super gripper posted a topic in Trade ArchiveFor Sale:- Tamiya Toyota Toms RM01 with all hop ups This RM01 has every hop up either fitted or new in packet waiting to be fitted (only a couple to do) the car has never been run, comes with the high grip tires basically better than the RM01X just without the carbon fibre chassis all brand new, never run. - screw box also, not in pic £180 posted UK
For Sale :- Tamiya DB01R with hop ups
super gripper posted a topic in Trade ArchiveI have my last Tamiya DB01R for sale. the kit comes with a huge amount of hop ups included, I have added a bucket load more £150 posted in the UK