Search the Community
Showing results for tags 'teu-101bk'.
Found 1 result
-
Hi there I need some help please with my vintage Tamiya RC car. Today i tried to use the car but i cannot control it from my reciever. So i tried to set up the ESC and followed the instruction manual guide, trolled through Youtube etc and i got nothing at all. The set up i have is as follows: Transmitter - 2Ch Acoms Techniplus Transmitter Crystal - 27.045Mhz Reciever - Acoms 2Ch reciever (AR-2 /27) Reciever Crystal - 27.045 ESC - Tamiya TEU-101BK So, here is how everything is connected in my car. The reciever has the steering server connected in Channel 1 socket and ESC is plugged in to the Channel 2 socket. The ESC has its battery connected too. During setup the motor was disconnected. I followed the procedure where the transmitter was in neutral settings etc . I switched on the power switch and then pressed the set button for about 1sec. Then i pushed up the (CH2) stick and pressed set and then pushed it down and pressed set. The lights did not change or do anything. I switched of the power and switched it on again. The ESC beeped twice and the red LED flashes away with a beeping too. I also noticed the the wheels are twitching and the steering servo also twitches now and again. I understand that previously i would hear this beeping noise (when the car was working ) when the transmitter was disconnected and when switched on the beeping noise would go and the car would be drivable. These are the checks that i have carried out. - Transmitter works well on other cars using the same 27.045Mhz Crystal. -Replaced the ESC and Acoms recioever. -Checked wiring etc So, cxan anyone give me any other fresh ideas to what i need to do please? Any help much appreciated. Thanks