OnTheTrail 1152 Posted January 19, 2022 Just thinking about this last night while digging through my RC tools. Just curious how many of the standard R/C 4-way wrenches you folks have accumulated over the years. I'm a newbie so I've only got about a dozen. I'm sure one of them is from my 30+ year old Blackfoot. I'm also going to guess some of you have a bucket of these. LOL 1 1 Share this post Link to post Share on other sites
Ferruz 11702 Posted January 19, 2022 Ahah that's a good one! I don't have that many kits that I bought brand new -at least not so far- so I reckon I only have 5 of them. Share this post Link to post Share on other sites
toyolien 4681 Posted January 19, 2022 I have a pen pot full of them. I guess there must be 50, maybe more. 2 Share this post Link to post Share on other sites
Willy iine 18806 Posted January 19, 2022 @OnTheTrail You call yourself a newbie and already have over a dozen.. scary to think how many you would have when you consider yourself master RC-man. I have a few.. I always wonder what to do with them and have it stored away in a bin and just use it as weight for various projects... like I have 3 of them in my paint brush holder I made. 1 2 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted January 19, 2022 I've got loads of cross type , I've also got a double ended 4 /2 ( not a cross shape) with a hole through the middle for a toggle bar and I also Marui , HPI ( and Kyosho I think ) . Can't have enough tools I think 2 Share this post Link to post Share on other sites
Willy iine 18806 Posted January 19, 2022 Yeah, I have an HPI one too. Those are cool because it has a ball end cup, very useful. 1 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted January 19, 2022 8 minutes ago, Willy iine said: @OnTheTrail You call yourself a newbie and already have over a dozen.. scary to think how many you would have when you consider yourself master RC-man. I have a few.. I always wonder what to do with them and have it stored away in a bin and just use it as weight for various projects... like I have 3 of them in my paint holder I made. I've got that HCT on my shelf with a ton of small scale cars - I love to collect these little guys 1 Share this post Link to post Share on other sites
alvinlwh 5895 Posted January 19, 2022 Just counting the number of Tamiya I have and I can work that out. 1 x Lunchbox, 1 x TT-01, 1 x M-05Ra, 2 x SW-01s, 1 x SU-01, 1 x DT-02 and 1 x M-06. But they do not come with the SW-01s or SU-01, so final answer is 5. A different question, I wanted to switch to more "professional" tools but 7mm socket will not fit some of the deeper wheels as their walls are too thick. Are there any thinner sockets out there? Share this post Link to post Share on other sites
moffman 5752 Posted January 19, 2022 Good thread! As it stands as of today I have 21 in my tool box I would like to know what was the first kit to have them? 2 Share this post Link to post Share on other sites
Willy iine 18806 Posted January 19, 2022 3 minutes ago, KEV THE REV said: I've got that HCT on my shelf with a ton of small scale cars - I love to collect these little guys Cool. I got a bit jelly when @Re-Bugged showed me his Wild Mickey. 1 Share this post Link to post Share on other sites
Willy iine 18806 Posted January 19, 2022 2 minutes ago, moffman said: Good thread! As it stands as of today I have 21 in my tool box I would like to know what was the first kit to have them? Nice. May not be fair because I was not the original purchaser, but one of them was from a 1981 58035 M38 Wild Willy SWB version I bought used... and restored (the car, not the wrench.. lol) 2 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted January 19, 2022 11 minutes ago, Willy iine said: @OnTheTrail You call yourself a newbie and already have over a dozen.. scary to think how many you would have when you consider yourself master RC-man. I have a few.. I always wonder what to do with them and have it stored away in a bin and just use it as weight for various projects... like I have 3 of them in my paint brush holder I made. Cool brush holder !! - I've just got some expanded nylon block to stuff my brushes in - it works though 1 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted January 19, 2022 4 minutes ago, alvinlwh said: Just counting the number of Tamiya I have and I can work that out. 1 x Lunchbox, 1 x TT-01, 1 x M-05Ra, 2 x SW-01s, 1 x SU-01, 1 x DT-02 and 1 x M-06. But they do not come with the SW-01s or SU-01, so final answer is 5. A different question, I wanted to switch to more "professional" tools but 7mm socket will not fit some of the deeper wheels as their walls are too thick. Are there any thinner sockets out there? I use a wheel 'driver' like a screwdriver but with a socket on the end Share this post Link to post Share on other sites
Willy iine 18806 Posted January 19, 2022 3 minutes ago, KEV THE REV said: Cool brush holder !! - I've just got some expanded nylon block to stuff my brushes in - it works though Thanks. I was originally using spent spray can caps, but they're too light and the bottom was open so decided to make one a tad taller out of styrene and added the weights inside. I mean with your talent, you can easily make something like this, I believe. We've seen your factory finish motor covers. 1 Share this post Link to post Share on other sites
alvinlwh 5895 Posted January 19, 2022 1 minute ago, KEV THE REV said: I use a wheel 'driver' like a screwdriver but with a socket on the end Fixed? I am hoping to use one that can be swapped out for other bits so that one tool (handle) can do it all. 1 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted January 19, 2022 I mean with your talent, you can easily make something like this, I believe. We've seen your factory finish motor covers. You're too kind 1 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted January 19, 2022 1 minute ago, alvinlwh said: Fixed? I am hoping to use one that can be swapped out for other bits so that one tool (handle) can do it all. I also use a 1/4" drive socket set with std. and long reach sockets that go down to the smallest sizes to work on just about anything on RC Share this post Link to post Share on other sites
alvinlwh 5895 Posted January 19, 2022 Just now, KEV THE REV said: I also use a 1/4" drive socket set with std. and long reach sockets that go down to the smallest sizes to work on just about anything on RC I need to look somemore, mine will not fit in the deeper wheels. Share this post Link to post Share on other sites
Willy iine 18806 Posted January 19, 2022 For me, when the tools get this small, I prefer to used fixed neck tools as the play is just too much even on my expensive ratchets and drivers. 1 Share this post Link to post Share on other sites
markbt73 5316 Posted January 19, 2022 Oh, man. A lot. I find them in weird places all over the house, too, because they happened to fit (or fit close enough) some other thing I was fixing. I have a couple of super-sized ones from Kyosho nitro kits from the '90s that are super useful: they're 5.5, 7, 8, and 10mm. Share this post Link to post Share on other sites
Busdriver 6209 Posted January 19, 2022 I have about 20 but perhaps a bigger question is how many nylon/brass bushes do you have and even better what clever hacks have you done to use them. I managed to use half of one to make the base of an air brake handle on my Dynamog!!!! Share this post Link to post Share on other sites
El Gecko 1344 Posted January 19, 2022 Just two, both vintage originals. The one that came in the box of junk with my Frog, which by now is nearly rounded out on most ends, and one in better condition that came with either my Grasshopper or Hornet (most likely the Hornet as that kit was newer and more complete). For most wheels I use a socket bit in a 1/4" hex driver like @KEV THE REV, but I'm still looking for a socket with thinner walls that will fit the deeper wheels like @alvinlwh mentioned. Share this post Link to post Share on other sites
markbt73 5316 Posted January 19, 2022 12 minutes ago, Busdriver said: I have about 20 but perhaps a bigger question is how many nylon/brass bushes do you have and even better what clever hacks have you done to use them. I managed to use half of one to make the base of an air brake handle on my Dynamog!!!! When we re-tiled our kitchen backsplash, I needed something to space out the electrical sockets away from the wall a bit so they were even with the face of the tile. I found that two 5x11mm bushings under each screw were the perfect spacers. 2 Share this post Link to post Share on other sites
alvinlwh 5895 Posted January 19, 2022 1 minute ago, markbt73 said: When we re-tiled our kitchen backsplash, I needed something to space out the electrical sockets away from the wall a bit so they were even with the face of the tile. I found that two 5x11mm bushings under each screw were the perfect spacers. Now, if OP was to ask how many bushings we accumulated, that will take a bit of working out... Share this post Link to post Share on other sites
El Gecko 1344 Posted January 19, 2022 12 minutes ago, alvinlwh said: Now, if OP was to ask how many bushings we accumulated, that will take a bit of working out... Easy if you use the little plastic sleeves/cylinders the bearings came in to store the bushings you took out. 10 bearings a sleeve/10 bushings a sleeve Share this post Link to post Share on other sites