Rb4276 803 Posted November 12, 2022 I see now as of today it is still a preorder but now $250 Share this post Link to post Share on other sites
tamiya3speed 463 Posted November 12, 2022 I got a shipping notice on mine today so sounds like they got at least a few in. Share this post Link to post Share on other sites
RichieRich 685 Posted November 14, 2022 Yeah, I got a shipping notice this morning so I guess they are knocking out orders. Share this post Link to post Share on other sites
RichieRich 685 Posted November 17, 2022 ...and it was delivered this afternoon. Yay! Share this post Link to post Share on other sites
MikeLouieTKD 10 Posted December 23, 2022 I checked the box to email me when some are available since I missed the original shipping date. Just got mine today! Can't wait to build and possibly run indoor off road carpet. 17.5 motor going in but not sure what else yet. 1 Share this post Link to post Share on other sites
Rb4276 803 Posted December 23, 2022 I ordered mine today. i have no idea when i will get to it since i still never built my optima mid. Id rather have it then have it be discontinued. 1 Share this post Link to post Share on other sites
Rb4276 803 Posted December 24, 2022 Does anyone make a cougar classic hex screw set? 1 Share this post Link to post Share on other sites
RichieRich 685 Posted December 27, 2022 I've never built a Schumacher before. I finally started assembly and I've had to use the 3mm tap for bag A steps. Is that normal? Share this post Link to post Share on other sites
moffman 5752 Posted December 27, 2022 On 12/24/2022 at 5:13 PM, Rb4276 said: Does anyone make a cougar classic hex screw set? 95% of my tools are schumacher with all the different hex drivers and nut drivers purely because I bought a second schumacher cat k1 a fair few years ago and the guy was giving up racing and kindly give me his tool collection because he said they probably won't be any good for anything else but I've use them on a variety of other things Share this post Link to post Share on other sites
toyolien 4681 Posted December 27, 2022 On 12/24/2022 at 5:13 PM, Rb4276 said: Does anyone make a cougar classic hex screw set? 4 hours ago, moffman said: 95% of my tools are schumacher with all the different hex drivers and nut drivers purely because I bought a second schumacher cat k1 a fair few years ago and the guy was giving up racing and kindly give me his tool collection because he said they probably won't be any good for anything else but I've use them on a variety of other things @moffman I think @Rb4276 was asking if anyone makes a hex hardware screw kit for the Cougar Classic. I'd like to know this too. 1 Share this post Link to post Share on other sites
Rb4276 803 Posted December 27, 2022 3 hours ago, toyolien said: @moffman I think @Rb4276 was asking if anyone makes a hex hardware screw kit for the Cougar Classic. I'd like to know this too. Yea i’d prefer a hex set, id probably pull alot together from my spares but would be a pain 1 Share this post Link to post Share on other sites
moffman 5752 Posted December 28, 2022 14 hours ago, toyolien said: @moffman I think @Rb4276 was asking if anyone makes a hex hardware screw kit for the Cougar Classic. I'd like to know this too. Are sorry I misunderstood I'm sure they probably do if you go on to racing-cars.com which is Schumacher's website they have a load of manufacturers they import/own which include equipment etc and if one of those manufacturers are tools based I'm sure it's going to have equipment for schumacher cars/buggies? Share this post Link to post Share on other sites
StueyS 41 Posted December 29, 2022 I started building my son's Cougar today. One thing I have done so far is replace the 10mm screws (that imo are not quite long enough) which are used in the steering bellcranks and drag link. I have now used 12mm and nyloc nuts to save using threadlock and they go right into the nut now. Share this post Link to post Share on other sites
RichieRich 685 Posted December 29, 2022 Yeah, a new screw set would be a good idea. I've been slowly building mine. Wait till you try and assemble the servo saver. They should recommend wearing safety glasses. Share this post Link to post Share on other sites
Rb4276 803 Posted February 6, 2023 I started my cougar build yesterday. I am taking my time. I am up to the servo saver which I ended up using a tamiya hi torque saver I had laying around from my txt 2. Couldn’t believe what a pain in the *** the ball cups were snapping on until I realized you can kind of slide them over to pop them on. I will continue if next weekend, it is nice having each steps in a bag going slowly. 1 Share this post Link to post Share on other sites
moffman 5752 Posted February 6, 2023 9 hours ago, Rb4276 said: I started my cougar build yesterday. I am taking my time. I am up to the servo saver which I ended up using a tamiya hi torque saver I had laying around from my txt 2. Couldn’t believe what a pain in the *** the ball cups were snapping on until I realized you can kind of slide them over to pop them on. I will continue if next weekend, it is nice having each steps in a bag going slowly. You just enjoy the build matey and take as long as it takes! I always find if you try and get a kit finished quickly especially a schumacher kit you make stupid mistakes which on a schumacher kit can be a bit frustrating! And I really look forward to seeing the finished masterpiece my first classic schumacher (the xls) took me about 6 weeks to build going back to it for a few hours every other day or so! But as you get used to these kit it becomes a lot easier because you start to find little hacks and methods that make it that little bit better 2 Share this post Link to post Share on other sites
Rb4276 803 Posted February 7, 2023 Someone on facebook told me to make sure to glue the layshaft. Did anyone else do this? 1 Share this post Link to post Share on other sites
moffman 5752 Posted February 7, 2023 5 hours ago, Rb4276 said: Someone on facebook told me to make sure to glue the layshaft. Did anyone else do this? I definitely did on my xls and probably topcat aswell (can't remember TBH) but I never on the cougar classic and pro cat they have made the actual gear and the washer you had to glue on the previous 2 kits a one piece item! The only thing you glue is the plastic washer onto the metal washer that connects the ball diff bearings together! 1 Share this post Link to post Share on other sites
Rb4276 803 Posted February 7, 2023 3 hours ago, moffman said: I definitely did on my xls and probably topcat aswell (can't remember TBH) but I never on the cougar classic and pro cat they have made the actual gear and the washer you had to glue on the previous 2 kits a one piece item! The only thing you glue is the plastic washer onto the metal washer that connects the ball diff bearings together! Thank you Share this post Link to post Share on other sites