Avante Egress query

[DGunn1 61]

Hi all,

I posted already in the wanted section for 3 chassis stays common to the avante and egress, however does anyone know if there is an alternative as building a runner from parts.

Wondered if the top force/evo ones would work as they look more readily available, but do not have measurements for either. Does anyone with an avante/egress and a top force/evo know whether deck spacing is the same between the chassis types?

Thanks in advance

[Sgt.Speirs 1317]

My Top Force Evo (DF01) is still in the box, but the Porsche 934 Black Edition (TA02SW) has the same spacing between lower and upper deck.

Porsche 934: 36 mm

 

Egress: 25 mm

[DGunn1 61]

Thanks for taking a look, much appreciated. Will have to search for an alternative solution.

[Willy iine 18823]

If you're in the USA, I would check McMasterCarr.  They sell a whole bunch of different fasteners and I am sure you can find something that would work as deck support.  

If you're looking to make something for cheap, then that may not be the place.  

[Bullitt3577 35]

Check eBay, I searched 36mm standoff and the first one had brass ones in m3x36 as an option

[DGunn1 61]

Good call, checked 25mm standoff and found these. Will see if there are anymore faithful reproductions otherwise these will do the trick.

[moffman 5925]

 this forum (and I've been a member of a few forums over the many years) still amazes me how there is always someone who knows of somewhere or someone that can fix whatever problem little or small!.......its soo cool 

[DGunn1 61]

If anyone has the same issue, these are available in 25mm from eBay, and without the knurling so shouldn't mark battery cases.