Tamiya eco battery Switch for very old ESC (Clod Buster) ?????

[The Knight 51]

I need a simple on/off switch for the my LED light kit in clod buster chassis.

So I see the battery (eco) terminator switch. The holes measure 46mm distance.

Where I can get a simple switch in this size? I don't know the industrial standard....

[alvinlwh 5894]

Standard Tamiya switch size? I asked the same question before and was told it is JST switch. 

 

[The Knight 51]

I mean number 11 in picture above!

This is the eco switch, holes distance is 46mm.

I do NOT mean on/off switch!

[The Knight 51]

I found this: Tamiya 75015

Is this right switch?

[alvinlwh 5894]

4 minutes ago, The Knight said:

I found this: Tamiya 75015

Is this right switch?

That only has an overall length of 22.2mm (mounting holes 20mm apart) your mounting holes alone is 46mm apart. This is less than half the size of what you will need based on your measurement. 

Based on the picture, I am guessing it is some kind of DPDT switch, and based on your measurement I will look at those meant for mains 120v/240v type. 

[El Gecko 1343]

Possibly this? The power/eco switch changes the motors from series to parallel wiring.

https://tamiyabase.com/parts/2785-17325019

But any switch with the right hole dimensions should work since you just need a simple on/off function for the LEDs. It's just a matter of finding one.

[The Knight 51]

I've got the last one in world (not USA) in germany after (long) search: 17€ incl. shipping for a 40 years old switch. thanks god for it.

*prey*

[Andreas W 1555]

It's nice to see a price tag in the good old D Mark again .

 

A true signum of the age of this.