IXLR8 1154 Posted February 20, 2023 Actually, it's the body sides that are screwed to the cage that I was referring to. I can't see how a battery is going to slide in where his index finger is in this image without forcing the body sides apart. The gap doesn't appear wide enough. I guess we'll just have to wait and see. Share this post Link to post Share on other sites
Kol__ 3377 Posted February 20, 2023 49 minutes ago, IXLR8 said: Actually, it's the body sides that are screwed to the cage that I was referring to. I can't see how a battery is going to slide in where his index finger is in this image without forcing the body sides apart. The gap doesn't appear wide enough. I guess we'll just have to wait and see. I guess for now we have to assume that the battery fits between or behind the tops of those two side panels as it slides in, it looks like the gap is about 3 fingers width, so about the same as a standard Tamiya sized battery. I can't see why they would have one panel velcro and the others bolted on if it wasn't for ease of getting the battery in. 1 1 Share this post Link to post Share on other sites
GeeWings 2830 Posted February 21, 2023 I was VERY excited about this when I first saw the pictures and videos. Now the initial excitement has died down a little less so. I get that it's necessary but the plastics for the arms and shock mounts etc are a bit bulky and cheap looking and the wheels and tyres are a little off too. Don't get me wrong; I'm still getting one and I'm really hoping it ends up being the great combo of pretty good old school aesthetic with more modern design for better handling and durability. I just don't look at it as lustfully as I did! 4 Share this post Link to post Share on other sites
Nicadraus 6198 Posted February 21, 2023 I don't understand why Tamiya engineers had to complicate battery placement with their new kits such as this & the TD4. As seen in the video, it'll take so much time (and a tweezer ) to get the battery in and out. If they were aiming for the serious RC racers, then that's one way to shove them off from buying. 7 hours ago, GeeWings said: I was VERY excited about this when I first saw the pictures and videos. Now the initial excitement has died down a little less so. I get that it's necessary but the plastics for the arms and shock mounts etc are a bit bulky and cheap looking and the wheels and tyres are a little off too. I have the same thoughts. But let's see. If they come up with really nice hop-ups such as carbon fiber & nice blue aluminum pieces, then that will make me want to buy this even more. 1 Share this post Link to post Share on other sites
Kowalski86 3034 Posted February 21, 2023 19 minutes ago, Nicadraus said: I don't understand why Tamiya engineers had to complicate battery placement with their new kits such as this & the TD4. As seen in the video, it'll take so much time (and a tweezer ) to get the battery in and out. If they were aiming for the serious RC racers, then that's one way to shove them off form buying. I think the battery placement on the BBX will help with weight distribution if you run NIMH. I can't speak for the TD4 though, maybe because its an Avante and all Avantes must be overly complex? 2 Share this post Link to post Share on other sites
GeeWings 2830 Posted February 21, 2023 3 hours ago, Nicadraus said: I have the same thoughts. But let's see. If they come up with really nice hop-ups such as carbon fiber & nice blue aluminum pieces, then that will make me want to buy this even more. Yep, and don’t get me wrong, I’m definitely getting one but it’s just not quite as pretty as I first thought. Looks like it’s going to be a great runner though. Share this post Link to post Share on other sites
IXLR8 1154 Posted February 21, 2023 I'm probably stating the obvious but manufacturers risk losing buyers if they announce a model too far ahead of when it's ready to ship. This has happened with me a few times. I've pre-ordered a model, the seller charged my credit card, too much time passed, I lost interest and canceled the order. I don't like waiting and I don't like paying for something months before it arrives. 1 Share this post Link to post Share on other sites
David B 66 Posted February 21, 2023 1 minute ago, IXLR8 said: I'm probably stating the obvious but manufacturers risk losing buyers if they announce a model too far ahead of when it's ready to ship. This has happened with me a few times. I've pre-ordered a model, the seller charged my credit card, too much time passed, I lost interest and canceled the order. I don't like waiting and I don't like paying for something months before it arrives. Not a fan of that either. Tower Hobbies doesn't charge till it's ready to ship. 1 Share this post Link to post Share on other sites
IXLR8 1154 Posted February 21, 2023 1 hour ago, David B said: Not a fan of that either. Tower Hobbies doesn't charge till it's ready to ship. Thanks David. I tend to order from Horizon and forget about Tower. Since Tower and Horizon are under same ownership, I'm curious how (or if) their policies differ. Here's Tower's policy on pre-orders: ... and here is Horizon's: I've gone ahead and pre-ordered a BBX from Tower. I never order from Tower these days but as I think about it, my very first surface RC was ordered from Tower. Back in late 1979, I order a new Sand Scorcher from Tower Hobbies. Share this post Link to post Share on other sites
David B 66 Posted February 21, 2023 Tower almost always has a decent coupon code to clip, I got the BBX for $225 and free shipping. I ordered my very first hobby grade from them back in the 80's. I even remember filling out the order form from their catalog and snail mailing in a money order, my times have changed. 2 Share this post Link to post Share on other sites
IXLR8 1154 Posted February 21, 2023 Hmmm, I missed seeing the coupon code. With tax, my BBX is costing over 278 bucks. I always miss-out on the bargains. Share this post Link to post Share on other sites
ChrisRx718 4470 Posted February 21, 2023 I wonder if the front wheels are bearing-hub or hex-hub. Is there anything to indicate either way yet? As others have said already; the wheel design is a bit 'meh'. It would be good to get ideas about what alternatives would work; ie. FAV style wheels etc. Share this post Link to post Share on other sites
David B 66 Posted February 21, 2023 Front & rear are hex, you can see it in one of the posted videos. 1 Share this post Link to post Share on other sites
David B 66 Posted February 22, 2023 4 hours ago, IXLR8 said: Hmmm, I missed seeing the coupon code. With tax, my BBX is costing over 278 bucks. I always miss-out on the bargains. Might be worth cancelling and re-ordering https://www.towerhobbies.com/coupon-codes/ 1 Share this post Link to post Share on other sites
IXLR8 1154 Posted February 22, 2023 1 hour ago, David B said: Might be worth cancelling and re-ordering https://www.towerhobbies.com/coupon-codes/ Thanks again David. The discount code saved me 25 bucks. 251 with tax. 1 Share this post Link to post Share on other sites
IXLR8 1154 Posted February 22, 2023 4 hours ago, ChrisRx718 said: I wonder if the front wheels are bearing-hub or hex-hub. Is there anything to indicate either way yet? As others have said already; the wheel design is a bit 'meh'. It would be good to get ideas about what alternatives would work; ie. FAV style wheels etc. That's an interesting suggestion. Those FAV wheels might look really good on this buggy. I have a feeling I'll be the only BBX owner who actually likes the kit wheels. In fact, I'm looking for other vehicles in my collection that could use them. Share this post Link to post Share on other sites
IXLR8 1154 Posted February 22, 2023 Is the BBX the first 2wd from Tamiya to use hex wheels up front or are there others? 1 Share this post Link to post Share on other sites
Nick-W 1494 Posted February 22, 2023 17 minutes ago, IXLR8 said: Is the BBX the first 2wd from Tamiya to use hex wheels up front or are there others? TD2 has front hex. Maybe a new mid-range buggy standard. 1 Share this post Link to post Share on other sites
David B 66 Posted February 22, 2023 22 hours ago, IXLR8 said: Thanks again David. The discount code saved me 25 bucks. 251 with tax. No problem! I also picked up a Grasshopper Green Edition for $83.09, love a good discount! Share this post Link to post Share on other sites
Busdriver 6209 Posted February 23, 2023 4 hours ago, Nick-W said: TD2 has front hex. Maybe a new mid-range buggy standard. WT01 and M06? 1 Share this post Link to post Share on other sites
Nick-W 1494 Posted February 23, 2023 8 hours ago, Busdriver said: WT01 and M06? Really? I didn’t know that. The last m chassis I had was an 02 (or 3?), the old MX5, from the nineties and I can’t for the life of me remember. I hadn’t heard of a WT01 before. A quick google and it looks fun. Was it any good? Share this post Link to post Share on other sites
Busdriver 6209 Posted February 23, 2023 3 hours ago, Nick-W said: Really? I didn’t know that. The last m chassis I had was an 02 (or 3?), the old MX5, from the nineties and I can’t for the life of me remember. I hadn’t heard of a WT01 before. A quick google and it looks fun. Was it any good? I love mine!!! Has an Amarok body in the style of a Blackfoot. Great fun truck 🛻 Share this post Link to post Share on other sites
Evetsyelspih 124 Posted February 24, 2023 Towers site now says shipping in March! Share this post Link to post Share on other sites
David B 66 Posted February 24, 2023 That was mentioned a couple days ago Share this post Link to post Share on other sites
Evetsyelspih 124 Posted February 24, 2023 23 minutes ago, David B said: That was mentioned a couple days ago Oops sorry! First time I noticed so got excited. 1 Share this post Link to post Share on other sites