Jump to content
Evetsyelspih

Toyota Hilux High Lift - Wheels and Tires

Recommended Posts

Thinking of buying a Hilux Highlift. Used to have a Ford 350 over 12 years ago which I always regretted selling. I remember wheels and tires were horrible. Are there any suggested tires and wheel sets that do not require you to modify the body and bolt right on? Thanks!

Share this post


Link to post
Share on other sites

The wheels that come with the kit are far too small for my taste.  I fitted rc4wd 1.55 white 8 spokes to mine with 114mm tires.  I've also got some Injora wheels of the same design which are as good quality but cheaper. 

Screenshot_20231021_170424_Gallery.jpg

  • Like 1

Share this post


Link to post
Share on other sites
17 minutes ago, davidwj95 said:

The wheels that come with the kit are far too small for my taste.  I fitted rc4wd 1.55 white 8 spokes to mine with 114mm tires.  I've also got some Injora wheels of the same design which are as good quality but cheaper. 

Screenshot_20231021_170424_Gallery.jpg

Wow that looks great!

  • Like 1

Share this post


Link to post
Share on other sites

Thanks, I've done a few other modifications but it's the wheels that make the most difference to the appearance.  

Share this post


Link to post
Share on other sites

@davidwj95 also thinking of using my old Spektrum DX3e with 3rd channel switch to change gears instead of a twin stick remote. The DX3E's switch has adjustable endpoints so I think it should work.

Share this post


Link to post
Share on other sites

Let us know if it works OK.  I use an old futaba 4 channel stick controller with a gate on the left stick to control throttle and gear change.  It's the only car I still use sticks on so I'd be interested to hear how well a 3 channel pistol grip controller works.

Share this post


Link to post
Share on other sites
On 10/21/2023 at 11:08 AM, davidwj95 said:

The wheels that come with the kit are far too small for my taste.  I fitted rc4wd 1.55 white 8 spokes to mine with 114mm tires.  I've also got some Injora wheels of the same design which are as good quality but cheaper. 

Screenshot_20231021_170424_Gallery.jpg

I have seen listings online for adding bruiser adapters to these to add aftermarket rims/tires. Did you need to do that? 

Share this post


Link to post
Share on other sites

High Lift runs 12mm hex all around so really any modern 1.9 or 2.2 wheel and tire combo will bolt up.  Then it’s only a matter of if the tires will clear the body.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...