Junfac Beadlock 2.2s

[TWINSET]

CLICK THIS

[backtomyroots]

Maybe your post will stir up more interest than mine:

No interest . . . . .

That Junfac is full of sweet surprises. On the topic of 2.2 items, Team Losi has some new 2.2 Rubber here:

Losi Rubber 2.2 Size !

[TWINSET]

I never saw that one fella, sorry

It's amazing it's so far down the topics in less than 24hrs!

I blame Mad Ax and his ballends - I'd have stayed away from Junfac otherwise

[Mad Ax]

Spotted them on Junfac's ebay site earlier - they seem very good VFM, especially given Junfac's reputation.

Depending on how the TXT crawler mods go over the coming months I may invest in a set to replace those oversize TXT wheels and actually get some proper traction for a change

[Mad Ax]

I blame Mad Ax and his ballends - I'd have stayed away from Junfac otherwise

you leave my ballends out of this

I will stop this train of conversation now, this is a family site

[backtomyroots]

I never saw that one fella, sorry

It's amazing it's so far down the topics in less than 24hrs!

I blame Mad Ax and his ballends - I'd have stayed away from Junfac otherwise

Stayed away . I check it daily for new releases ! I have a sneaking suspicion when I order my Junfac High Lift Chassis Kit those beadlocks are going to "jump" into the package as well !

[Shodog]

I'd have stayed away from Junfac otherwise

Why do you say that Andy?

[TWINSET]

Why do you say that Andy?

Low on funds fella

About to be lower too I fear

They gotta be some of the best looking beadlockers around, and at 42mm, they're pretty narrow too - when I narrow my Hobaos they end up around 42-43mm

They been doing their homework again!

[Shodog]

Low on funds fella

About to be lower too I fear

I hear ya, I wish they were not so expensive on some things. I bought a F350 chassis for my second High lift project http://www.tamiyaclub.com/showroom_model.a...56509&id=34 It's really nice but I don't know if it's $179 worth of nice.

I do agree with you on these wheels, it would be sweet if they were aluminum

[WILD WILLY]

Well i just had to read this thread as well ( i replied to the other one) and now they have all gone home early after a rather large sale of wheels and a chassis , i must resist the voices well at least the confirm button on ebay !

anyway i told the missis its your fault for pointing them out to me !

[TWINSET]

I hear ya, I wish they were not so expensive on some things

The true beauty over here is the prices are in Dollars, and with the rate at over $2 to the currently, happy pigs in poop spring to mind

The wheels I usually buy are 5.69 ($11.38) so a pair of tasty beadlockers for another $3.50 (less than two of Miss Artois' best ) doesn't take a lot of thinking about.

[Helen]

hope your not going to put your name on them or you'll have the beliefs at your door hahahaha, nice one twinset you made me laugh

[mobias]

They are ridiculously good value for money compared to the likes of RC4WD.com, but i suppose theirs are metal rather than plastic. I'm still holding off buying my much wanted F350 until I see what the score is with the fully specced out version that comes out next month. If my maths is correct then RC-Champ is asking less than 300 for it (not including postage) which is a bargain to good to miss I think. What with the Hotshot coming out too its going to be an expensive radio controlled month for me.

[monster_beetle]

I hear ya, I wish they were not so expensive on some things. I bought a F350 chassis for my second High lift project http://www.tamiyaclub.com/showroom_model.a...56509&id=34 It's really nice but I don't know if it's $179 worth of nice.

I do agree with you on these wheels, it would be sweet if they were aluminum

Actually way off topic, but Shodog, can you maybe look for me if the MFU fits in the junfac chassis?

[WILD WILLY]

less than two of Miss Artois' best

Cant beat being stella'd it makes for great (RC) driving and gives the kerbs meaning on my street !

And as far as the wheels being plastic i actually think thats better as i do tend to catch them on things and

catching a 80 set of alloys would make me very unhappy !

[TWINSET]

They arrived today

I left 'em at work

Bored now

[Shodog]

Actually way off topic, but Shodog, can you maybe look for me if the MFU fits in the junfac chassis?

I only Issue I see is the speaker box placement. I am going to have to think about how I want to mount it.

[BiggusDitchus]

I only Issue I see is the speaker box placement. I am going to have to think about how I want to mount it.

Apparantly Junfac are releasing an updated chassis for the highlift that will allow fitment of MFU (was listed for 6th July release date but no sign yet)