SteelRat 46 Posted May 10, 2009 Messed about with suspension on my TL01 after converting it to a "B". MB shocks are a gnats too long, and the stock TL01 ones are just a little too short. Another 5mm should just about do it! Share this post Link to post Share on other sites
markbt73 5316 Posted May 10, 2009 Finished "freshening" (I can't really call it restoring) my 58181 Stadium Thunder. I bought it for $80 a few months ago, ready-to-run but in pretty sorry shape. The body was a mass of cracks held together by clear packing tape, and it wore a set of nearly bald Pro-Line Mashers (how you wear down Mashers that badly, I have no idea...). It ran, but the run times were atrocious and the gearbox sounded like a washing machine full of pennies. So I tore it apart, cleaned it up, replaced the plastic bushings with a mix-and-match set of old bearings (a couple of them are a little "crunchy," but they're still way better than bushings), and replaced the badly worn Sport-Tuned motor with a fresh new 540. From the local hobby shop I scored Duratrax Evader tires for $7.99 a pair (got four rears because they didn't have fronts) and an Associated T3 body shell for $18. Combine that with a few decals from my stash, a few scraps of sign vinyl from work, and a splash of Pactra silver paint, and voila... a new lease on life for a grand total of $34. Now, time to go get it dirty. I got this one to bash with, after all... Share this post Link to post Share on other sites
Badboy 94 Posted May 13, 2009 I got bored yesterday, so I started building my Re-Grasshoppa! So, now what? I'm done... I want the Buggy Champ (RR) NOW!!!!!!!!!!! So, what have you done today? Badboy Share this post Link to post Share on other sites
Badboy 94 Posted May 17, 2009 I'm out every day to find more info on the Buggy Champ!!! So, What have you done today? Badboy Share this post Link to post Share on other sites
mb_c11 0 Posted May 17, 2009 Today (well, no, yesterday, actually) I installed the M-chassis undertray on my Honda S-800 (under construction, just waiting on the quick-release battery holder). I know the undertray is made from horrible plastic, so instead of painting it I covered it entirely in self-adhesive aluminium tape. It looks awesome. Share this post Link to post Share on other sites
Badboy 94 Posted May 17, 2009 Been out and running my cars around!!! Forgot to glue the tyres to the rims on my Monster Beetle Horrible noise when motor spinning and car not driving. My Rough Rider wasn't supposed to be driven... mostly new parts without glue on the screws = parts falling of all the time So, What have you done today? Badboy Share this post Link to post Share on other sites
SteelRat 46 Posted May 18, 2009 Well not today, yesterday Bought a Dremel and made some metal K parts out of sheet aluminium for my MB. Fitted some Yeah Racing shocks too. Hoping for a load more parts to be delivered today Wheels, tyres, GPM 75mm shocks for my TL01, a set of Carson 2WD wheels and tyres for the Falcon, and a Frog ebay win from last week. Going to be a busy few days I think Share this post Link to post Share on other sites
Cooltoys 129 Posted May 18, 2009 Took the Avante for some rounds... Fun fun.. Just had to be careful not to smash it to the wall... Share this post Link to post Share on other sites
Captain Hazzard 5 Posted May 18, 2009 Finished painting my Brat (badly!) and am now waiting in for my Slash to arrive. So excited! Share this post Link to post Share on other sites
Badboy 94 Posted May 18, 2009 This arrived today!!! Mmmmm.... SRB..... My SRB box collection so far: Unfortunaly only the tyre boxes are NIB rest is empty... :D So, What have you recieved today? Badboy Share this post Link to post Share on other sites
SteelRat 46 Posted May 18, 2009 the 75mm GPM shocks.. and that's it! Ah well, I'll just have to be patient I guess Share this post Link to post Share on other sites
pastimesteve 49 Posted May 18, 2009 Embarking on another project that has sat idle for a while. Inspired by several TC members, I'm going to create a baja beetle out of a Hornet I had sitting around out of parts I already have in my bin. It will get the CRP front suspension mod with oil dampers, centered steering with HiTec ball bearing mini servo, Sport Tuned motor, deejay's 3rd shock/spring mod, after-market wheels, a Parma shell for bashing and a Blitzer Beetle shell for display. Steve Share this post Link to post Share on other sites
Novastar 241 Posted May 19, 2009 I received my gold plated re-re Lunch Box today and have started building. I'll post a pic or two of this variant once its close to completion unless someone beats me to it Share this post Link to post Share on other sites
SteelRat 46 Posted May 19, 2009 Fit the 75mm shocks to the TL01 and the ground clearence is bang on. Have ordered some continously threaded rod for the steering servo so that I can adjust the toe on the front wheels. With the standard, fixed steering arms, the toe is all over the place. 6 12" lengths of 4-40 steel rod from Active Robots for £7. Bargain!. Share this post Link to post Share on other sites
Henk4Focus 0 Posted May 19, 2009 I asked a dumb question on the TC forum! That's about the most remotely close to Tamiya thing for the day so far. Will try to fix my F350's shifting problem again tonight though......... Cheers Henk Share this post Link to post Share on other sites
Cooltoys 129 Posted May 20, 2009 Installed dual wheels on my Blackfoot Share this post Link to post Share on other sites
Kokuzu 5 Posted May 20, 2009 I cleaned the Thorp diff I had recieved from the US more than 6 month ago and exchanged the standard chassis plate of my Sand Scorcher with the Titanium plate I got from a chap in this club. I received nicely shaped disk wheels made of alloy which will go under my Fiat 500 (first gen.) chassis from ABC Hobby. Share this post Link to post Share on other sites
Kokuzu 5 Posted May 20, 2009 I cleaned the Thorp diff I had recieved from the US more than 6 month ago and exchanged the standard chassis plate of my Sand Scorcher with the Titanium plate I got from a chap in this club. I received nicely shaped disk wheels made of alloy which will go under my Fiat 500 (first gen.) chassis from ABC Hobby. I ordered 4 DUNLOP Dragster tires for 1/10 scale. Now I need to find a project for them.... Share this post Link to post Share on other sites
knotty 0 Posted May 20, 2009 Fit the 75mm shocks to the TL01 and the ground clearence is bang on. Have ordered some continously threaded rod for the steering servo so that I can adjust the toe on the front wheels. With the standard, fixed steering arms, the toe is all over the place.6 12" lengths of 4-40 steel rod from Active Robots for £7. Bargain!. i stripped my recently aquired tl-01 down and re greased everything and cleaned it .do time tunnel or nobody do an adjustable steering arm ready made, or is there one from another kit that would do?and will the steel not be to heavy?i noticed on mine yesterday the steering is a pig to set up in a straight line with the trims on neutral so adjustable arms may be the way forward.And ive ordered some new wheels and a set of four XC chassis tyres and a new landy body.(i hope the mrs doesnt read this me wallet just had a right hammering :-( ) Share this post Link to post Share on other sites
SteelRat 46 Posted May 20, 2009 i stripped my recently aquired tl-01 down and re greased everything and cleaned it .do time tunnel or nobody do an adjustable steering arm ready made, or is there one from another kit that would do?and will the steel not be to heavy?i noticed on mine yesterday the steering is a pig to set up in a straight line with the trims on neutral so adjustable arms may be the way forward.And ive ordered some new wheels and a set of four XC chassis tyres and a new landy body.(i hope the mrs doesnt read this me wallet just had a right hammering :-( ) It's fairly thin and weighs hardly anything in its 12" form, so cut down, I can't imagine it'll weigh any more than the plastic servo arms that are on there already. Took the idea from another thread detailing MB hop ups (moving the steering servo on the MB to a more central position and using that threaded rod to give more even steering), so will use some of the other rod for modding my MB as well. Also took delivery of an original Frog fleabay win. Suprisingly good condition; original silver can motor, MSC, wheels and tyres. Will be ball racing it, stuffing one of my 27 turn motors, RV11 ESC, replacing the rear wheels with re-re brat jobbies and 915 tyres, and plonking one of my many beetle shells on there for a poor mans Scorcher project (well 70s style baja bug - I doubt the paint scheme and decals will be in the style of a scorcher replica). Will post pics when I get home Share this post Link to post Share on other sites
Blacque Jacque 4 Posted May 20, 2009 Since my last post, I've added the PS19 to my Stratos shell, then backed it with black, pulled the window masks & added PS31 for a fairly heavy smoke tint to the screen. I've also acquired a second M04 chassis to build in road trim (same as the rally M04XL, but lower to the ground & less suspension travel), plus some essential hop-ups for it; 53346 Quick release battery holder, Super Mini CVA's, adjustable upper arms & tie rods, a couple of sets of FXX wheels and a full set of ballraces. I've also picked up a set of American Racing Torq Thrust D wheels for my C3 Corvette, and they look just like this: I've managed to remove most of the horrible hand painted silver from my Eliminator shell using Astonish (a talc based abrasive cleaner) & I'm slowly polishing out the scratches left behind with toothpaste, many hours work with a Minicraft drill & felt polishing bobs (Don't laugh, it works really well ) And finally I bought a can of Toyota 8E3 Dark Blue Pearl to spray my Hilux with because that's the colour one of my 1:1's was. Share this post Link to post Share on other sites
SteelRat 46 Posted May 21, 2009 Finally got my delivery from Tower Hobbies (2 week wait $USD 60 shipping charge and a further £22 for customs) HPI Hemi Cuda body shell, 4x HPI Chrome 5 star wheels, 4x proline dirt hawg tyres all for the TL-01, along with 4x white 5 star HPI wheels and a pair of ribbed front tyres for the MB. I'm positively bubbling over with excitement. The Cuda shell I'm going to be painting in a metallic purple (Ps-18 from memory) and just use the standard decals that came with it. Both cars are going to look the dogs danglies. Can't wait to get the pics up in my showroom once it's all done! Share this post Link to post Share on other sites
knotty 0 Posted May 21, 2009 Got me defender shell from kamtech and have spent the morning marking it all out,ready for cutting.just need some info on tires now.or the tyres to arrive. what overall diameter are the toureg tyres are they 86 mm? from wheel rim to tread?oh and ive been to halfords for some primer and landy epson green metallic paint,not that ive got the idea from my 1:1 freelander or owt Share this post Link to post Share on other sites
Novastar 241 Posted May 22, 2009 Finally got the 24 carat Lunch Box together. It has a HD steering servo, ballraces, sport tuned motor and 101bk ESC. I'm just waiting on the receiver and my first wheel type transmitter so that should be interesting to get used to. Share this post Link to post Share on other sites
TA-Mark 195 Posted May 22, 2009 my first wheel type transmitter so that should be interesting to get used to. If you've ever driven slotcars the transition to a pistol grip is quite easy, it's just added steering. If you've come from 'toy' RCs with their 2 stick transmitters a pistol transmiter will take a bit more getting used to. Gold Lunchie look nice, very shiney, but that will change . Share this post Link to post Share on other sites