Scapelnz 204 Posted May 8, 2015 It's not cheating if you use a Tamiya chassis My RX7 is a hpi body on a TT01 Looks awesome! Ive decided to go with the HPI supra as I like the little extra details like the body kit etc just like your RX 1 Share this post Link to post Share on other sites
XV Pilot 1936 Posted May 8, 2015 I applied the body stickers to my daughters birthday gift. Pictures do NOT do justice on just how BRIGHT and PINK this body is! Also, these decals must be backed with super glue. I've never seen such strong adhesion in a decal before. I ruined the "Tamiya" on the wing and had to dip into my decal box for a replacement. Not exactly the same but close enough for government work I'd say. So many large decals. Getting them bubble free was a challenge but I think it turned out ok. Looks great! And very, very pink! I see you also departed slightly from the instructions with regards to the placement of the decals behind the side windows. I did that on mine too, and I think it looks better that way. What method/substance did you use to apply the decals? Window cleaner, soapy water or something else? I used soapy water and a hairdrier on mine. Share this post Link to post Share on other sites
Dojo Dave 889 Posted May 8, 2015 Bearings are in running noises gone I put the Wheeler torque tuned motor in my Frankenstein Madbull, sport tuned in my Wheeler, the Mad bull flies like a bat of H-e-l-l......don`t know if I'll be able to keep it for myself or if the kids will steel it. Magnet mounts on shopping list.... Share this post Link to post Share on other sites
Grastens 2795 Posted May 8, 2015 Bearings are in running noises gone Wheeler torque tuned motor in and it flies like a bat of H-e-l-l......done know if I'll be able to keep it for myself or if the kids will steel it. Magnet mounts on shopping list.... I know exactly what you mean! I was out today with Willy, too! It is surprisingly stable, I found. I also finished painting the bulk of the Willy figure that will be going into the Wheelie Rally - just need to sort out his pupils! Share this post Link to post Share on other sites
Dojo Dave 889 Posted May 8, 2015 I know exactly what you mean! I was out today with Willy, too! It is surprisingly stable, I found. I also finished painting the bulk of the Willy figure that will be going into the Wheelie Rally - just need to sort out his pupils! I find the more I build the more they want my stuff....I must be doing something right.. 1 Share this post Link to post Share on other sites
Grastens 2795 Posted May 8, 2015 Indeed! I mean, if I were a kid I would totally want a Honda City Turbo... Now that I am a young adult, I can have one! Despite this, I was surprisingly inconspicuous when running mine today at the school campus. Even the pretty girls (my age, I might add!) did not seem to notice the wheelies I pulled off every time they passed! 2 Share this post Link to post Share on other sites
Nobbi1977 1793 Posted May 8, 2015 Indeed! I mean, if I were a kid I would totally want a Honda City Turbo... Now that I am a young adult, I can have one! Despite this, I was surprisingly inconspicuous when running mine today at the school campus. Even the pretty girls (my age, I might add!) did not seem to notice the wheelies I pulled off every time they passed! I think Wheelers are like motorcycles, popping a wheely only impresses other blokes. To pull Birds you need a puppy or a tractor with a bear on it :-p 2 Share this post Link to post Share on other sites
Syholl 25 Posted May 8, 2015 Just took this for its first test run, I built it as my sons first RC, on his 6th birthday. I did all the hop-ups recommended on this forum: Steel bearings Foam tyre inserts Oil shocks 5th shock mod Alloy body mounts Just got to put some lights on it now 4 Share this post Link to post Share on other sites
Effigy3 1267 Posted May 8, 2015 Just took this for its first test run, I built it as my sons first RC, on his 6th birthday. I did all the hop-ups recommended on this forum: Steel bearings Foam tyre inserts Oil shocks 5th shock mod Alloy body mounts Just got to put some lights on it now That reminds me of the A-Team van! I love it when a plan comes together. Share this post Link to post Share on other sites
bromvw 744 Posted May 8, 2015 lol every guy knows that you need to do hand break turns to impress the ladys . Share this post Link to post Share on other sites
Wez-li 1790 Posted May 8, 2015 Thanks for the comments on the FDS RX7, not sure you'd be so complimentary on the other body it shares with the TT01... Ok, so it's not so bad from behind, R34 Skyline, promising... but then... Oh... Not even sure how it got like this, but my son can use it for now till he's ready for the RX... in about 10 years! I don't even think I'm ready for the RX7. Share this post Link to post Share on other sites
BBB@BKK 9 Posted May 8, 2015 Finished upgrading and extending from M to L my m03. Share this post Link to post Share on other sites
ChrisRx718 4470 Posted May 8, 2015 I cut these out, doing the wheel arches with a dremel tool. You simply couldn't achieve the same with a pair of curved scissors, can't believe I haven't used it for this purpose before. Although there is one down side - the dust this creates. I think I have enough to fill a hoover bag - just with what I'm wearing! 3 Share this post Link to post Share on other sites
Effigy3 1267 Posted May 8, 2015 Looks great! And very, very pink! I see you also departed slightly from the instructions with regards to the placement of the decals behind the side windows. I did that on mine too, and I think it looks better that way. What method/substance did you use to apply the decals? Window cleaner, soapy water or something else? I used soapy water and a hairdrier on mine. Yeah, that box art decal layout behind the side window is overly busy for my tastes. I do like the original New Scorchers faux-air vents but those stickers didn't look good at all on the pink body. I pulled off the one I sort of test-applied. Typically I use soapy water that I mist on with an old hair detangler spay bottle. It's mist is so fine. It's like pixie breath. I've not seen a spayer bottle that is it's equal. On this body though I did the "ol' peal back a corner of the paper - align the decal - affix the pealed back section - smooth on the decal whilst pulling the remaining paper" method. I think I shied away from misting it because of all the body contours. I was afraid the decals wouldn't stick well enough if misted. Maybe yes, maybe no but in the end I think it turned out pretty ok. Well, that silver Tamiya on the wing does bug me a bit. I so have Tamiya OCD. Share this post Link to post Share on other sites
bjorklo 1620 Posted May 8, 2015 Sold my Boomerang :-( Share this post Link to post Share on other sites
NWarty 1325 Posted May 8, 2015 Sold my Boomerang :-( Ouch. Sorry to hear that 1 Share this post Link to post Share on other sites
Wez-li 1790 Posted May 8, 2015 I cut these out, doing the wheel arches with a dremel tool. You simply couldn't achieve the same with a pair of curved scissors, can't believe I haven't used it for this purpose before. Although there is one down side - the dust this creates. I think I have enough to fill a hoover bag - just with what I'm wearing! Brilliant aren't they? I was late to the dremel party too as I only got mine for Xmas. Got about a thousand attachments but only use about 3 Share this post Link to post Share on other sites
Gravel Wolf 6 Posted May 9, 2015 Spray painted a grasshopper body and a fighter RX body in matt black Result: I don't know why Tamiya never released the RX in black in the first place, it looks like it was made to be that colour to me. They need to release a "black edition" - maybe with gold plated rims too 2 Share this post Link to post Share on other sites
Dojo Dave 889 Posted May 9, 2015 I impatiently checked the mail box over and over......nothing..... Made the mistake of asking my five year old do you like these wheels...... Or these wheels....... And of course he picked the ones I'll have to buy. The top picture.... Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted May 10, 2015 I finished a Unimog shell for my CR-01 today... 12 Share this post Link to post Share on other sites
mongoose1983 3335 Posted May 10, 2015 I was wondering what ever happened with your Unimog build, Paul. That Mercedes look fantastic, and I presume it performs accordingly. Awesome. Share this post Link to post Share on other sites
ChrisRx718 4470 Posted May 10, 2015 That Mercedes looks heavy-duty. I like it. Today I'm exhausted having finished my daughters play house in time for summer. I was going to do some RC masking and painting but my fingers feel like jelly - so I'm just going to have a few beers and sit and play some video games haha! Share this post Link to post Share on other sites
Syholl 25 Posted May 10, 2015 Just bought a chrome midnight pumpkin, and a whole load of upgrades for it, after spending a couple of hours at the park watching my son thrash his lunchbox round the box track. Now I can join in the fun....!! 3 Share this post Link to post Share on other sites
z00ter 392 Posted May 10, 2015 took the Avante bs out for some bashing, couple flips/crashes but nothing broken (apart from a cracked wing / scratched body) so mucho funz. I think its doing very well as a basher so far, if this were my DF03 I think there would have been breakages. Share this post Link to post Share on other sites
appleby20 193 Posted May 10, 2015 Another one from the wish list. Unfortunately I don't have the colors to paint the driver. To compensate I started preparing the AUDI R8 shell. Share this post Link to post Share on other sites