JeffSpicoli 1363 Posted April 10, 2018 Put the wheels to the ground for the first time since my Futaba Magnum Sport came yesterday Still a bunch of pain in the neck painting to finish on the body. Found out how slippery our floors are at work 3 Share this post Link to post Share on other sites
bjorklo 1620 Posted April 10, 2018 Bought myself an old Top Force with allot of extra used stuff, including a green chassis 6 Share this post Link to post Share on other sites
Phil5556 136 Posted April 10, 2018 Non tamiya (and technically I did it yesterday) but made a new rudder for the hydrofoil and fitted a new prop shaft, this time in line with the centre of the hull. Hopefully it will be controllable like this. Share this post Link to post Share on other sites
Mokei Kagaku 2706 Posted April 10, 2018 8 minutes ago, Phil5556 said: Non tamiya (and technically I did it yesterday) but made a new rudder for the hydrofoil and fitted a new prop shaft, this time in line with the centre of the hull. Hopefully it will be controllable like this. Is it the Gunze Sangyo PT-50 Supramar hydrofoil? Share this post Link to post Share on other sites
JeffSpicoli 1363 Posted April 10, 2018 I did the cable management. Waiting and waiting for MCI decals to show up. More paint work to do. 😩 2 Share this post Link to post Share on other sites
ThunderDragonCy 7881 Posted April 10, 2018 Finally started on my new TBG Thunder Dragon shell. Must be one of the easiest shells to trim with all the straight lines but it still took ages! Made a start on cutting the decals. Super fiddly! Taken a punt on MCI under the shell decals. We will see. 2 Share this post Link to post Share on other sites
Bromley 681 Posted April 10, 2018 Painted my Lancia Delta shell white. Now a million stickers need careful cutting out and applying. Just waiting on some bearings for the tt-02 chassis, then the rest of the build will start! Share this post Link to post Share on other sites
Phil5556 136 Posted April 10, 2018 4 hours ago, Mokei Kagaku said: Is it the Gunze Sangyo PT-50 Supramar hydrofoil? Nope, it's a home made in my garage from plans in a model boat magazine Made it years ago, maybe 25 years ago (?), and have recently dug it out from my mum's house. Been having a play to try and get it running a bit better. I posted about it a few pages ago in this thread. 1 Share this post Link to post Share on other sites
mman2005 443 Posted April 11, 2018 9 hours ago, ThunderDragonCy said: Finally started on my new TBG Thunder Dragon shell. Must be one of the easiest shells to trim with all the straight lines but it still took ages! Made a start on cutting the decals. Super fiddly! Taken a punt on MCI under the shell decals. We will see. About time Cy. What have you decided in the colour scheme? Decals under sounds interesting. Intrigued to know how that turns out. Share this post Link to post Share on other sites
ThunderDragonCy 7881 Posted April 11, 2018 40 minutes ago, mman2005 said: About time Cy. What have you decided in the colour scheme? Decals under sounds interesting. Intrigued to know how that turns out. Yeah, decided to commit to the LOUD and got neon orange. Its my favourite colour. After thinking on it last night and looking at the box art under shell decals i chickened out on those. There is quite a lot of red in them which could look rubbish with the orange and it will write off the whole shell if they look bad. Ordered some conventional decals from MCI just now with some custom colours which should compliment the orange better. If you need a full set of box art decals for under the shell, let me know. I'll be selling this set now. 1 Share this post Link to post Share on other sites
NWarty 1325 Posted April 11, 2018 Won an Airtronics MX-3s synthesized transmitter and equipment for $35 USD shipped. Has servo, rx and other kit along with the box.I loved my original MX-3. Share this post Link to post Share on other sites
ChrisRx718 4470 Posted April 11, 2018 I started sorting through my RC gear. I opened yet another box. It seems I have a wheelie big problem: 1 4 Share this post Link to post Share on other sites
mman2005 443 Posted April 11, 2018 11 minutes ago, ChrisRx718 said: I started sorting through my RC gear. I opened yet another box. It seems I have a wheelie big problem: Looks like you're having quite the clear out and probably due do you happen to know what tyres there are on the white star dish wheels? Share this post Link to post Share on other sites
78Triumph 2610 Posted April 11, 2018 Installed a hi lift jack on the tailgate of my Unimog and then drove it around for a bit. Untitled by Joe, on Flickr Untitled by Joe, on Flickr I opened up the Boomerang kit I got, stared at the contents, and decided it looked too nice to do anything with yet. The way Tamiya packages their kits is almost art in and of itself. Untitled by Joe, on Flickr 6 1 Share this post Link to post Share on other sites
Bromley 681 Posted April 11, 2018 I hate it that I can never get the blooming stuff back in the way Tamiya packed it! It's witchcraft. 3 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted April 12, 2018 Cancelled a backorder with Modelsport for a HPI DeTomasa Pantera Bodyshell and a Core RC 2s lipo... that’s because I’ve overspent on MST wheels whilst waiting! I also test squirted a can of Plastidip on a cardboard box... with a view to waterproofing some receivers in my runner cars.... I chose a bright yellow colour which should liven up a black chassis! I need to decide how to best coat them and then mount them back into the cars..... will servo tape still hold a plastdipped receiver onto a chassis? 1 2 Share this post Link to post Share on other sites
NWarty 1325 Posted April 12, 2018 Oh lord, now I have a fascination with Yokomo YZ-10's. Specifically early to mid 90's YZ-10's. Even the Tomy Intruder. I absolutely love the look of them. They scream "rc buggy" to me. Low, squat, 4wd pin-spikey tires, aggressive looking. I want a bright color scheme and Oakley decals plastering it, graphite chassis, pink dish wheels. Quintessential 1993'ish buggy. It's time for a more "modern" buggy. I despise anything cab-forward though. This starts after I finish my Grasshopper II Super Duper G build. Need a project/basketcase car so I'm open to suggestions to see what you have. 2 Share this post Link to post Share on other sites
Jason1145 3986 Posted April 12, 2018 Finished my HPI Porsche bodyshell sat on top of my TT01E Roller (thanks @Badcrumble for selling me this ages ago), painted with Core RC Spearmint Green paint and finished off with HPI 6mm offset front wheels and 9mm offset HPI rears. 13 Share this post Link to post Share on other sites
Rb4276 803 Posted April 12, 2018 Finished my agrios today. Not happy about the paint color. It is supposed to be tamiya metallic black, looks like gun metal or charcoal. I am going to get a new body in a few weeks and paint it a much brighter color. Truck runs nice, probably will remove the tactic high torque metal gear servo for something stronger. The servo definitely doesnt cut it. 4 Share this post Link to post Share on other sites
ThunderDragonCy 7881 Posted April 12, 2018 48 minutes ago, NWarty said: Oh lord, now I have a fascination with Yokomo YZ-10's. Specifically early to mid 90's YZ-10's. Even the Tomy Intruder. I absolutely love the look of them. They scream "rc buggy" to me. Low, squat, 4wd pin-spikey tires, aggressive looking. I want a bright color scheme and Oakley decals plastering it, graphite chassis, pink dish wheels. Quintessential 1993'ish buggy. It's time for a more "modern" buggy. I despise anything cab-forward though. This starts after I finish my Grasshopper II Super Duper G build. Need a project/basketcase car so I'm open to suggestions to see what you have. Put a GH2/Mad Bull body on a DT03. Obvs! 3 Share this post Link to post Share on other sites
Badcrumble 4204 Posted April 12, 2018 2 hours ago, Jason1145 said:  Lookin' good! I like those wheels too. Glad the chassis has been put to good use! 1 Share this post Link to post Share on other sites
JeffSpicoli 1363 Posted April 13, 2018 mini rant: UGH, trying to order all my supplies from ONE hobby shop and it's near impossible! nobody has the 4 oz mask and the paint i need. they have one or the other. ok today sucked going to bed. Share this post Link to post Share on other sites
Blista 1519 Posted April 13, 2018 Got the last of my WRX decals on last night. 9 Share this post Link to post Share on other sites
mman2005 443 Posted April 13, 2018 3 hours ago, Blista said: Got the last of my WRX decals on last night. WOW!!! 1 Share this post Link to post Share on other sites
NWarty 1325 Posted April 13, 2018 Shot TS-26 pure white last night on the Grasshopper II Super Duper G. Masking today to shoot TS-34 Camel Yellow this evening. Also replaced two repro decals on the Shelfer body and finally have it back to 100% OEM original ("I'm Hopping Mad" decal and top blue roof stripe). Ordered a new GH II chassis, driver parts tree w/fog lights, and Hotshot window netting this morning. I've got PintoPower's front bumper on my watch list. Brushless motor and ESC will be delivered today. 12mm hex adapters are still enroute. MCI Decals still en route. Sorry for the crummy photo quality. Tapatalk tends to butcher the photo resolution 2 Share this post Link to post Share on other sites