lsear2905 1279 Posted November 16, 2019 31 minutes ago, Juggular said: I like that Chrome Yellow! My Midnight Pumpkin's 2nd body (lunchie) isn't painted yet. Please don't mind if mine turns up with TS47! Are those Traxxas shocks, @lsear2905? Yes - they're all Traxxas shocks - the car seemed to handle nicely with the stock silver can using these. It'll be going up to a Traxxas Titan 12T very soon though! 2 Share this post Link to post Share on other sites
Re-Bugged 10156 Posted November 16, 2019 Thought I’d try my Brat body on the Black edition Monster Beetle chassis. I rather like it myself. 8 1 Share this post Link to post Share on other sites
mtbkym01 4008 Posted November 16, 2019 1 minute ago, Re-Bugged said: Thought I’d try my Brat body on the Black edition Monster Beetle chassis. I rather like it myself. What about a pic of the MB body on the Brat chassis? 2 Share this post Link to post Share on other sites
Re-Bugged 10156 Posted November 16, 2019 1 minute ago, mtbkym01 said: What about a pic of the MB body on the Brat chassis? Not terribly exciting in that department yet as it’s still just a raw black plastic shell unfortunately at the moment 😕 1 Share this post Link to post Share on other sites
mtbkym01 4008 Posted November 16, 2019 1 minute ago, Re-Bugged said: Not terribly exciting in that department yet as it’s still just a raw black plastic shell unfortunately at the moment 😕 Fair enough then mate 👍 Share this post Link to post Share on other sites
Re-Bugged 10156 Posted November 16, 2019 I have got this one though @mtbkym01, http:// http:// 😉 5 3 Share this post Link to post Share on other sites
moffman 5752 Posted November 16, 2019 9 hours ago, Re-Bugged said: Thought I’d try my Brat body on the Black edition Monster Beetle chassis. I rather like it myself. That's a proper good looking truck looks as though it's just meant to be👌 1 1 Share this post Link to post Share on other sites
moffman 5752 Posted November 16, 2019 13 hours ago, lsear2905 said: Yes - they're all Traxxas shocks - the car seemed to handle nicely with the stock silver can using these. It'll be going up to a Traxxas Titan 12T very soon though! Chrome yellow is the colour of the lunchbox box art if you put the paint lid up to it it's a absolute perfect match I could never understand why tamiya tell you to spray it basic yellow? 1 Share this post Link to post Share on other sites
moffman 5752 Posted November 16, 2019 Finished off my topforce (vintage servos)purely as a shelf queen I've put a brushless combo in for the moment until I find a suitable brushed motor don't know which one until I see it! 10 Share this post Link to post Share on other sites
Rb4276 803 Posted November 16, 2019 Added hot racing aluminum steering knuckles to my txt 2. Had to add tamiya spacers for the heavy duty rod to clear the servo 1 Share this post Link to post Share on other sites
Sammo 479 Posted November 16, 2019 I haven’t done anything R/C related for quite a while. Life has got in the way a bit and hobbies have had to go on the back burner. I’ve even sold off a couple of “future projects” because realistically I won’t get around to doing them all However, during the week I managed to get myself a sickness bug, which meant a couple of days off work. Once the sickness had stopped I decided it was R/C time (or should that be Tamiya time?). I dragged out one of my “future projects” and gave it a dust off For those that don’t know. It’s a TA-01 with an HPI chassis upgrade. Rare as a rare thing apparently Once it was cleaned up I set about cutting out my new body from L&L Models ready to go on. Then it was the nerve wracking part of making the post holes and getting them right! Luckily I managed it! That’s about as far as I got. The cut edges still need smoothing down, it needs masking and painting obviously and I need to rebuild the shocks for the chassis. I love it though 6 Share this post Link to post Share on other sites
Oneball1971 127 Posted November 16, 2019 5 hours ago, moffman said: Finished off my topforce (vintage servos)purely as a shelf queen I've put a brushless combo in for the moment until I find a suitable brushed motor don't know which one until I see it! Where did you get the Evo Decals from? Share this post Link to post Share on other sites
moffman 5752 Posted November 16, 2019 42 minutes ago, Oneball1971 said: Where did you get the Evo Decals from? MCI racing (next best thing to the original) Share this post Link to post Share on other sites
Nicadraus 6201 Posted November 17, 2019 11 hours ago, moffman said: Finished off my topforce (vintage servos)purely as a shelf queen I've put a brushless combo in for the moment until I find a suitable brushed motor don't know which one until I see it! Find a Dynatech 01R. 1 Share this post Link to post Share on other sites
Jonathon Gillham 4607 Posted November 17, 2019 Went racing today, 10th scale on an 8th track. The track has just been remade for the Counties Cup which is a 3 day event woth about 100 buggies entered. The normal club day was scheduled for today so it was a shakedown for the track. It was a fun day put but I think I need a new ESC for my 4wd buggy as after a heavy landing I had steering but no throttle. I run stock class and the racing is so close, often the only time you pass or get passed is because of a mistake. Now I'm tossing up whether its worth the extra $ for an ESC with 0.00018ohm instead of 0.0003 ohms resistance...it helps I've had a couple of beers so I can pretend that will make a difference. I also ran my Ultima RB6.6 with a slipper for the first time and it was better than the eliminator but is still not my favourite. Its on notice... My son did well though, at the start of the day the track was new to everyone and he was being marshalled less than many of the adults. 2 Share this post Link to post Share on other sites
Re-Bugged 10156 Posted November 17, 2019 Cracking looking Top Force @moffman . @Jonathon Gillham can't be far off finishing his to I'm sure 2 Share this post Link to post Share on other sites
Jonathon Gillham 4607 Posted November 17, 2019 4 minutes ago, Re-Bugged said: Cracking looking Top Force @moffman . @Jonathon Gillham can't be far off finishing his to I'm sure I haven't started mine - not allowed until the 15th December (a family xmas a bit early since the other one is 8 hour drive away) It was part of the deal when I saw them available and ambushed my wife 2 Share this post Link to post Share on other sites
Re-Bugged 10156 Posted November 17, 2019 2 minutes ago, Jonathon Gillham said: I haven't started mine - not allowed until the 15th December (a family xmas a bit early since the other one is 8 hour drive away) It was part of the deal when I saw them available and ambushed my wife Small price to pay for endless future happiness having to wait til the 15th Dec. Its all about keeping the peace too . Talking of ambushes, in asking sincerely what my wife would like for Christmas recently, after some time the conversation came around to what I'd like, 'Funny you should ask' I said. 'It just so happens Wild Ones seem to be filling shelves again after stocks being depleted from the last run that are in my price range and it was a toss up between the Blackfoot or Wild One last year' So before you could say Merry Christmas a Wild One was in the cart & ordered. I did use a Voucher I had left over from Fathers Day to that helped a bit. I'll have to wait for Christmas for it though. Now if I could just remember what is was the wife asked for ?? 2 3 Share this post Link to post Share on other sites
moffman 5752 Posted November 17, 2019 3 hours ago, Nicadraus said: Find a Dynatech 01R. Yep that's the one on the top of the list! I've seen a few for sale but the prices people are paying for them are a bit ridiculous although they were a bit expensive originally? I'm in no hurry! 1 Share this post Link to post Share on other sites
Bromley 681 Posted November 17, 2019 Finished cutting out my new body for my TT02 stock touring racer. 5 Share this post Link to post Share on other sites
geniusanthony 361 Posted November 17, 2019 On 11/16/2019 at 9:17 AM, Re-Bugged said: Thought I’d try my Brat body on the Black edition Monster Beetle chassis. I rather like it myself. The gold wheels tie into the decal colors quite well. 1 Share this post Link to post Share on other sites
nellyle 382 Posted November 17, 2019 Not perfect (why can't Tamiya provide window masks!) but I've pretty much finished my Zahhak. Just need to tidy up the wiring a bit. Not the most popular model, but I don't think it looks too bad if you ditch the box art stickers! It has a Schumacher wing as I've got a few laying around and I hate cutting out wings! 12 Share this post Link to post Share on other sites
nowinaminute 2815 Posted November 17, 2019 I started stripping down my recently acquired Hilux Monster Racer so I can clean it all and rebuild it. Spent 10 minutes searching for an E clip that pinged off then I looked in the mirror.... 1 12 Share this post Link to post Share on other sites
Rb4276 803 Posted November 17, 2019 38 minutes ago, nellyle said: Not perfect (why can't Tamiya provide window masks!) but I've pretty much finished my Zahhak. Just need to tidy up the wiring a bit. Not the most popular model, but I don't think it looks too bad if you ditch the box art stickers! It has a Schumacher wing as I've got a few laying around and I hate cutting out wings! 38 minutes ago, nellyle said: Not perfect (why can't Tamiya provide window masks!) but I've pretty much finished my Zahhak. Just need to tidy up the wiring a bit. Not the most popular model, but I don't think it looks too bad if you ditch the box art stickers! It has a Schumacher wing as I've got a few laying around and I hate cutting out wings! I bought one 4 years ago from tamiyausa and it blows away all the non trf tamiyas. It was the best $110 spent on any rc stuff. I see in the past year or so now everyone loves them lol. I always liked the body minus the tamiya box art Share this post Link to post Share on other sites
78Triumph 2610 Posted November 17, 2019 I took my Defender out for a trail ride. Untitled by Joe, on Flickr Untitled by Joe, on Flickr 9 Share this post Link to post Share on other sites