CoolHands 816 Posted January 19, 2020 My esc somehow blew up / emitted smoke so while I’m waiting for a new one I can’t race so I’ve taken front and rear apart and am changing settings to a different setup (this is a team associated b6.1) . Use d my hudy setup station to set the front camber. Can’t use it for toe as this is a touring car set and off-road cars are wider so it needs a different component. 2 Share this post Link to post Share on other sites
Grumpy pants 4485 Posted January 20, 2020 Ok so I have put a self imposed ban on eBay, specifically Tamiya searching. I end up buying models I have no hope of ever getting round to doing anything useful with and then I have the time loss of selling them on, instead of spending that time doing something useful with a model I already have. It’s gonna be tough, tantrums, tears...but it has to be done 😂 2 4 Share this post Link to post Share on other sites
jonboy1 2943 Posted January 20, 2020 1 hour ago, Grumpy pants said: Ok so I have put a self imposed ban on eBay, specifically Tamiya searching. I end up buying models I have no hope of ever getting round to doing anything useful with and then I have the time loss of selling them on, instead of spending that time doing something useful with a model I already have. It’s gonna be tough, tantrums, tears...but it has to be done 😂 I give it a week.... 7 Share this post Link to post Share on other sites
a.w.k. 665 Posted January 20, 2020 I reassembled the Marui Shogun after cleaning and refurbishing. 13 Share this post Link to post Share on other sites
Hobgoblin 1059 Posted January 20, 2020 I printed and installed my falcon front arms. Tweaked the tolerances a bit and it's a pretty spot on fit! 9 Share this post Link to post Share on other sites
J@mes 2326 Posted January 20, 2020 Stripped and cleaned the (working bits of) Heavy Dump Truck, beach runner that it is. Fresh grease to the clean gearbox, somehow some sand had got in, mmm crunchy. Rebuilt the shocks - love these CC01 dampers, hot glued the lights in place that kept falling out, tidied up the wiring & electrics generally. doing this refreshed my memory of what hop ups are on it & could be useful for a G6-01 build. There’s a 20T steel pinion on its way as the alu ones worn out & binned. 2 Share this post Link to post Share on other sites
Biz73 603 Posted January 20, 2020 Sold my Sand Scorcher today. It's all boxed up and ready to ship out tomorrow. Worst part is that I can't spend the money on RC stuff 1 3 Share this post Link to post Share on other sites
sleb22 25 Posted January 21, 2020 Finished my Rally Beetle. 9 Share this post Link to post Share on other sites
KalEl63 695 Posted January 21, 2020 Started my CR-01 Build....man Bag A has a lot in it I think its going smooth but I guess I'll find pout once its done and something doesn't work 7 Share this post Link to post Share on other sites
Badcrumble 4203 Posted January 21, 2020 1 hour ago, KalEl63 said: Started my CR-01 Build....man Bag A has a lot in it I think its going smooth but I guess I'll find pout once its done and something doesn't work That looks like fun! I’ll have to dig out my Rock Socker to build this summer... 1 Share this post Link to post Share on other sites
Butler 338 Posted January 21, 2020 On 1/19/2020 at 9:21 PM, CoolHands said: My esc somehow blew up / emitted smoke so while I’m waiting for a new one I can’t race so I’ve taken front and rear apart and am changing settings to a different setup (this is a team associated b6.1) . Use d my hudy setup station to set the front camber. Can’t use it for toe as this is a touring car set and off-road cars are wider so it needs a different component. Where do you race? Share this post Link to post Share on other sites
mtbkym01 4008 Posted January 21, 2020 2 hours ago, KalEl63 said: Started my CR-01 Build....man Bag A has a lot in it I think its going smooth but I guess I'll find pout once its done and something doesn't work I’m digging the black theme on this chassis, top job mate 3 Share this post Link to post Share on other sites
78Triumph 2610 Posted January 21, 2020 I finished installing the electronics in my TRX4 Sport kit build. This was the most enjoyable kit to assemble. Fit and finish is outstanding, instruction book is done equally well. So many nice little touches Traxxas does for it's assembly kits, like having loctite pre-applied to the applicable screws for instance. That's a nice touch. The links being pre-assembled was nice as well. Untitled by Joe, on Flickr Untitled by Joe, on Flickr Untitled by Joe, on Flickr 6 Share this post Link to post Share on other sites
Novamadcars 230 Posted January 21, 2020 I’ve finished assembling my ta01 after a complete strip down and clean. I have two problems one I have no grease and two I’ve lost a step screw 😪 4 Share this post Link to post Share on other sites
Novamadcars 230 Posted January 21, 2020 Just finished putting these back together after a good scrub. 5 Share this post Link to post Share on other sites
MadInventor 3884 Posted January 21, 2020 Ordered a new shell and sticker set for my re-re hotshot. Going to see what it looks like in Avante metallic blue 4 Share this post Link to post Share on other sites
CoolHands 816 Posted January 21, 2020 13 hours ago, Butler said: Where do you race? Dms in Aldenham school indoor carpet most Wednesdays and about 1 a month Saturday series (This is not me): Share this post Link to post Share on other sites
78Triumph 2610 Posted January 21, 2020 Took my TRX-4 out for it's maiden voyage. I love this truck! It's a blast to drive and super fun to build! Untitled by Joe, on Flickr Untitled by Joe, on Flickr Untitled by Joe, on Flickr Untitled by Joe, on Flickr Untitled by Joe, on Flickr Untitled by Joe, on Flickr 9 Share this post Link to post Share on other sites
Blista 1519 Posted January 22, 2020 2 hours ago, 78Triumph said: Took my TRX-4 out for it's maiden voyage. I love this truck! It's a blast to drive and super fun to build! Looks great! I've been thinking about getting one of these. It's a bit of a step up in price compared to Tamiya but it's so tempting. 2 Share this post Link to post Share on other sites
Re-Bugged 10143 Posted January 22, 2020 9 hours ago, MadInventor said: Ordered a new shell and sticker set for my re-re hotshot. Going to see what it looks like in Avante metallic blue I think @Saito2 has a Hot Shot in Metallic Blue? Looks fantastic with the white wheels 👍🏻. Wouldn’t mind one in blue myself 😀 Share this post Link to post Share on other sites
Re-Bugged 10143 Posted January 22, 2020 Cut the grass as we have at last had some rain, nice to have a bit of greenery again after looking at a dust bowl out the back for what seems like an eternity. Got the electrics in the Wild One at took it for a test run around the garden, (hence why the grass was really cut in the first place 😉) And it runs very nicely 👍🏻 I then had a LiPo that needed reducing back down to Storage charge so the Blackfoot came out for a spin In the sunshine before the Mozzies come out to say “Hello”. The Diff is still going strong in this one. It may be a Tamiya influence but I seem to have developed a taste for Japanese beer as well 🍺 Nice drop of stuff. 12 Share this post Link to post Share on other sites
Badcrumble 4203 Posted January 22, 2020 I needed a couple of pinions and a servo horn. So I ordered them plus a tx / rx / servo combo, another servo, a scale winch rope, a pair of rally block tyres and two pairs of dampers. 2 Share this post Link to post Share on other sites
Grumpy pants 4485 Posted January 22, 2020 4 minutes ago, Re-Bugged said: Cut the grass as we have at last had some rain, nice to have a bit of greenery again after looking at a dust bowl out the back for what seems like an eternity. Got the electrics in the Wild One at took it for a test run around the garden, (hence why the grass was really cut in the first place 😉) And it runs very nicely 👍🏻 I then had a LiPo that needed reducing back down to Storage charge so the Blackfoot came out for a spin In the sunshine before the Mozzies come out to say “Hello”. The Diff is still going strong in this one. It may be a Tamiya influence but I seem to have developed a taste for Japanese beer as well 🍺 Nice drop of stuff. Quality Tamiya phots and a that’s a great beer as well. A preferred choice at one of our local pubs 👌 1 Share this post Link to post Share on other sites
Re-Bugged 10143 Posted January 22, 2020 4 minutes ago, Grumpy pants said: Quality Tamiya phots and a that’s a great beer as well. A preferred choice at one of our local pubs 👌 I only discovered Asahi recently at a licensed Burger Joint of all places. The black label is even nicer, but a bit early in the afternoon for that! Sapporo is also very nice 👍🏻 2 Share this post Link to post Share on other sites
yogi-bear 2321 Posted January 22, 2020 got the control panel sorted on the vac former, all switches are working. Although the solenoid valve to the pump is a little restrictive, so a better one is on order. Also managed to get a digital read of the z-axis on the mill installed and the lathe re-assembled. 3 Share this post Link to post Share on other sites