Jump to content
Badboy

So, What Have You Done Today?

Does the club need more member blogs...  

361 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

One small consolation in these crazy times - and pretty good therapy - is making progress on the long list of projects.

Today I finished my F101 chassis, in Benetton B190 (in 1990 spec) to go with my B190B (early 1991 spec). 

Love the old F1's!

https://www.tamiyaclub.com/showroom_model.asp?cid=135037&id=29570

https://www.tamiyaclub.com/showroom_model.asp?cid=131505&id=29570

IMG_9128.thumb.JPG.577a25cf0abb8962b39dfe6a3575a363.JPG

IMG_9133.thumb.JPG.a99cff6f8fab9bd1ba13989fa937b7da.JPG

 

  • Like 14

Share this post


Link to post
Share on other sites

F1 cars look fantastic @rjg1973

I've always had a hankering for an F201, BMW or Ferrari, I'm not fussy! They were really unpopular at the time (in the UK, at least) and as such they're incredibly rare now :(

Share this post


Link to post
Share on other sites
2 hours ago, ChrisRx718 said:

F1 cars look fantastic @rjg1973

I've always had a hankering for an F201, BMW or Ferrari, I'm not fussy! They were really unpopular at the time (in the UK, at least) and as such they're incredibly rare now :(

Cheers Chris!

I started with a Frog, but something about the F1s hooked me. Check my showroom and you’ll see how badly!!

Share this post


Link to post
Share on other sites
5 hours ago, rjg1973 said:

One small consolation in these crazy times - and pretty good therapy - is making progress on the long list of projects.

Today I finished my F101 chassis, in Benetton B190 (in 1990 spec) to go with my B190B (early 1991 spec). 

Love the old F1's!

https://www.tamiyaclub.com/showroom_model.asp?cid=135037&id=29570

https://www.tamiyaclub.com/showroom_model.asp?cid=131505&id=29570

IMG_9128.thumb.JPG.577a25cf0abb8962b39dfe6a3575a363.JPG

IMG_9133.thumb.JPG.a99cff6f8fab9bd1ba13989fa937b7da.JPG

 

Those are AWESOME! Very well done. I could just sit back with a cup of coffee and stare at those for a bit.

  • Like 1

Share this post


Link to post
Share on other sites

Today's ration of RC involved swapping the TEU-101BK in my brushed DT-02 for a RV12 in preparation for the motor upgrade that will form tomorrow's ration.

  • Like 1

Share this post


Link to post
Share on other sites

Gave the lawn its first cut of spring, then ran five packs through the Mad Bull, chasing the kids round the garden in the sunshine.

  • Like 2

Share this post


Link to post
Share on other sites

I got a driver for Dancing Rider. 

I want to use these girly eyes. 

(I guess it could also be a guy with really gorgeous lashes...)

F4dGSlE.jpg

But the driver's face is a bit square.

tHlJq4S.jpg

And the bigger problem is that certain anatomical features are lacking. (Concaved, even) 

5FFdjwl.jpg

so... where am I going with this?  

...

..

.

I had added shoulder pads to a Tamiya driver before. 

KRO01jq.jpg

Why not for other parts too? 

...

..

TDeK1c4.jpg

I'm not exactly happy with the chin surgery (and lower lip).  I'll keep working on them.  

As for the... er... front bumpers... Mrs. thinks they are too big. I agree with her because I only wanted to say, "it's no boy." (in a family-friendly manner, of course)  But it's very hard to take off (no pun intended). So they'll stay. 

With the putty color so dark, I need to paint a primer.  It's going to rain all weekend long.  So it may take weeks until I get this painted.  I should get a primer in a bottle.  That'd be convenient for a small job like this. (no pun intended again)  

 

  • Like 4
  • Haha 2

Share this post


Link to post
Share on other sites

I ran the S10 two weeks ago and it was so dirty with clay dust/mud. It was only yesterday that I had the time to clean it fully inside and out including the diffs, changed the oil and cleaned the bearings too. Washed every bit of plastic and brushed those dirt off. Disassembled the motor and cleaned it too.

xdKdJTMh.jpg

teJAeALh.jpg

rMPvSdfh.jpg

ORI6t3Fh.jpg

vphBwcch.jpg

I'll never run on clay soil again. It just sticks to every hard-to reach corners and the dust is so fine that it can penetrate the gearbox. It also clogged the motor fan which ended up stuck.

  • Like 7

Share this post


Link to post
Share on other sites

Fixed the pull start on the mower so the lawn is lockdown ready for running on now. 
In-between giving my Wild Willy driver some finishing touch’s to his face. 
Using some Humbrol Metallic green that I’ve had forever applied with a bamboo kebab skewer, once tacky and the skewer point cleaned scraped the green for the iris to show the white through. Then the black for the pupil. 
I found the skewer much easier to use than a brush. Also used to highlight around the eyelids, tear ducts, and skin creases.

F59499B0-6C14-4945-9D7B-F49C41371886.jpg
 

 

  • Like 12

Share this post


Link to post
Share on other sites
5 hours ago, Juggular said:

 

TDeK1c4.jpg

As for the... er... front bumpers... Mrs. thinks they are too big. I agree with her because I only wanted to say, "it's no boy." (in a family-friendly manner, of course)  But it's very hard to take off (no pun intended). So they'll stay. 

Nice ‘Chassis’ mod 😉

  • Haha 1

Share this post


Link to post
Share on other sites
10 hours ago, TurnipJF said:

Today's ration of RC involved swapping the TEU-101BK in my brushed DT-02 for a RV12 in preparation for the motor upgrade that will form tomorrow's ration.

A quality plan, a little Tamiya a day keeps the boredom away 👍

 

  • Like 2

Share this post


Link to post
Share on other sites

As expected, I ended up working longer than planned, so RC stuff was somewhat limited last night. It was too cold to paint, and there wasn't enough time to get involved in bodywork on the Scorcher Rover (although I did make a cover plate for the radio box as the original is too tall) so I decided to start something new! :rolleyes:

I bought an M03 a couple of years back with the intention of getting it running so I could race with my mate at the local club. Unfortunately, the building they were using was just about to be demolished and didn't have anywhere else lined up, and then my mate got more into RC planes, so it kinda sat, (yes, like all my other stuff before anyone says it!) pretty close to finished but not running, sat in crate.

.

Here's what it looked like when I bought it:

s-l1600 (6) s-l1600 (1)

I'd stripped it all down, bought a set of ball races for it, new tyres, an iconic RC approved motor (cant remember the name now sorry)  a Manta Ray ball diff, a set of TRF dampers and rebuilt it all. The repro body I bought looked horrible around the arches, so I bought a bigger set of tyres (didn't look right) and then a set of bigger wheels and tyres which looked better, but they stuck out too much. So then I modelled up some shorter camber arms to tuck the top of the wheels under, which looked much better, but only if the car was stationary as they hit when the front wheels turned. I then bought a genuine Tamiya Mini body for which was in better condition but still needed the paint stripping and I've not got around to sorting that, and my aforementioned friend very kindly bought me one of the 1275 Mini shells, but I've just drawn a blank with what to do with it, and so it has sat since.

A little while ago I was browsing some showrooms on here and something caught my eye and imagination.

An idea was formed.

The web was scoured.

Parts were located and ordered.

And yesterday a screwdriver was utilised....

So I started by removing everything from the rear half of the M03

IMG_1382

Leaving me with this:

IMG_1383

Add a sprinkle of new parts (those M04 parts were harder to find than a triple ply cushioned toilet roll)

IMG_1387

Mix it all together and voila!

IMG_1384

So I need to model up some adaptors to fit the 2 halves together, buy another Manta Ray ball diff (I did order one but it never turned up, so will need to try again) and another motor of some description.

One upside of working from home now is that it's not quite so obvious that I'm working on RC stuff when I'm measuring up car parts at my desk - that said Mrs. Jon just walked in and said "that's funny looking work!" 😏

  • Like 5

Share this post


Link to post
Share on other sites

Eesh those M-04 parts are hard to find. My experience of twin-motor builds is that the additional weight doesn't offset the extra power. Unless it's a monster truck, in my experience it's disappointing :(

I'm all for a custom build but an MF-01X fulfils the M-chassis 4wd thing with less overall weight than you'll end up with. I feel bad now cos I'm poo-pooing your idea so please ignore my negativity! :lol:

Share this post


Link to post
Share on other sites

This is ringing some Minortaurish bells!. What wheelbase are you going for?

3D printing would accelerate this project. I had to hand carve and laminate ABS sheets.

Share this post


Link to post
Share on other sites
3 hours ago, ChrisRx718 said:

Eesh those M-04 parts are hard to find. My experience of twin-motor builds is that the additional weight doesn't offset the extra power. Unless it's a monster truck, in my experience it's disappointing :(

I'm all for a custom build but an MF-01X fulfils the M-chassis 4wd thing with less overall weight than you'll end up with. I feel bad now cos I'm poo-pooing your idea so please ignore my negativity! :lol:

Yup, it actually came with a complimentary packet of unicorn poo as they had some laying around going spare ;)

I know what you're saying about the MF-01X chassis etc, but lets face it - this isn't in meant to be in the slightest bit sensible or efficient - it's just a case of having a bit of fun!

Besides, you don't know what drivetrain i'm sticking in this thing! 😜

2 hours ago, Badcrumble said:

This is ringing some Minortaurish bells!. What wheelbase are you going for?

3D printing would accelerate this project. I had to hand carve and laminate ABS sheets.

It'll be the 210mm wheelbase to suit the Mini 1275 (or Cooper) shells I've got, but may see if I can make it adjustable.

Oh, 3D printing makes things so much easier, and a lot less messy and involve a lot less plasters in my case :)

 

  • Like 2

Share this post


Link to post
Share on other sites

Finished building my DN01 Zahhak, all working well (back garden shakedown):D.

Managed to paint the body & wing, got this far with stickers then gave up before I had dragons stuck all over myself.

I tried to take a photo outside, for once in the UK it's too sunny!

spacer.png

  • Like 5

Share this post


Link to post
Share on other sites

took my konghead to the beach, broke the cvd axle for the second time, the last time I run the car I broke one to, only the front seem to brake, on the rear of the car I have the tamiya cvd's to and they are fine, I am going back to dogbones on the front of the car.

I bought a tamiya TA-03RS porsche 911gt1 and some hopups, and a wr-02 chassis and a suzuki jimny body and some parts to build the car, most of the parts I have here In a box collecting dust, so now I have something to do.

49701397702_1f75c23b4a_c.jpgI

 

  • Like 1

Share this post


Link to post
Share on other sites

Today I realized that some of my RC tools are also my shaving tools :blink: that got me wondering... does my facial hair really need to share scissors with my tamiya builds? Is the situation that dire already?  Nah I think this one is on me:ph34r:

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites

Having completed my Cayenne Police car I feel a theme is developing, not sure if they ever had 6R4 panda car?????3067121606_9438e91e42_z.jpg.14fae02f5f7813d090c832a4647b98c7.jpgIMG_1872.JPG.429105a662f8b8378d0f45a1cbf9eec6.JPGIMG_1875.JPG.6b6aea2493140ed61cca48920ccf37ce.JPG

  • Like 4

Share this post


Link to post
Share on other sites

Today I carried on swapping motors, taking a generic 27t out of my brushed DT-02 and putting in a "Kenjo" 22t for a bit of a performance boost. This was made possible by the ESC swap I performed yesterday on the DT-02 along with the motor swap I performed on my drift TT-01 the day before which freed up the Kenjo.

The generic 27t was then fitted in my FF-01 which already has a suitable ESC, freeing up this:

2020-03-26_04-31-55

This is a virtually unused Reedy MVP 27t stock class motor, considered quite the performer back in the day. I think it was wasted in the FF-01, which has no racing aspirations, hides most of the motor in its gearbox housing and is stock apart from bearings, a steel pinion and a ballraced steering rack. It is far better suited to my TL-01LA, which displays it nicely and already has a few other blue bits to tie in with it visually. This is where it will end up in the next motor swap.

That will have to wait until another day though, as I have already had more than my daily ration of Tamiya, and I don't want to run out of things to do during lockdown. 😳

  • Like 2

Share this post


Link to post
Share on other sites
On 3/25/2020 at 9:06 AM, yogi-bear said:

3D printed a 70s style rim a friend modelled.

2020_03_25_made-1.jpg

 

started re-printing an Escort Mk 2. I'd done one earlier, but left it in the car on a hot day and it sagged quite badly.

2020_03_25_made-3.jpg

 

I've also started working on a trailer. The frame is made out of acrylic as its easy to laser cut, but I'll probably redo it in aluminium or wood at some stage.

2020_03_25_made-4.jpg

2020_03_25_made-5.jpg

Very cool Aussie 'Performance' wheels, so popular on the XW-XY Falcons 👍

On 3/25/2020 at 11:24 AM, Jonathon Gillham said:

I bought them from Speedi Models, speedimodels.nz . Stephen is a great guy, he ships nationwide but just did the free shipping for Auckland. He has a decent collection of Tamiya kits too and his prices are always good, cheapest Top Force that I can find

Stephen is a great guy, what happened to his shop on the shore?

My LHS will do the 'stick it out the back door, no contact' if I want anything 😁

Although we have the RC equivalent of toilet paper, he cannot keep TS-13 Clear in stock!

  • Like 1

Share this post


Link to post
Share on other sites
3 hours ago, Busdriver said:

Having completed my Cayenne Police car I feel a theme is developing, not sure if they ever had 6R4 panda car?????3067121606_9438e91e42_z.jpg.14fae02f5f7813d090c832a4647b98c7.jpgIMG_1872.JPG.429105a662f8b8378d0f45a1cbf9eec6.JPGIMG_1875.JPG.6b6aea2493140ed61cca48920ccf37ce.JPG

Image result for Rover metro police car

  • Like 2

Share this post


Link to post
Share on other sites

Made a short drive shaft for my Porsche 934 with the custom carbon chassis plates.

Its the standard kit hard shaft with the ends cut off and a dab of araldite into a 3mm ID brass tube (then a bit of autosol)

I did buy some 5mm carbon tubes with a 3mm ID but the hole through the tube didnt look very central which would cause it to run out of balance.

And theres already enough carbon on the chassis the brass is a nice contrast

Resized_20200326_203952(0)_9114.jpeg

Resized_20200326_203830_9570.jpeg

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...