Peter_B 997 Posted April 3, 2020 25 minutes ago, BP2411 said: Comical hornet is £100 @ time tunnel. Yes, I saw that but it's without the ESC included. Share this post Link to post Share on other sites
jonboy1 2943 Posted April 3, 2020 13 minutes ago, Peter_B said: Yes, I saw that but it's without the ESC included. I'd take this as a sign Peter - the last thing you need are some more cars to build - sorry, I mean store Share this post Link to post Share on other sites
trev82 179 Posted April 3, 2020 Preparing some weekend plans. Stadium thunder build. 😀. 9 Share this post Link to post Share on other sites
mman2005 443 Posted April 3, 2020 5 hours ago, moffman said: Did a bit more on my dark impact (last night actually) still having trouble with the thick wires and the lack of space! I know what you mean about lack of space. Hard to make it look pretty in there Share this post Link to post Share on other sites
yogi-bear 2321 Posted April 4, 2020 This week, help a mate build a shed: and painted and stickered by Mad Bull finally. I used left over Hornet stickers. Not the best paint job (its pretty rough close up) and I'll probably add a bit more to the rear wing, but it'll get bashed around when its driven so I am not too concerned. I'll have to find a driver for it too at some point, but for now I'll consider this done. 7 Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted April 4, 2020 Designed and printed some LED bezels for the King Yellow body... Going to print some light pipes/LED holders tomorrow. 6 Share this post Link to post Share on other sites
Thommo 1217 Posted April 4, 2020 Finished a couple of LEGO / Tamiya replicas ! Ford F150 Truck and a Holiday Buggy micro. 14 Share this post Link to post Share on other sites
lsear2905 1279 Posted April 4, 2020 I've been running my HPI Q32 on the pool table! 2 1 Share this post Link to post Share on other sites
Peter_B 997 Posted April 4, 2020 So far this morning I've used my recently arrived VRC adapter to test 2 also recently arrived HPI receivers. Both adapter and receivers work fine and VRC is alot better with a transmitter than keyboard or gamepad. Still couldn't manage a clean lap in the few minutes I was testing though 1 Share this post Link to post Share on other sites
c64orinoco 667 Posted April 4, 2020 I may have gone and bought a Frog. Let me just check. Yes, yes I did buy a Frog. Well 35 years ago I really wanted one! 1 3 Share this post Link to post Share on other sites
c64orinoco 667 Posted April 4, 2020 The apocalypse home quarantine build queue. The top is a M07R, the Frog can't be touched until my birthday. 6 Share this post Link to post Share on other sites
Peter_B 997 Posted April 4, 2020 Some body shell progress as well today. Trimmed the Hornet body and wing. Also trimmed a Super Hotshot body for my lads car. This time I managed to cut the slots without mangling it. I wish I was better at trimming body shells, scissors or score and snap, I just never get a very good finish. I also did a little test, on a scrap of lexan, of molotow liquid chrome with PS-5 black, to check for any reactions. Share this post Link to post Share on other sites
Oneball1971 127 Posted April 4, 2020 4 hours ago, c64orinoco said: I may have gone and bought a Frog. Let me just check. Yes, yes I did buy a Frog. Well 35 years ago I really wanted one! Quick counter balance it by buying another one. 1 Share this post Link to post Share on other sites
moffman 5752 Posted April 4, 2020 Finished my dark impact couldn't get the brushless system to fit in it without butchering the body and I'm not prepared to go down that road so it's got the TBLE-02s brushed/brushless and GT tuned motor in it! I'll save the brushless system for the super astute build! I put the limited edition blue gear cover and blue wheel nuts on just to add a bit of bling its looking pretty cool the picture don't really do it justice! 20 Share this post Link to post Share on other sites
Oneball1971 127 Posted April 4, 2020 4 hours ago, c64orinoco said: The apocalypse home quarantine build queue. The top is a M07R, the Frog can't be touched until my birthday. Now that's just being greedy! 🙂 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted April 4, 2020 Applied all 70 stickers to my CC01 Mercedes body. You'll not be able to do this one at all without the use of a hairdryer / heat source, the contours some of the decals have to sit on are mental. Then there's the really small ones. Reeeee-diculous!! 6 Share this post Link to post Share on other sites
Badcrumble 4203 Posted April 4, 2020 After a lockdown inspired garage and garden tidy I grabbed the opportunity to...play with RC! My WW2 had a severed motor wire from a clash with a Dual Hunter so I swapped it with a motor from said 'Hunter (exchanging pinions) which is in bits after a beach run. The now rusty silver can fired up no problem. El Kid was taking an interest now so I thought I would finally try out the Carson mini tx/rx combo I got for him... but the steering servo plug wouldn't fit the rx. So we got going with the big Carson set he had been using. He got the WW2 jumping well over a box lid ramp. While he and Mrs BC had a back garden badminton break (what else?!) I investigated the Carson rx further - snipped off the guide tab from the servo plug et voila...fits! El Kid is now well happy with the controller that better fits his paw. Steering and throttle adjustment is nowhere near as good as the larger Carson - just a full / half option. I should really read the manual.... No pics, I'm afraid - was having too much fun! 4 Share this post Link to post Share on other sites
MadInventor 3884 Posted April 4, 2020 Added new shocks to a new ladder chassis I've built for my new 6x6 truck 8 Share this post Link to post Share on other sites
Superluminal 3750 Posted April 4, 2020 They look nice - what ones are they? Share this post Link to post Share on other sites
SimonL 71 Posted April 4, 2020 Finished a Mercedes AMG GT3 body I have been working on. Not totally happy with the paint job, but it’s ok - backed the iridescent purple/green with silver, with a silver stripe down the middle of the body in the hope that the body color would offset the stripe, but the iridescent effect is fairly minor. Kept the stickers to a minimum this time..... Also started work on an M-07R Kit - completed parts bag A 4 Share this post Link to post Share on other sites
Supercoolnothing 721 Posted April 4, 2020 Got a bit more work done to my Clod build, most of the detail painting and about half of the decals applied. 11 Share this post Link to post Share on other sites
Peter_B 997 Posted April 4, 2020 This afternoon also held some RC related goodness. As the weather was good, and the garden mown, I charged up some packs for my boys to run their King Yellow and Lunchbox. First issue was the LB wheels spinning in the tyres. Fixed that with some rubber bands in the wheel beads. Next problem was with the battery in the King Yellow dying in less than 10 minutes - not good for a 5000mah pack that usually lasts the best part of an hour. Putting that pack on the charger and the charger said it was done in about 2 minutes. So I think that pack is toast. Got the King Yellow running with the pack I was going to run in my WW2. Will have to look for some new NiMH packs now. 3 Share this post Link to post Share on other sites
ThunderDragonCy 7878 Posted April 4, 2020 Did a trial fit on the rapid prototyped 4 gear transmission for my FF03. Definitely took it too far in some places (diff height and layshaft position), and not far enough in others (clearance the linking bulkhead), but definitely promising. The s is why you prototype, right? Looks tiny a really low compared to the kit transmission. Excited for the final design. 7 Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted April 4, 2020 6 hours ago, moffman said: Finished my dark impact couldn't get the brushless system to fit in it without butchering the body and I'm not prepared to go down that road so it's got the TBLE-02s brushed/brushless and GT tuned motor in it! I'll save the brushless system for the super astute build! I put the limited edition blue gear cover and blue wheel nuts on just to add a bit of bling its looking pretty cool the picture don't really do it justice! @moffman, I have a set of 49435 DF03 Damper Cylinder (Blue) if you're interested. They're the same clear blue as your spur cover. Yours for the taking, just cover postage. 3 Share this post Link to post Share on other sites
Saito2 6686 Posted April 4, 2020 Chased my kid around the backyard with my Blackfoot (it didn't break for once). Yesterday I finally painted my Ultima body and today I stickered it up, assembled the rollcage and finished the buggy up. Looks great. Again, if anyone's on the fence about a Kyosho rerelease, go for it. They are fabulous. 3 Share this post Link to post Share on other sites