mongoose1983 3335 Posted May 11, 2020 15 minutes ago, Ferruz said: @mongoose1983 thank you! I may still use it for a future competition Hahahahahaha Share this post Link to post Share on other sites
Jonathon Gillham 4606 Posted May 11, 2020 Ran the Monster Beetle and B6D and true to form I need to order even more parts as the front arm on the B6D is a bit floppy. Should really make these shelfers. Also made a start on the Super Astute and I'm really impressed. Finished bags A and B and the quality is great and it all goes together so well. I can see why the kits are so pricey, its a step up from the Top Force. My son tried to help but unfortuantely its not really a kit for a 6yo. Thinking a Hornet could be a good birthday present as I've never built one and he might be able to do more of the build. 3 Share this post Link to post Share on other sites
Busdriver 6209 Posted May 11, 2020 Painted up the pilots for my 1/35th scale Hughes littlebird 5 Share this post Link to post Share on other sites
jonboy1 2943 Posted May 11, 2020 This bank holiday I spent Friday and some of Saturday out in the garden cutting back everything in sight with my new hedge trimmer (good lord, they're amazing aren't they! ) and then planting new stuff to replace the stuff I over trimmed. Unbeknown to me, during this time I managed to give myself a very red tribal stripe across my lower back (the tribe being that of "those who sunburn really easily and should know better by their age") so I spent the rest of the weekend sitting uncomfortably. Soooo, I sent myself off to the garage for the remainder of the weekend and pootled in a vertical attitude to distract myself from the burning griddle mark on my back. To aid in this I finished up the rear lights for the Scorcher Rover. I toyed with the idea of using some trimmed Scorcher rear lights but I preferred the fact that these lay flat, so to give them a little more definition I scribed some lines into them to designate the different sections. A little tweak, but a good one I think. Next up was to make a windscreen, repaint the rear guard as I didn't like the colour, repositioned the motor up a bit and devised a away to fix it to the gearbox casing and assemble the interior and driver. Oh, and I made a dial and some switches for the dash. Nearly there! Following that I spent a few happy hours sticking decals on a body for @acprc and then to finish off the productiveness of the weekend I completed the rebuild of the stadium truck I bought a while back. It was an unknown entity I saw on ebay with no bids on it. It looked nicely made, I fancied a tinker with something new, so I put in a cheeky last second bid and got it for £20! Upon receipt I did some digging and eventually by googling the lettering on the front tyres found it was a Team Academy RT Sport. This is what it looked like when I bought it: All I've done is strip it apart, give it a thorough clean, replace all the wrong screws (there were a lot of those) replace the bushes with bearings, stick a new motor on it, regrease everything, paint the wheels and buy some nice new schumacher mini dot rear tyres. It's missing a gear cover, so I might have to 3D print something for it. I haven't decided what to do with it yet. I've got a spare Rock Socker body which I reckon should fit so at some point over the next 3 years it might get that stuck on it. Otherwise I might just sell it, although I don't get the impression there's a big market for these, so, we'll see. 11 Share this post Link to post Share on other sites
Wetman 417 Posted May 11, 2020 Been to work, was given three "emergency" jobs, 2 of which didnt even have the decency to be in changed akitchen waste trap and back home again to wait for any other jobs. So currently sat with one eye on my phone and one eye on the street awaiting to see if Mr UPS man is going to bring me something nice Share this post Link to post Share on other sites
Re-Bugged 10146 Posted May 11, 2020 Replaced the shiny shelf wheels on the Wild One with its runner wheels, charged a battery, made a ramp, put the WO and MB in the van and went out 12 Share this post Link to post Share on other sites
Grotty Otty 868 Posted May 11, 2020 Swapped out the Hobbywing 1060 and 21t double brushed for a Tble-02 and 13.5t Speed Passion Brushless in the FF-03. Experimented with a Lipo and the 1060 but it just wasted a load of power with wheelspin as its only FWD. The Tble-02 gives me much better controllable brakes and usable power with the brushless motor and a Nimh battery. I think it's a little bit quicker top end too. Just waiting on some dual cardin drive shafts and some carbon reinforced parts for it. It's got the turning circle of an oil tanker with it set up to avoid massive chatter at too acute steering angles! Still mightily impressed with it however. 4 Share this post Link to post Share on other sites
trev82 179 Posted May 11, 2020 Buttoned up the tamiya konghead. Body shell tested me big time. Decided to go dark metallic blue. 9 Share this post Link to post Share on other sites
78Triumph 2610 Posted May 11, 2020 Started decals on a fresh Frog body. Untitled by Joe, on Flickr 12 1 Share this post Link to post Share on other sites
Yonzariq 114 Posted May 11, 2020 Finished the rebuild of my DT-03. Only to destroy one of the pins in the 3Racing CVD's 20minutes later 1 1 Share this post Link to post Share on other sites
TurnipJF 9192 Posted May 11, 2020 Oh dear... Could this be why? 😁 1 6 Share this post Link to post Share on other sites
Nicadraus 6198 Posted May 11, 2020 3 hours ago, Grotty Otty said: Swapped out the Hobbywing 1060 and 21t double brushed for a Tble-02 and 13.5t Speed Passion Brushless in the FF-03. Experimented with a Lipo and the 1060 but it just wasted a load of power with wheelspin as its only FWD. The Tble-02 gives me much better controllable brakes and usable power with the brushless motor and a Nimh battery. I think it's a little bit quicker top end too. Just waiting on some dual cardin drive shafts and some carbon reinforced parts for it. It's got the turning circle of an oil tanker with it set up to avoid massive chatter at too acute steering angles! Still mightily impressed with it however. Nice to see another FF rally car. It's a sweet rally runner isn't it. Hope to see more updates. Don't hesitate to ask questions or assistance if you may. 1 Share this post Link to post Share on other sites
Finnsllc 917 Posted May 11, 2020 charged up my first ever lipo, see how this goes 3 Share this post Link to post Share on other sites
Smidsy 46 Posted May 11, 2020 Taken my Hotshot 2 out for the first time in months. Is been in a box in bits until recently. Originally a rear drive cup snapped. Then I found the rear shock tower was cracked. It's now got a carbon fibre one. Then I round the rear gearbox had a crack. Finally got it back together a couple of weeks ago. 3 Share this post Link to post Share on other sites
bugged 6 Posted May 11, 2020 Took a walk down the beach a low tide, Perfect sand scorcher territory ! And posted a thread in the Wanted/Sales and Trades for some m01/m02 Parts I need. 1 Share this post Link to post Share on other sites
Finnsllc 917 Posted May 11, 2020 Just had the pleasure of meeting @jongrill here in NJ. And came away with a nib M06 VW bus. Nice to meet a fellow member and chat for a bit. 3 Share this post Link to post Share on other sites
Kitzbuehel74 146 Posted May 11, 2020 Made a bit of progress on the Blackfoot today, only waiting on new front wheels to finish build. Also waiting on stickers from MCI, they were posted out a couple of weeks ago, has anyone in the UK received orders from them recently? 5 Share this post Link to post Share on other sites
mman2005 443 Posted May 11, 2020 Masked and started painting my DF03 Team Azarashi shell. Completely missed some sections of the windows for masking what a plum. Planning on doing the remainder in pearlescent white (once I get my can delivered). In the meantime I can't decide whether to try and blend blue into white (where the yellow circle is) or leave it as is. Any opinions very welcome 2 Share this post Link to post Share on other sites
Grumpy pants 4485 Posted May 11, 2020 Packed a box of 3 lots that sold on eBay to the same chap to send out tomorrow. 10 cars left at the moment and less spares and surplus kit- much more space in my daughters wardrobe 😂 8 models now out on the display, 2 left to restore- comprising 5 vintage, 5 modern. Happy dayz as they say 😊 3 Share this post Link to post Share on other sites
ThunderDragonCy 7878 Posted May 11, 2020 @mman2005 looking forward to seeing this. Love Azarashi shells 1 Share this post Link to post Share on other sites
mman2005 443 Posted May 11, 2020 24 minutes ago, ThunderDragonCy said: @mman2005 looking forward to seeing this. Love Azarashi shells Me too! initially I wanted it professionally painted but my expectations of a professional finish are too high and I couldn't find anyone I trusted. Going slightly different to what I wanted but fingers crossed I can pull it off. Will post an update once sprayed. I have some leonis stickers I am going to try and utilise. 1 Share this post Link to post Share on other sites
mman2005 443 Posted May 11, 2020 27 minutes ago, ThunderDragonCy said: @mman2005 looking forward to seeing this. Love Azarashi shells Also Cy, what do you think? Leave the blue with a crisp line from the bottom of where the vent will be (as it is now) or try and fade the blue along the top slightly into white? Share this post Link to post Share on other sites
ThunderDragonCy 7878 Posted May 11, 2020 6 minutes ago, mman2005 said: Also Cy, what do you think? Leave the blue with a crisp line from the bottom of where the vent will be (as it is now) or try and fade the blue along the top slightly into white? Oooo i don't know. I'd be terrified of trying a fade, but then i don't know how good a painter you are. The blue looks ace. Share this post Link to post Share on other sites
mman2005 443 Posted May 11, 2020 5 minutes ago, ThunderDragonCy said: Oooo i don't know. I'd be terrified of trying a fade, but then i don't know how good a painter you are. The blue looks ace. I'm terrified as well I've not done it before and I know against the white it will look ugly if not done properly. I will ponder. Thanks for the input though. The blue is PS16 and then faded (hopefully) and backed with PS59. 1 Share this post Link to post Share on other sites
ThunderDragonCy 7878 Posted May 11, 2020 @mman2005 Good luck! 1 Share this post Link to post Share on other sites