Busdriver 6209 Posted May 15, 2020 Well apart from spending a huge amount of money in the last 2 days I built this. Its not finished but the colur scheme is now my Team colours. Also got all the pickups out and gave them a dust off Not sure the Aqroshot is a pickup but its not a buggy either!!! 8 1 Share this post Link to post Share on other sites
Smidsy 46 Posted May 15, 2020 Took the black JPS Terra Scorcher out for a quick first run. Went well, just needed the braking turned down on the ESC. https://youtu.be/gPQt4PaIkww Share this post Link to post Share on other sites
Fruitfly01 596 Posted May 15, 2020 I've had this TA03F since it was released sometime in the late 90's. It was kit 58210, Subaru Impreza WRC. Colin McCrae was everywhere at the time, and after getting my kicks playing his rally game on the Sony Playstation, I didn't think twice about buying Tamiya's incarnation of this amazing car. The TA03F is an important chassis in Tamiya history. It is their first commercially available belt driven chassis, first released as kit 58177, a race oriented 'pro' model with a twin deck FRP chassis and various option parts fitted. A plastic tub, entry level model was released later, fitted with an Audi bodyshell, plastic bearings, gear differentials, and various other typically Tamiya components, aimed at keeping the price low with easy assembly. The pro model managed to win several major U.S. titles in the hands of David Jun who managed to take on the likes of Team Associated and come out on top. The TA03F took on the best and won. This pro chassis would be re-released as the David Jun limited edition, fitted with almost every option part going. Carbon fibre chassis, alloy shocks, lightweight diffrential gears and plenty of other items. Since purchasing the Subaru I have been slowly modifying it and collecting parts for it. I never did like the grey plastics that Tamiya used on this chassis, and when mated up to a FRP or carbon fibre chassis, they looked even more ugly, especially when compared to the David Jun edition. So, for a long while now, I have been collecting black plastic parts, specific to this chassis, as well as various hop up items. There's plenty more items to obtain, and it will likely be years before I'm finished with this one. As the car is today - managed to find and install the front bumper. Low friction dampers TA03 lightweight ball differentials 9 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted May 15, 2020 Big fan of the TA03 family @Fruitfly01, very nice example you have there. I obsessed over them years ago, only have a couple left now (at one point I had 5). I've so far avoided the carbon chassis plates because I think if I fitted them I'd never use it again for fear of scratching them!! 1 Share this post Link to post Share on other sites
howaboutme 247 Posted May 15, 2020 Finished up (mostly) of my TT-02 upgrade. First time soldering in a few years, totally messed up the bullets, they don't look very clean. A bit better with the motor though. Cut down the wires so it's not as messy. Programmed ESC and tested, all good. Steering is way off and binding so I have to check it. Maybe the next (and final) upgrade for this. Then cut out my temporary/beater body for bashing so the box art (MB AMG GT) can stay home. $16 US from Amazon, pre-painted. Not bad. Looking forward to seeing how cool this thing can be on 2S 90C Lipo with 13.5T brushless motor on 72/35 spur. 2 Share this post Link to post Share on other sites
Oneball1971 127 Posted May 15, 2020 1 hour ago, Fruitfly01 said: I've had this TA03F since it was released sometime in the late 90's. It was kit 58210, Subaru Impreza WRC. Colin McCrae was everywhere at the time, and after getting my kicks playing his rally game on the Sony Playstation, I didn't think twice about buying Tamiya's incarnation of this amazing car. The TA03F is an important chassis in Tamiya history. It is their first commercially available belt driven chassis, first released as kit 58177, a race oriented 'pro' model with a twin deck FRP chassis and various option parts fitted. A plastic tub, entry level model was released later, fitted with an Audi bodyshell, plastic bearings, gear differentials, and various other typically Tamiya components, aimed at keeping the price low with easy assembly. The pro model managed to win several major U.S. titles in the hands of David Jun who managed to take on the likes of Team Associated and come out on top. The TA03F took on the best and won. This pro chassis would be re-released as the David Jun limited edition, fitted with almost every option part going. Carbon fibre chassis, alloy shocks, lightweight diffrential gears and plenty of other items. Since purchasing the Subaru I have been slowly modifying it and collecting parts for it. I never did like the grey plastics that Tamiya used on this chassis, and when mated up to a FRP or carbon fibre chassis, they looked even more ugly, especially when compared to the David Jun edition. So, for a long while now, I have been collecting black plastic parts, specific to this chassis, as well as various hop up items. There's plenty more items to obtain, and it will likely be years before I'm finished with this one. As the car is today - managed to find and install the front bumper. Low friction dampers TA03 lightweight ball differentials Those diffs look nice 1 Share this post Link to post Share on other sites
Butler 338 Posted May 15, 2020 managed to get this wired up before being too leathered to use a soldering iron 7 2 Share this post Link to post Share on other sites
Mark_C 198 Posted May 15, 2020 I've just put in a 3d printing order for: x2 CW-01 gearbox braces x2 CW-01 strut braces x4 CW-01 wheelie bar wheels x8 Lunch Box body pegs x2 sets of Midnight Pumpkin body mounts A couple of years ago I used 3dhubs to print some of this stuff, it was preally good because the job was farmed out to a hobbyist with a printer and they'd complete the order and post it. It was really cheap too, the gearbox / strut braces were £1-2 each. Seems 3dhubs have changed their business model and don't use local printers any more. When I did a quote they slapped a £63 surcharge on the order! what a joke. I've found another supplier () who is pretty cheap, but does have a minimum order charge of about £19, hence ordering what I need and then spare sets of body mounts to bulk up the order. Hopefully it all works out, although the ordering system seems ot have a glitch just at the moment with the order status. Share this post Link to post Share on other sites
J@mes 2326 Posted May 16, 2020 7 hours ago, Busdriver said: Recently I took delivery of a 1/35 Tamiya Sheridan. I may have mentioned at the time that what I really wanted was the 1/16th RC version. Well it may have been the Vodka but now have a confirmed order from Tamico for a full option RC Sheridan. Now there's another thread I can pester you on. I may have loads of questions I’ll be following with interest. Would love a tank but wow those prices! Share this post Link to post Share on other sites
JeffSpicoli 1363 Posted May 16, 2020 Working on my BlockHead Motors Race BRAT body. Painted the new surfboard for the other body. Detail painting. 4 Share this post Link to post Share on other sites
TheMidnight Pumpkin 260 Posted May 16, 2020 I just went through 40+ pages of youtube videos on the TC forum. I'm a bit burnt, but it was interesting... 3 Share this post Link to post Share on other sites
Finnsllc 917 Posted May 16, 2020 discovered not to mess with my honey bees after 7:00pm haha as i was tagged on my eyebrow, ear, nostrol and neck. but hey, i got my dn01 running 2 Share this post Link to post Share on other sites
Finnsllc 917 Posted May 16, 2020 oh, and repaired the top force, sand viper, supershot and m-06 from yesterday and todays bashing 1 Share this post Link to post Share on other sites
JeffSpicoli 1363 Posted May 16, 2020 slow and steady progress. debating on cargo net and spare wheel in the bed, fuel cell/nitro, roll bar color - black or white, probably black. 6 Share this post Link to post Share on other sites
Busdriver 6209 Posted May 16, 2020 6 hours ago, J@mes said: I’ll be following with interest. Would love a tank but wow those prices! It’ll be our little secret 😎 Share this post Link to post Share on other sites
Grumpy pants 4485 Posted May 16, 2020 Swooped into the PO 1st thing and sent parts out to 4 TC members 💥 Share this post Link to post Share on other sites
moffman 5752 Posted May 16, 2020 Nothing rc related! Took down my old shed before it fell down then sat from 9.30 to 11.30 in the queue to get into the council recycling centre (with said shed) then another 45 minute queue to actually put the rubbish in the skips (the way the local council are doing this 2m distancing is local council logic which to the local citizens is anything but logic) Share this post Link to post Share on other sites
Busdriver 6209 Posted May 16, 2020 20 hours ago, Busdriver said: Well apart from spending a huge amount of money in the last 2 days I built this. Its not finished but the colur scheme is now my Team colours. Also got all the pickups out and gave them a dust off Not sure the Aqroshot is a pickup but its not a buggy either!!! Finished doing all the stickers on the Titan. I really like the look. Kept it very simple. Then I got the Agroshot out In the words of the comedian Harry Hill "FIGHT!!!!!!!!!!!!!!!" 1 Share this post Link to post Share on other sites
Juhunio 6830 Posted May 16, 2020 Painted and decorated a new wing for my Avante Lotus DF03. I like the Avante shell on the DF03, seems better proportioned than the DI shell and is a better fit for all the cabling. But didn't really like the wing So used the DI wing instead, and very happy with the result 12 1 Share this post Link to post Share on other sites
TurnipJF 9192 Posted May 16, 2020 1 hour ago, Busdriver said: In the words of the comedian Harry Hill "FIGHT!!!!!!!!!!!!!!!" With the Aqroshot wearing those tyres, my money would be on the Titan. 1 Share this post Link to post Share on other sites
Grumpy pants 4485 Posted May 16, 2020 Just bought an Acoms switch and AA battery holder for my Hilux, a vintage front bumper for my Super Champ and stick covers for my Super Champ Acoms Handset. Share this post Link to post Share on other sites
Kitzbuehel74 146 Posted May 16, 2020 Got stickers on my old Blackfoot body 😊 10 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted May 16, 2020 Turned the kitchen into a soldering station. The wife was delighted! The GF01 lives again 4 2 Share this post Link to post Share on other sites
Butler 338 Posted May 16, 2020 Bruiser radio box. Hoping it’ll be fully waterproof. 1 1 Share this post Link to post Share on other sites
ThunderDragonCy 7878 Posted May 16, 2020 Lovely long (30+ mins) run with my FF03 tonight on the blissfully still deserted estate roads near my house. Back with the race shell. Loving this car. 8 Share this post Link to post Share on other sites