lsear2905 1279 Posted July 21, 2020 Oh, I also was lucky enough that the local high school left their undercover area unlocked over the weekend. What a magnificent spot to run during inclement weather! 11 Share this post Link to post Share on other sites
Jonathon Gillham 4606 Posted July 21, 2020 Finally got around to fitting the Dynastorm tower and Top Force hi caps to my Super Astute. I looks great and was a welcome change after finishing work today (one of those days of reviewing contracts and stuff). Unfortunately I messed up the decals for the body weeks ago and as a result haven't finished it. New decals are far too expensive so will just have to live with it. 3 Share this post Link to post Share on other sites
Re-Bugged 10150 Posted July 21, 2020 I was a bit stuck for an idea for the main site space comp until today then came up with this https://www.tamiyaclub.com/showroom_model.asp?cid=135907&id=49381 Time to crack open the Shepard Neame Spitfire ale the wife bought me the other day to mark the occasion I think 7 Share this post Link to post Share on other sites
Badcrumble 4204 Posted July 21, 2020 1 hour ago, Re-Bugged said: I was a bit stuck for an idea for the main site space comp until today then came up with this https://www.tamiyaclub.com/showroom_model.asp?cid=135907&id=49381 Time to crack open the Shepard Neame Spitfire ale the wife bought me the other day to mark the occasion I think Like it! Big fan of Shepherd Neame too. I'm out of Spitfire at the moment. My comp entry is 'in paint' just now. Hope to have it entered soon! 2 1 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted July 21, 2020 Orderd sponge tires for my FF03 and its speed runy 4 Share this post Link to post Share on other sites
Re-Bugged 10150 Posted July 21, 2020 🍻 Cheers @Badcrumble, wow seeing ‘Faversham’ brings back memories of my apprentice chippy days down the road in Sittingbourne, and I sold my VW Beetle to a guy from Whistable in 2006. It was a yellow with black wings, probably long retired by now I should think. Looking forward to seeing your (and others) comp entry(s) I think there’s going to be good ones chasing that great prize that’s up for grabs. Good luck 👍🏻 2 Share this post Link to post Share on other sites
mastino 1085 Posted July 21, 2020 41 minutes ago, Fabia130vRS said: Orderd sponge tires for my FF03 and its speed runy Wow... millenial. Share this post Link to post Share on other sites
Lee76 638 Posted July 21, 2020 I can now tick this one off the list of things I wanted when I was a kid.. some 30 years late.. Now thinking of what’s next on the list... Not much in the shops at the moment. I know I need a second body so I can drive this car without fear of smashing it up.. but then there’s the Hornet my older cousin had and wouldn’t let me touch.. I think I like the choosing part as much as the building, but then I spent years in this phase as a kid just window shopping the catalogues. 9 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted July 21, 2020 6 hours ago, mastino said: Wow... millenial. What does this mean? I know they are old but is this rare? Share this post Link to post Share on other sites
Finnsllc 917 Posted July 21, 2020 9 hours ago, Badcrumble said: Like it! Big fan of Shepherd Neame too. I'm out of Spitfire at the moment. My comp entry is 'in paint' just now. Hope to have it entered soon! going to take my space pic shortly. 2 Share this post Link to post Share on other sites
TurnipJF 9192 Posted July 21, 2020 3 hours ago, Lee76 said: I can now tick this one off the list of things I wanted when I was a kid.. some 30 years late.. Now thinking of what’s next on the list... Not much in the shops at the moment. I know I need a second body so I can drive this car without fear of smashing it up.. but then there’s the Hornet my older cousin had and wouldn’t let me touch.. I think I like the choosing part as much as the building, but then I spent years in this phase as a kid just window shopping the catalogues. As someone who also had a cousin with a Hornet, I can thoroughly recommend getting one. The feeling of finally building one of your own, and then speccing it higher than your cousin's one, is rather satisfying I can tell you! 3 Share this post Link to post Share on other sites
mastino 1085 Posted July 21, 2020 1 hour ago, Fabia130vRS said: What does this mean? I know they are old but is this rare? I think they're just old; I used them several years ago on my TT ts4n. Ellegi_GRP tyres were very common. 1 Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 21, 2020 Just finished building the TRF shocks I got along with the M07 that arrived last week. I figured I'd do this to entertain myself until the m3 thread tap arrived so I can start getting to work on the M07 itself. It will be so nice to have ready-made shocks to install when I get to that step in the manual 7 Share this post Link to post Share on other sites
lsear2905 1279 Posted July 22, 2020 So as a follow up to my purchase of the Kyosho Mini Z 4x4 Surf 4Runner - it arrived yesterday. In a box, no bubble-wrap, just loose in the box. No spares, no instructions and some flat batteries. It was missing the rear spare tire (and arm that holds this in place). The steering must've been knocked in transit so I removed the steering arm from the servo and re-attached it. Everything got a very thorough clean with disinfectant (yay 2020) and the body was cleaned up and a couple of touch-ups applied to the rear-view (wing) mirrors and the flared guards with a black Gundam marker. I have spoken to the seller and he thinks he has the parts that were missing (he's an odd combination of accommodating and standoff-ish) so hopefully I can get the spare tire, pinions and motor mounts that come in the kit. I actually was planning on taking the rear tire off anyway, but I would like to have it if he can find it. Bear in mind I paid AUD$230 for this, and they sell for AUD$370 - but they're sold out everywhere, and Melbourne is back in 'lockdown' so my movements are very limited. So, am I happy? Absolutely. This thing is sensational to look at and (based on my limited running in the wet and dark outside last night) very capable. I have a day off tomorrow so I'm going to get some crawling in and then some really nice photos, too (weather permitting). Pictured is the T301, SW01, HBX Devastator, Kyosho and a Fujimi 1:24 Toyota FJ Cruiser static model. 5 Share this post Link to post Share on other sites
Wetman 417 Posted July 22, 2020 Err kind of got bored and started playing with plasticard again 10 Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 22, 2020 I finally started my M07 build. The M3 thread tap arrived so I went at it. I discovered that tapping screw holes was slightly more useful for aluminum screws than titanium, since it becomes really easy to tell when they bottom out, so you can apply just enough pressure for them to hold, but not snap. Titanium screws are tougher, so no worries there. I took a few pictures along the way (just did the first 5 or 6 steps), but I'm sure everyone's seen an M07 being assembled before. I will add a pic or two later. 2 Share this post Link to post Share on other sites
rwordenjr 1890 Posted July 23, 2020 Reproduction decals for the Hornet have arrived. All original except for 1 detail. Can anyone spot what it is ? 1 Share this post Link to post Share on other sites
Ferruz 11702 Posted July 23, 2020 I didn't have much time for rc these last few days, but I managed to go for one more shred in the woods with the good old Boss after work! wildlife patrol... 6 Share this post Link to post Share on other sites
lsear2905 1279 Posted July 23, 2020 So I made an executive decision yesterday: rather than wait for all the spare parts for the Konghead to become available, I just bought a brand new one! I figure by the time I make the new one with the clear chassis and coloured gears and sell off the old one with all the stock friction shocks, etc, that I won't have lost any money, and I get the joy of building a brand new one! The only thing I'm not sure about though is whether I keep my existing body - I'm sentimental, and I also find it one of the most annoying bodies to paint! Also, I got to run my Kyosho this morning, but it's looking like it's going to rain a lot this afternoon, so that sucks. I find it incredibly nose heavy (on a descent it likes to do a forward roll), so maybe that missing spare tire is hanging out over the back for a reason... the flip side being it climbs like a champ! 8 Share this post Link to post Share on other sites
Wez-li 1790 Posted July 23, 2020 Got two of my four recently found m-cars out, ready for the teardown. So. Much. Dust. 4 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted July 23, 2020 On 7/21/2020 at 9:56 PM, mastino said: I think they're just old; I used them several years ago on my TT ts4n. Ellegi_GRP tyres were very common. The arrived today, and I must say... your post got me a little bit suspicious did I buy used wheels. But yup they arrived in as new condition. Very happy about them. I am not very sure about m understanding in foam tire shapes, but the are all I think under a certain degree? Also for nitro use usually 1 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted July 23, 2020 1 hour ago, Wez-li said: Got two of my four recently found m-cars out, ready for the teardown. So. Much. Dust. I wish I would be able to source a M01 in such a condition. More interesting then buying a rebuild model. 2 Share this post Link to post Share on other sites
Ferruz 11702 Posted July 24, 2020 I still have to get used to the idea, but it seems that my little RC dream of owning a mint Marui Shogun has come true. I've just purchased one for, ehm, not exactly cheap (especially considering shipping + dreaded possible customs, crossing my fingers for the latter), but considering its incredibly good conditions it was well worth it. Unless the seller tricked me, which by the pics is unlikely, it is a fully original, never ran Shogun without a single scratch. Should be here in a couple weeks... cautious "yay" for now.. 7 Share this post Link to post Share on other sites
xzenonuk 79 Posted July 24, 2020 lunchie got some mods, upper front supension brace, foam in tyre's then i glued em and braced the wheelie bar, good garden fun followed also have a 5th shock, only built it a few days ago and all the mods have cost 0 pennies love the lunchie, i had the original kyosho tracker back in the day and burnt of a gold tub rc10 in a straight line, biggest rc regret was throwing out the rc10 chassis when we got our first nitro fun model and always stuff to do, not sure if i will put on oil shocks as i love the way it handles, got at least 2 that would fit but nah unless im really bored 3 Share this post Link to post Share on other sites
Re-Bugged 10150 Posted July 24, 2020 My M05 has been servoless for a while so put one in and had a quick run on the driveway to check all’s OK, works a treat. 8 Share this post Link to post Share on other sites