alvinlwh 5895 Posted November 27, 2022 Put a 3S into the MTX-1, so much better! 5 Share this post Link to post Share on other sites
Juhunio 6830 Posted November 27, 2022 14 hours ago, ImALlama said: and now it’s much better However you got there, the final result looks absolutely amazing. That's one beautiful Ford GT 👏 1 Share this post Link to post Share on other sites
Nicadraus 6198 Posted November 27, 2022 12 hours ago, Frog Jumper said: Finished the rear wheel wells. Guess what my daughter had for lunch!?! Lol! Unfortunately, the containers don’t take paint very well. The paint on the fronts flaked off while fiddling with it. Yes I used primer, and yes I hit it with sandpaper, and yes I used soapy water prior to paint. Oh well… Also used some old brass tube to make a couple of mufflers. Hammered into shape, holes drilled and filed, black paint followed by gloss aluminum (ts17). I’ll hit it with a flame and some sandpaper once paint cures to get some patina. On a side note, RC_Persy sent me the “simple Blackfoot interior”. It’s made for the hardbody BF body, and so it needs some mods to fix my lexan. First mod was magnet mounts… It also came with two bucket seats so that is being converted to a bench seat. Paint and then some pleather to give to some snaz. Tamiya putty across the top of the dash to hide print lines. This will be sanded flat once dry. Need to find a driver figure. These seats are way to high in overall elevation so my 6” driver figure was too tall. I’ll have to find a Blazer driver figure instead, I think. Is it a CC-02? I'm curious to see how it drives with all the weight mods you put it. I'm always fascinated to see builds like this getting DIY improvements for better performance than out of the box usage. Please take videos of it. Share this post Link to post Share on other sites
Willy iine 18805 Posted November 27, 2022 For me, just final adjustments on my wash basin. I decided that the height was a tad on the short side so added the extensions. The real basin I modeled mine after has these so I guess it’s okay.. So I was going to start the Egress black today, but honestly not in the mood.. so will work on my Javelin today. 11 Share this post Link to post Share on other sites
Nicadraus 6198 Posted November 27, 2022 2 minutes ago, Willy iine said: For me, just final adjustments on my wash basin. I decided that the height was a tad on the short side so added the extensions. The real basin I modeled mine after has these so I guess it’s okay.. So I was going to start the Egress black today, but honestly not in the mood.. so will work on my Javelin today. Fantastic work as always. The details are what really gets my attention. Plus the DIYs of course. Seeing those creations is so entertaining and inspiring bro. With regards to the Egress, I'm hoping to see a similar theme to your black SA. 2 1 Share this post Link to post Share on other sites
Willy iine 18805 Posted November 27, 2022 2 hours ago, Nicadraus said: Fantastic work as always. The details are what really gets my attention. Plus the DIYs of course. Seeing those creations is so entertaining and inspiring bro. With regards to the Egress, I'm hoping to see a similar theme to your black SA. Thanks! That means a lot to me. The Egress I am going to do box art mainly for identification and just showcasing it is part of my line up. However, I am working on my Javelin black version today.. 1 Share this post Link to post Share on other sites
Ferruz 11702 Posted November 27, 2022 During last week I went for the first few "white" runs of the season. I was once again reminded of how it's exactly this kind of weather/environment that made me want to get back into RC in the first place. Snow running is just SO much fun up there with sand running if you ask me, but with way less headaches as a consequence. 11 Share this post Link to post Share on other sites
ImALlama 1370 Posted November 27, 2022 The rain won’t stop pouring down so no speed runs with the grasshopper today , guess I’ll just have to throw this thing together instead . 4 Share this post Link to post Share on other sites
Willy iine 18805 Posted November 27, 2022 (edited) @Ferruz Looks like you had a great time! We had some slow a week or so, but melted away. So this is what my Javelin looks like this morning. I realized I need the CF top deck now that this car is ‘mine’ as in design. So placed order. I tried the black Turbo Optima wheels, but this car looks better with the factory silver wheels.. well, to me. I’m redoing the lettering as quite a bit cracked off after many drives. Update.. I finished the Javelin my black version. Please check out the gallery only thead if interested. TIA! Edited November 27, 2022 by Willy iine 4 Share this post Link to post Share on other sites
alvinlwh 5895 Posted November 27, 2022 Took the girl for her karate grading. She passed. Then invited her friend and his twin sisters over for a bit of Mini 4WD fun. Too many kids in a small space = bad idea! 1 Share this post Link to post Share on other sites
Sogogi 3217 Posted November 27, 2022 1 hour ago, ImALlama said: The rain won’t stop pouring down so no speed runs with the grasshopper today , guess I’ll just have to throw this thing together instead . Hahaha i did the same thing yesterday. That is why we all gotta stock up some kits for rainy days! 2 Share this post Link to post Share on other sites
Frog Jumper 3661 Posted November 27, 2022 5 hours ago, Nicadraus said: Is it a CC-02? I'm curious to see how it drives with all the weight mods you put it. I'm always fascinated to see builds like this getting DIY improvements for better performance than out of the box usage. Please take videos of it. I’ll try to get some video soon. Weather where I live it’s very nice right now. Share this post Link to post Share on other sites
Juhunio 6830 Posted November 27, 2022 5 hours ago, Willy iine said: For me, just final adjustments on my wash basin. I decided that the height was a tad on the short side so added the extensions. The real basin I modeled mine after has these so I guess it’s okay.. So I was going to start the Egress black today, but honestly not in the mood.. so will work on my Javelin today. Next level stuff Mr Willy, beautiful work 👏 1 Share this post Link to post Share on other sites
Juhunio 6830 Posted November 27, 2022 2 hours ago, Ferruz said: During last week I went for the first few "white" runs of the season. I was once again reminded of how it's exactly this kind of weather/environment that made me want to get back into RC in the first place. Snow running is just SO much fun up there with sand running if you ask me, but with way less headaches as a consequence. That colour scheme always looks great man, but especially good in the white stuff 👌 1 Share this post Link to post Share on other sites
Frog Jumper 3661 Posted November 27, 2022 20 hours ago, Frog Jumper said: On a side note, RC_Persy sent me the “simple Blackfoot interior”. It’s made for the hardbody BF body, and so it needs some mods to fix my lexan. First mod was magnet mounts… It also came with two bucket seats so that is being converted to a bench seat. Paint and then some pleather to give to some snaz. Tamiya putty across the top of the dash to hide print lines. This will be sanded flat once dry. Need to find a driver figure. These seats are way to high in overall elevation so my 6” driver figure was too tall. I’ll have to find a Blazer driver figure instead, I think. Finished the interior. Black felt along the top of the dash, brown felt on the floor, soft leather on the seat. Chrome Molotow pen on the steering wheel and shifter knobs. Apparently I had a spot of glue on my finger tip and touched the seat. So we now have a “coffee stain”. Fits beautifully inside the shell… 4 Share this post Link to post Share on other sites
TurnipJF 9192 Posted November 27, 2022 While I was pleased with the paint scheme and window stickers, I found the overall look of my Neo Scorcher runner shell to be a bit plain for my tastes, so this evening my wife and I decorated it with a few more stickers. In keeping with the cheap and cheerful runner shell concept, the stickers are all either freebies that came with past purchases, or leftovers from other projects. 5 Share this post Link to post Share on other sites
Nikko85 3453 Posted November 27, 2022 GF01 FJ45 vs QD FJ45! Sorted out body heights and springs for both. Need to 3D print the mount for the QD, at the moment the front is resting on a drill bit to determine the correct height (it is 7mm if you are remotely interested..😀) It is Interesting to compare the trucks. They have almost the same wheelbase and track width due to the GF01 rear arm flip and QD hex mod legenthing the former and widening the later. The GF01 is 2.25 kg whilst the QD is 1.7 kg so a large weight difference. The GF01 has independent suspension whilst the QD is solid front and rear axle so a true monster truck but only RWD. Normally the GF01 would smoke a QD on performance but this QD is running a brushless combo so has a great top speed, and the widened track width means it won't topple. However the GF01 has lovely 4WD and much more capable in the rough. @wolfdogstinkus don't worry keeping some QDs...😀 4 Share this post Link to post Share on other sites
Re-Bugged 10147 Posted November 27, 2022 5 hours ago, Willy iine said: However, I am working on my Javelin black version today.. I thought that was a Javelin Black cage in the postman thread 👍🏻 I’ve got a ‘Notify me’ alert with an Aussie shop for one, good know it looks the business. There was a Red version to a while that looked great as well, but doesn’t seem to be available anymore unfortunately. Amazing job on the sink to by the way, not bad at all for an old shaky half blind fella 😉. Very inspirational my friend. 1 Share this post Link to post Share on other sites
Willy iine 18805 Posted November 27, 2022 14 minutes ago, Re-Bugged said: I thought that was a Javelin Black cage in the postman thread 👍🏻 I’ve got a ‘Notify me’ alert with an Aussie shop for one, good know it looks the business. There was a Red version to a while that looked great as well, but doesn’t seem to be available anymore unfortunately. Amazing job on the sink to by the way, not bad at all for an old shaky half blind fella 😉. Very inspirational my friend. Haha! Thanks. Yeah, good eye on the postman thread. The black cage (to me) looks the part, I was always kinda nnnnn... about the orange. I think red cage would look real good too, but the dampers are red so I decided to go with black. I think I'll get some cage net and place on the sides of the cockpit down the road. I think that and the upper CF deck I ordered will tighten it down nicely. 1 Share this post Link to post Share on other sites
Sogogi 3217 Posted November 28, 2022 Hornet is done! Except the driver figure. (Need to get some paints..) Cannot wait to run it! 8 Share this post Link to post Share on other sites
Re-Bugged 10147 Posted November 28, 2022 Sounds like you and your Javelin are good friends now @Willy iine after a slightly rocky start 😄 The Black definitely sits in your RC Shop theme very nicely. Just had a quick Google and looks like PJ have the Red in stock….so now I need 2 more Javelins…obviously. Decisions decisions…. 1 Share this post Link to post Share on other sites
ImALlama 1370 Posted November 28, 2022 It’s almost done, wanted to use brushless stuff I have laying around so I ended up putting in an eco power 13.5t, simply because it required the least amount of effort to make it fit . My esc options though aren’t really great, I don’t want to use the nicer ones because they are for other projects and my extras will probably melt, except one that is huge and I’d have to resolder the battery connector to get it through the hole into the battery area, and I’m too lazy for that, so off I go to by another esc Even though everyone’s seen a xv01 a million times here’s another one because why not 2 Share this post Link to post Share on other sites
Sogogi 3217 Posted November 28, 2022 13 minutes ago, ImALlama said: It’s almost done, wanted to use brushless stuff I have laying around so I ended up putting in an eco power 13.5t, simply because it required the least amount of effort to make it fit . My esc options though aren’t really great, I don’t want to use the nicer ones because they are for other projects and my extras will probably melt, except one that is huge and I’d have to resolder the battery connector to get it through the hole into the battery area, and I’m too lazy for that, so off I go to by another esc Even though everyone’s seen a xv01 a million times here’s another one because why not Whoa nice! Also what is that grasshopper with giant tires?! 1 Share this post Link to post Share on other sites
ImALlama 1370 Posted November 28, 2022 6 minutes ago, Sogogi said: Whoa nice! Also what is that grasshopper with giant tires?! It’s my speed run grasshopper, trying to get to 50mph, there’s some vids of it in 2 Share this post Link to post Share on other sites
Sogogi 3217 Posted November 28, 2022 5 minutes ago, ImALlama said: It’s my speed run grasshopper, trying to get to 50mph, there’s some vids of it in Omg that is insane! Share this post Link to post Share on other sites