Smirrors 186 Posted September 21, 2022 Restoring a TA03F and found some cracks in the plastic. Should still hold up I suspect but not for anything other than a light run 2 Share this post Link to post Share on other sites
berman 5319 Posted September 21, 2022 22 hours ago, Busdriver said: Yes it’s mine. When I bought mine L&L only did the blue and white livery. I found the Belga set on the bay! The stripes were included and actually contoured pretty well with a little warm persuasion. I think there maybe a couple of stickers in the L&L set that aren’t in mine but I’m quite happy with the outcome. The only downside to the shell is the front plough especially if you are going to use it as a rally car. It’s very low and if you try and cut it back too much I think it would look wrong! Oh so there is two versions? I have no idea, just got asked to paint it 😄 I doubt this one will get used to be honest. Either on display or sold to a customer more than likely. ______ Today I went back to my LHS to fix a clod buster after getting some of my parts for it out of storage. It keeps breaking, I've never seen a clod so fragile. I also picked up a faster and metal geared servo for my lunchbox and some bearings for the DT03, and installed them both. Now shopping for some dampers and maybe a cheap brushless system for the DT03, and a racing fighter body maybe. 1 Share this post Link to post Share on other sites
Busdriver 6662 Posted September 21, 2022 47 minutes ago, berman said: Oh so there is two versions? I have no idea, just got asked to paint it 😄 I doubt this one will get used to be honest. Either on display or sold to a customer more than likely. ______ Today I went back to my LHS to fix a clod buster after getting some of my parts for it out of storage. It keeps breaking, I've never seen a clod so fragile. I also picked up a faster and metal geared servo for my lunchbox and some bearings for the DT03, and installed them both. Now shopping for some dampers and maybe a cheap brushless system for the DT03, and a racing fighter body maybe. I think there’s 3 versions in TT01/2 size. Motovision , Belga and Will Gollop. They also do an M chassis version edit 4 actually, Computervision, Belga, Bastos & Will Gollop. 2 Share this post Link to post Share on other sites
pininfarina 1009 Posted September 21, 2022 decaling the tyre. almost there... 13 Share this post Link to post Share on other sites
Badcrumble 4432 Posted September 21, 2022 I saw the 1:1 at the Brooklands Museum a couple of months ago and I have to say, @pininfarina, yours is stunning. I would love to have one for the shelf but I know I couldn't reach your standard! Share this post Link to post Share on other sites
Willy iine 18843 Posted September 21, 2022 (edited) Applied some color to the box.. will mask and silver up the main pipes later. That bottom tray looks like a super market meat tray.. Could’ve saved me some time.. Update.. injected some life into this thing.. Now looks the part.. I think. Edited September 21, 2022 by Willy iine 8 3 Share this post Link to post Share on other sites
Frankster 2080 Posted September 21, 2022 Changed to a used brushless motor and ESC for my DT-02 Nissan Titan 7 Share this post Link to post Share on other sites
TurnipJF 10945 Posted September 21, 2022 Soldered some motor cables for @Juhunio: 7 1 Share this post Link to post Share on other sites
TurnipJF 10945 Posted September 21, 2022 I also reached a point where I am happy with with my Defender's marker lights and front indicators. I was not all that impressed with the stock arrangement, which consists of little domes moulded into the grille piece which you are expected to paint to represent lights. My results looked anything but convincing, so I drilled out the domes and replaced them with 5mm domed LEDs. Better, but still not all that great. Today I made up some little 1.5mm bezels for them, which I think finished them off nicely. The bezels could do with being even thinner still for scale fidelity, but with the combination of my eyesight and coordination, this is as thin as they're going to get. 😁 12 Share this post Link to post Share on other sites
Juhunio 7117 Posted September 21, 2022 22 minutes ago, TurnipJF said: Soldered some motor cables for @Juhunio: Absolute legend, thank you! 2 Share this post Link to post Share on other sites
SimTechRC 147 Posted September 21, 2022 Hello! Finally, I found a little time for the hobby) My friend asked to design adapters for TA02, that would allow to use predrilled bodies from TL01, TT01, TT02 etc. The result on the photos below) Enjoy 15 Share this post Link to post Share on other sites
Superluminal 4184 Posted September 21, 2022 3 minutes ago, SimTechRC said: Hello! Finally, I found a little time for the hobby) My friend asked to model fasteners that would allow the use of new bodies from TT01 and others on older chassis, such as TA02. Actually, the photo that came out of it) That's a superb idea! Ive got several shells that ive thought about switching between chassis types but the thought of drilling extra holes in a painted body has always put me off. 3 Share this post Link to post Share on other sites
Mark_McQ 462 Posted September 21, 2022 Glued an M4 bolt into a leftover wheel hub from my TT02 kit and then designed and printed a base for it to make a stand for painting wheels. 6 Share this post Link to post Share on other sites
Willy iine 18843 Posted September 21, 2022 19 hours ago, Smirrors said: Restoring a TA03F and found some cracks in the plastic. Should still hold up I suspect but not for anything other than a light run Sorry to see.. while you get replacements, might be worth trying some CA..(?) Share this post Link to post Share on other sites
Willy iine 18843 Posted September 21, 2022 Dang, everyone is making all these awesome 3D printed parts! Nice work @SimTechRC. 3D printed parts = Professional Willy iine eyeballed with hope parts = ProfessionNO! .. 1 Share this post Link to post Share on other sites
Willy iine 18843 Posted September 21, 2022 I showed my wife a picture of my Mini with the roof box. She didn't compliment me or anything, she just said it looks like the bunny with a pancake on his head. Anyway, I hope I make @provdes proud! Thanks again for the idea. I posted more pictures in the gallery only thread. 4 Share this post Link to post Share on other sites
Frankster 2080 Posted September 21, 2022 1 hour ago, Willy iine said: I showed my wife a picture of my Mini with the roof box. She didn't compliment me or anything, she just said it looks like the bunny with a pancake on his head. Anyway, I hope I make @provdes proud! Thanks again for the idea. I posted more pictures in the gallery only thread. How does this handle? Ever give it a spin? Share this post Link to post Share on other sites
Willy iine 18843 Posted September 22, 2022 27 minutes ago, Frankster said: How does this handle? Ever give it a spin? It should drive fine as it is quite light in weight unlike metal RC roof baskets. It doesn’t feel too top heavy. I would say no different than a 1:1 car with roof box..(?) Share this post Link to post Share on other sites
GeeWings 2861 Posted September 22, 2022 No RC for me today. In fact the next few days will be juggling work, kids (they are on school holiday), puppy (still not getting the toilet training ) and setting up my new home network. I’m hoping this resolved our Wi-Fi issues once and for all! I did also order a lot of RC supplies (including 20 cans of spray paint) so that I don’t get held up again. Should now have everything I need to finish my Honda City Turbo, Wild Willy GF01 and Comical Hornet. Still need to decide what I’m doing with the body of my Hotshot/supershot build. I think I might go all black or maybe black and some 80’s neon nonsense! 5 Share this post Link to post Share on other sites
Smirrors 186 Posted September 22, 2022 This was a used TA03F i boughed used and dirty a few weeks back. Finally got it cleaned and back together last night. Decided that since she had copped abuse from her last owner that she should get a nice gifts to compensate, a fresh set of TA03 Super Low Friction Dampers (New old stock) and some fresh shoes. 8 Share this post Link to post Share on other sites
Honza 1308 Posted September 22, 2022 Tested my TL-02 (mid motored MF-01X) today. It doesn't look like it, but it was a success 😁 3 Share this post Link to post Share on other sites
toyolien 6639 Posted September 22, 2022 24 minutes ago, Honza said: Tested my TL-02 (mid motored MF-01X) today. It doesn't look like it, but it was a success 😁 That's how all the 3d printed parts I've ever used have ended up looking.... Share this post Link to post Share on other sites
Honza 1308 Posted September 22, 2022 14 minutes ago, toyolien said: That's how all the 3d printed parts I've ever used have ended up looking.... The arm was printed more than a year ago and survived several crashes. I guess that PLA became more brittle over time. It's been also printed with thin walls and little infill. Anyway, it's better to break the arm than its mounting. Share this post Link to post Share on other sites
Frankster 2080 Posted September 22, 2022 Picked up a used Mini Monte Carlo a while ago. Getting around to adding bearings which was not installed. A pain taking apart the two M-05 chassis halves to swap out nylon for metal ball bearings. Wish it was easier like the buggies with a transmission subframe in the DF-02 5 Share this post Link to post Share on other sites
Willy iine 18843 Posted September 22, 2022 @Frankster For some reason I thought you got the M01 Monte Carlo. GL with the painting and a bunch of decals! It’s a fun car for sure. Share this post Link to post Share on other sites
