F2 Stu 39 Posted January 26, 2013 From Austria: ' really happy with it, not got the heart to run it though! 1 Share this post Link to post Share on other sites
Madmuz77 19 Posted January 27, 2013 Not today but on Friday my postie brought me this Madcap First thing I did was put in a Batt & take it for a lap of the backyard, it ran just fine. Not long after it looked like this Now I'm playing the waiting game for parts. 1 Share this post Link to post Share on other sites
matman 1499 Posted January 27, 2013 Not today but on Friday my postie brought me this Madcap First thing I did was put in a Batt & take it for a lap of the backyard, it ran just fine. Not long after it looked like this Now I'm playing the waiting game for parts. Gee , the last pic is bad , your driving is bad .... OH!! Sorry you pulled it apart , It was not your driving . Share this post Link to post Share on other sites
BigSteve 149 Posted January 28, 2013 A vintage Frog in considerably good condition for its age. It came with a second shell and wing unpainted and a new set of deals. A nice little project to get underway, the only issue is keep it original or totally modernize it original????. Steve. Share this post Link to post Share on other sites
mr crispy 2293 Posted January 29, 2013 24 rubber shielded bearings, most of which will be going into my Blackfoot 3 build. Share this post Link to post Share on other sites
Percymon 2184 Posted January 29, 2013 TRG body for F103 Shimizu rubber tyres for F103 Tamiya F103 spoke wheel set 18 bearings for wheelie camper van, but no camper Share this post Link to post Share on other sites
djmcnz 754 Posted January 29, 2013 A stupid piece of paper telling me to visit the post office after 1pm tomorrow... grrr. And I was working from home today! Just stepped out to get some lunch - they were watching me. Share this post Link to post Share on other sites
HomerJHandley 6 Posted January 29, 2013 A stupid piece of paper telling me to visit the post office after 1pm tomorrow... grrr. And I was working from home today! Just stepped out to get some lunch - they were watching me. waiting for one of them today, nothing..... it wil arrive tomorrow when i am out and about no doubt. Share this post Link to post Share on other sites
henrikw 0 Posted January 29, 2013 Finally my turn to get a really really sweet deal, thanks Lasse, your are the man! Today I went and got the following treats: A slightly used, but very cool F103, "piaa nakajima reynard 97d" - Will be used as my silvercan runner Underneath, something else is lurking... Something I have been wanting to get for a long time, a NIB Isuzu MU Type X: So very very cool: Oh, and from Poul_F I got these little gems for my TB02R's - thanks my friend! I'm kinda wanting to stay up very very late and build the MU... It will be build and used, I promise you that Share this post Link to post Share on other sites
Percymon 2184 Posted January 29, 2013 A stupid piece of paper telling me to visit the post office after 1pmsize=4] [/size] Lol I got a card today too, "we will re deliver tomorrow when you're out again or you can drive 35 miles to collect" Nice day for a drive then Share this post Link to post Share on other sites
matman 1499 Posted January 30, 2013 OMG!! I have finally got some post . . Toyota Toms & torque tuned X2 motors & the front high caps From jr-rc . Still waiting on my Stella order . Come on postie ...... Share this post Link to post Share on other sites
30YrsL8r 97 Posted January 30, 2013 It's not often I post in this thread but I took a small risk that paid off and I think it's worth sharing. Today I received fifty "2mm STAINLESS STEEL NUTS FOR M2 THREADED SCREWS MULTI PACKS" for £1.75, delivered, from fleabay. I needed some new nuts to replace the vintage ones in my Frankenscorcher so that they could be transferred to my Mk1 Sand Scorcher shelfer. I've read that that you can buy them in Screw Bag A for the Hornet, but I didn't need the screws and fifty nuts seemed more than I could want in the future. Once I'd bought them, however, I found some comments that cast doubt on whether they would fit in the wheel recesses. I'm pleased to report that these ones DO fit perfectly in the wheels. Share this post Link to post Share on other sites
Theibault 1535 Posted January 30, 2013 Not Tamiya related, but my painter got my racing body finished for my Schumy Cat K1. It's gorgeous and pictures do not do his work justice. Share this post Link to post Share on other sites
HomerJHandley 6 Posted January 30, 2013 My Ebay Dual Hunter, surprisingly for me managed to find a decent one that doesnt need anything doing with it (much!) http://www.tamiyaclub.com/showroom_model.asp?cid=117915&id=1470 Share this post Link to post Share on other sites
djmcnz 754 Posted January 30, 2013 I actually picked these up from the post office today, having missed them yesterday. Share this post Link to post Share on other sites
Percymon 2184 Posted January 30, 2013 Couldn't resist any longer.. Â Share this post Link to post Share on other sites
djmcnz 754 Posted January 30, 2013 Not Tamiya related, but my painter got my racing body finished for my Schumy Cat K1. It's gorgeous and pictures do not do his work justice. Sweet looking paint job! What tyres ("tires" ) are those? Edit: I have a NIB Cougar SV sitting here to build. Got it as a gift - looks sweet. 1 Share this post Link to post Share on other sites
mtbkym01 4008 Posted January 31, 2013 Vannnnnnnquish 1 Share this post Link to post Share on other sites
Theibault 1535 Posted January 31, 2013 [/size] Sweet looking paint job! What tyres ("tires" ) are those? Edit: I have a NIB Cougar SV sitting here to build. Got it as a gift - looks sweet. They are JConcepts Bar Codes in gold (clay) with JConcepte blue open foam inserts front and AKA red open foam rears. Both my tracks here are indoor clay. Share this post Link to post Share on other sites
backtomyroots 432 Posted January 31, 2013 Plastruct Diamond Plate styrene - for the Scania . So, what has the postman brought you today ? 1 Share this post Link to post Share on other sites
Percymon 2184 Posted February 1, 2013 Yesterday.. For F103 build.. FastWorx McLaren decal sheet FastWorx Pirelli PZero tyre decal sheet For another build.. (who can guess what it is ??) 53989 Centre Pulleys 18T 53988 Ball Diff Pulley 37T (x2) 54034 Carbon Reinforced Caster Blocks 53980 Dust Cover for ball adjuster Share this post Link to post Share on other sites
djmcnz 754 Posted February 1, 2013 For another build.. (who can guess what it is ??) 53989 Centre Pulleys 18T 53988 Ball Diff Pulley 37T (x2) 54034 Carbon Reinforced Caster Blocks 53980 Dust Cover for ball adjuster I think I can guess... why the need for new centre pulleys? Share this post Link to post Share on other sites
Percymon 2184 Posted February 1, 2013 I think I can guess... why the need for new centre pulleys? Easy answer - the chassis only arrived this morning, no idea what it would be like but for the cost it would be daft no to change all pulleys Share this post Link to post Share on other sites
djmcnz 754 Posted February 1, 2013 Easy answer - the chassis only arrived this morning, no idea what it would be like but for the cost it would be daft to change all pulleys "Not to"? Share this post Link to post Share on other sites
Percymon 2184 Posted February 1, 2013 "Not to"? Aye - corrected ! Share this post Link to post Share on other sites