Jump to content
backtomyroots

The "Postman Brought Me" Thread

Recommended Posts

Had these Countach wheels & tyres turn up this morning which I'm hoping to use on a VW Type 2 custom chassis build, they are the nearest thing I could find to the Porsche 'Teledial' style wheels so they will do the job nicely!

24906477917_7b5306bc81_b.jpg

 

  • Like 4

Share this post


Link to post
Share on other sites

Firedragon body in sad state, some old but decent thundershot wheels and tires and 2 Thundershot chassis (another on backorder) 

Just need a Thunderdragon to complete my 4WD from this set, know anyone?

In all seriousness can you get an after market Thunder dragon body and decals? if so anyone got a link?

Share this post


Link to post
Share on other sites
1 hour ago, Baddon said:

Firedragon body in sad state, some old but decent thundershot wheels and tires and 2 Thundershot chassis (another on backorder) 

Just need a Thunderdragon to complete my 4WD from this set, know anyone?

In all seriousness can you get an after market Thunder dragon body and decals? if so anyone got a link?

It would be great to get a complete set. Are they all going to be runners? I'd love a set of TS chassis as shelfers but it's been hard making a vintage TD shelf queen. Have you got a Dash 1 body (same chassis as Thundershot)? If not the same seller has these as well usually. If you do a search on eBay for TBG Thunder Dragon you should find an aftermarket TD body. 

  • Like 1

Share this post


Link to post
Share on other sites

I was very fortunate to sell more unwanted crap on ebay recently so yet again I've had disposable RC income! I ended up bidding on a pair of WR-02 Tractors, a Farm King and a Tumbling Bull. The shells need work but they were mechanically sound (one of them is actually completely new and unbuilt still) and came with all the electronics and 2x flysky controllers, Turnigy 6000mah batteries, charger and a few other things plus it came delivered in a massive one of those "really useful boxes" that must have cost 20 quid alone. I ended up winning it for £115. Seemed like a good deal to me. Plenty to work on and enjoy for the money. I might use one chassis for both the tractor shells and the other one I might get another pair of small wheels and get a VW camper body or Jimny or something. 

A friend in Singapore was also kind enough to send me a body shell for a Nikko "Nutty Hawk" I've always wanted one of these because I really like the cockpit and driver figure. I already have a couple of vehicles on the same chassis (basically a bulked up Nikko Dictator twin motor 4x4) so I can just swap it out as and when I please. It will look great on my twin brushless one down the beach!


Not my photo but it's the same as this:
nsWK1xn.jpg

Share this post


Link to post
Share on other sites
2 hours ago, Baddon said:

Firedragon body in sad state, some old but decent thundershot wheels and tires and 2 Thundershot chassis (another on backorder) 

Just need a Thunderdragon to complete my 4WD from this set, know anyone?

In all seriousness can you get an after market Thunder dragon body and decals? if so anyone got a link?

If you need a Firedragon decal sheet I have 1 spare - vintage, not re-re.

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, mman2005 said:

It would be great to get a complete set. Are they all going to be runners? I'd love a set of TS chassis as shelfers but it's been hard making a vintage TD shelf queen. Have you got a Dash 1 body (same chassis as Thundershot)? If not the same seller has these as well usually. If you do a search on eBay for TBG Thunder Dragon you should find an aftermarket TD body. 

They will be shelf runners, not looking for pristine, compared to my original Thundershot they will look like new pins. The Firedragon came up ok with a baby wipe and a model knife to remove all the lifting edges on the decals. Dash 1, no its not on my to do list. With 5 runners in the family, one each as well as the TS range and my old Pumpkin and Boomerang I think thats not a bad start from 3 months ago when it was not in my head at all.

The chassis its on-another Ebay find. It needs a Chassis as its got more holes than I do..(got it) a Prop shaft (on order) and a front bumper, **** as I missed it needed one. Not sure if it started as a Fire Dragon and had the upper suspension arms up-rated ( there is another mangled front gearbox with them on) to adjustable as the other Terra Scorcher parts (front UJ and rear body mount) are not there. At least it been ballraced.

That will give me three of the four to add to my Thundershot - due for a total rebuild and clean and a  chassis replacement and a Gumtree find of a Terra Scorcher in really decent running condition, just needs a Chassis and A5

 

Ta for link. OUCH on price esp as its no decals.

Firedragon shell.jpeg

1.jpeg

Thunshot Whatsapp.jpeg

  • Like 1

Share this post


Link to post
Share on other sites
3 minutes ago, Baddon said:

They will be shelf runners, not looking for pristine, compared to my original Thundershot they will look like new pins. The Firedragon came up ok with a baby wipe and a model knife to remove all the lifting edges on the decals. Dash 1, no its not on my to do list. With 5 runners in the family, one each as well as the TS range and my old Pumpkin and Boomerang I think thats not a bad start from 3 months ago when it was not in my head at all.

 

Ta for link. OUCH on price esp as its no decals.

Yeah postage kills it a bit. Sometimes they do discounts but you'd just have to keep an eye out. Other than that a used shell is going to be your best bet to keep costs down but they don't come up very often

Share this post


Link to post
Share on other sites
10 minutes ago, mman2005 said:

Yeah postage kills it a bit. Sometimes they do discounts but you'd just have to keep an eye out. Other than that a used shell is going to be your best bet to keep costs down but they don't come up very often

Or a collective order if others were also looking something. easier to split postage when local.

Share this post


Link to post
Share on other sites
9 minutes ago, Baddon said:

Or a collective order if others were also looking something. easier to split postage when local.

Afraid I'm not local but I'm sure someone might join you. 

Share this post


Link to post
Share on other sites

More good stuff:

Impreza 1997 stickers
Focus 1999 body set
Focus 2003 body
Volvo 850 body set
BMW M3 body set
Yokomo AE86 buckets 

goodies-jan05-18.jpg

Escort WRC body and wing
Part king cab stickers, seller sent me some bonus Auto Tech ones too, result!

From Papa Rheinard (Marc's dad!):

Castrol Celica body set
Taisan 911 body set
911 GT2 body set
190E stickers
C-Class Promarkt stickers
Escort Tiger Stripe stickers
Escort Pilot stickers
Auto Tech M3 stickers

goodies-jan19-18.jpg

  • Like 4

Share this post


Link to post
Share on other sites
14 hours ago, bjorklo said:

Got some nice parts from china

E57819B4-5E11-4081-A545-7E430EAE2372_zps

Is that a TA01 Chassis? 

Share this post


Link to post
Share on other sites
41 minutes ago, Jason1145 said:

Is that a TA01 Chassis? 

Jupp, that is correct

Share this post


Link to post
Share on other sites

Not Tamiya but I couldn't resist.  Have read too many good reviews,   plus I worked about two years at a Land Rover dealership shop.

20180120_223007.jpg

  • Like 3

Share this post


Link to post
Share on other sites
18 hours ago, bjorklo said:

Jupp, that is correct

I haven’t seen a red TA01 chassis, looks nice, could you tell me where you got it from please?

Share this post


Link to post
Share on other sites

have been looking for 1 of these for years with no luck and all of a sudden one pops up 10K down the road from me, stoked to finally get this after all these years, the problem now is that I don't know if I want to build it, may need to look for a runner now.

 

 

 

IMG_3156.jpg.a5bbd18edc796ed87d965126e8806a7f.jpgIMG_3157.jpg.bdb5845314018c8821e9ed51396fc17b.jpgIMG_3158.jpg.28151aca2c91c972fb23d5134845804f.jpg

  • Like 4

Share this post


Link to post
Share on other sites

Another day another delivery! First off an original Blackfoot F150 complete with the front grill, tailgate & XLT Ranger clear glass front screen! It also came with a load of chassis parts & a few bits for the Monster Beetle including an original driver, possibly my best bargain find ever at £20! :o

25963477638_8eda4cefc4_b.jpg

this was swiftly followed up by the mandatory 'basket case' buy, a WW2 body that looks like a lump of Emental with the amount of holes it has in it! The idea was to cut this up for parts on another WW2 project (without the guilt of destroying a new shell), considering what a bodge this is the OO has used the worlds strongest glue so l'll have to dremel out the inner front wings, tailgate, & front grill!

39836572951_71bdb9237a_b.jpg38937822005_72f37d18dd_b.jpg

 

 

Share this post


Link to post
Share on other sites
23 minutes ago, max69vk said:

Another day another delivery! First off an original Blackfoot F150 complete with the front grill, tailgate & XLT Ranger clear glass front screen! It also came with a load of chassis parts & a few bits for the Monster Beetle including an original driver, possibly my best bargain find ever at £20! :o

25963477638_8eda4cefc4_b.jpg

this was swiftly followed up by the mandatory 'basket case' buy, a WW2 body that looks like a lump of Emental with the amount of holes it has in it! The idea was to cut this up for parts on another WW2 project (without the guilt of destroying a new shell), considering what a bodge this is the OO has used the worlds strongest glue so l'll have to dremel out the inner front wings, tailgate, & front grill!

39836572951_71bdb9237a_b.jpg38937822005_72f37d18dd_b.jpg

 

 

Don't know about your stockists, but here in the USA, I found that Jet brand DESOLVIT is a very good, but pricy glue killer. It is engineered for CA type glue, but could work on some of that stuff in there. Good luck.

Share this post


Link to post
Share on other sites

New Madbull body, madbull bearings, Thundershot bearings, body post extenders, A second hand Madbull with loads hop ups (basher for son Nr 2) New set radio gear for son Nr 2. A 3rd Thundershot chassis and a few other bits.

  • Like 2

Share this post


Link to post
Share on other sites
22 minutes ago, Crash Cramer said:

Don't know about your stockists, but here in the USA, I found that Jet brand DESOLVIT is a very good, but pricy glue killer. It is engineered for CA type glue, but could work on some of that stuff in there. Good luck.

Thanks for the info, I use their graffiti remover product for paint stripping but didn't realise they did a glue remover too 😊

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...