max69vk 708 Posted March 15, 2018 Unfortunately it's only the box, but it'll make a nice home for one of my M38's sitting on the shelf 2 Share this post Link to post Share on other sites
novicelad 787 Posted March 15, 2018 Not what the postman brought me but what I got from freecycle, this thing I think its some promo thing for call of duty black ops, its free it works and it has a camera on the front you get a feed to the remote so its good fun 2 Share this post Link to post Share on other sites
novicelad 787 Posted March 16, 2018 Another TNX body shell! this will be for the shelf got a couple of splits but good nic 3 Share this post Link to post Share on other sites
Badcrumble 4203 Posted March 16, 2018 I may not have been able to stay home and play Tamiya today but being at work meant I was here to receive a TL01LA with Spektrum 2.4Ghz radio gear! 1 Share this post Link to post Share on other sites
Granddad Stinky 975 Posted March 16, 2018 Bearings from Colin to catch up on some builds. Parts for my Lancia build. And a KamTech Sand Scorcher replica for by Basher Bug Build. 1 Share this post Link to post Share on other sites
max69vk 708 Posted March 16, 2018 Following my recent theme of buying the most atrociously abused hard bodies, I had this beauty arrived today. Looks like they tried using concrete to repair it previously! 1 Share this post Link to post Share on other sites
Juggular 4964 Posted March 16, 2018 Frog re-re decals. One for a Frog shell (that I don't have), one for DT03 (that I don't have). I don't think I've seen a barcode paper inside a sticker bag before... and the bottom is sealed at an angle. Are these genuine? Share this post Link to post Share on other sites
Crash Cramer 617 Posted March 16, 2018 I’ve seen slight angles on the bagged parts before, but not the barcode paper inserted yet, would that mean there is no barcode printed on the backside of these then? It has been sometime since I ordered parts or decals from folks other than kit breakers. 1 Share this post Link to post Share on other sites
Juggular 4964 Posted March 16, 2018 I don't think I've seen the barcode on the backside. I should check when I go home. Edit: Nope, no barcode on the backside. Share this post Link to post Share on other sites
Re-Bugged 10146 Posted March 18, 2018 On 3/17/2018 at 4:01 AM, max69vk said: Following my recent theme of buying the most atrociously abused hard bodies, I had this beauty arrived today. Looks like they tried using concrete to repair it previously! You just need a Stevie Wonder Driver in there and you're done Share this post Link to post Share on other sites
ChrisRx718 4470 Posted March 19, 2018 Thank you Banzai Hobby! Drift car motor and a crawler motor - £20ish for both, not bad I reckon! 1 Share this post Link to post Share on other sites
Yonez 180 Posted March 19, 2018 Trackstar waterproof ESC/Motor combo. ' It's sensorless, which I should have checked before buying. But it's for a basher, so not a huge deal. We'll see once it's mounted. It came with no instructions and there are no markings on the motor wires to indicate the different wires (A, B, C). Do I just plug it together and let the ESC figure out the configuration? Planning to put this in the King Yellow I'm building with the kid. It now has a Speed Passion Reventon Pro and matching very un-waterproof motor: These were put in just because the rating is pretty good to what I want and it was laying around. I shortened the servo lead for the rear servo and built a short custom Y cable. Will be interesting to see how the FlySky receiver handles these two servos. I'm thinking about adding a direct connection to the ESC/motor cable to pull power directly from the ESC. Share this post Link to post Share on other sites
JeffSpicoli 1363 Posted March 19, 2018 New Skates came in today 5 Share this post Link to post Share on other sites
Phil5556 136 Posted March 20, 2018 2 LiPos that don't quite fit in my Top Force (they will do with some velcro straps) and the ugliest transmitter ever made 1 Share this post Link to post Share on other sites
Wooders28 4723 Posted March 20, 2018 The couple of rattle tins i ordered from Otley Modelsport arrived, along with the, oh those lipos are quite cheap, and I'll need a charge sack, and oh look at those and those ..... 2 4 Share this post Link to post Share on other sites
Crash Cramer 617 Posted March 20, 2018 3 hours ago, Phil5556 said: 2 LiPos that don't quite fit in my Top Force (they will do with some velcro straps) and the ugliest transmitter ever made What is the ugliest TX ever made???? Let me see Share this post Link to post Share on other sites
Phil5556 136 Posted March 20, 2018 43 minutes ago, Crash Cramer said: What is the ugliest TX ever made???? Let me see It's pretty bad. But it does feel nicer to hold and use than the Absima I've got. Share this post Link to post Share on other sites
Crash Cramer 617 Posted March 21, 2018 1 hour ago, Phil5556 said: It's pretty bad. But it does feel nicer to hold and use than the Absima I've got. Yep that is pretty dadgum UUUUUUUUUGLY, LOL reminds me of a Cylon 1 Share this post Link to post Share on other sites
max69vk 708 Posted March 21, 2018 I promise this will be the last vintage model I buy *crosses fingers* no idea why the previous owner decided to paint the front wings black, unfortunately it's trashed the original decals & the rest around the shell are all in pretty good shape. Share this post Link to post Share on other sites
evssv69 378 Posted March 21, 2018 this beauty......unbuilt.. getting very hard to find nowadays for sensible money 7 Share this post Link to post Share on other sites
ThunderDragonCy 7878 Posted March 22, 2018 These turned up yesterday. Carbon rear shock mount for the DT03 and Rising Fighter D parts to put the kids RF back together after i nicked some bits for Project Ultra G 2 Share this post Link to post Share on other sites
Tamiyabigstuff 832 Posted March 22, 2018 Just arrived - 56357 Mercedes Benz AROCS 3348 6x4 Tipper Truck. 5 Share this post Link to post Share on other sites
topforcein 1764 Posted March 22, 2018 13 minutes ago, Tamiyabigstuff said: Just arrived - 56357 Mercedes Benz AROCS 3348 6x4 Tipper Truck. hey come on don't just put a post up like that and not give us a pic or 3 1 Share this post Link to post Share on other sites
Tamiyabigstuff 832 Posted March 22, 2018 Couple of things I've just noticed - the motor supplied in the kit is a 35T and the rear tyres are a new chunky tread pattern I've not seen on any of the other 1/14 truck kits. Tipper bed is very impressive - quite heavy 1-piece plastic moulding. Quite a lot in this kit - very impressed. Just have to talk the wife into letting me get the tipper mechanism now... 6 1 Share this post Link to post Share on other sites