Man1c M0nk3y 564 Posted January 23, 2019 5 minutes ago, Wooders28 said: The paint I should have ordered when I ordered the other paint, arrived, plus an esc for the build too! 😀 Have you used the Core-RC paints before? Any good? My girls have an idea for one of their shells but it’ll be several colours and Tamiya PS’s get expensive in comparison to the Core ones. Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted January 23, 2019 Some goods. 5 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted January 23, 2019 Doublepost Share this post Link to post Share on other sites
S-PCS 568 Posted January 23, 2019 Paint for the Zakspeed Mercedes, yet another front shock tower for my highly competitive DT-02 Nissan Titan, steel pinion, for, uh... always good to have steel pinions, and a Sport Tuned and Mini CVAs for the Jägermeister BMW, which (along with the already installed ball bearings) brings it up to the very limit of legal modifications in the local series which I'm going to run it in. 8 Share this post Link to post Share on other sites
max69vk 708 Posted January 24, 2019 Small but hard to find - Early style Clod Buster Hood intake 5 Share this post Link to post Share on other sites
Grotty Otty 868 Posted January 24, 2019 21 hours ago, Man1c M0nk3y said: Have you used the Core-RC paints before? I have a few times, they cover and last well but I find I have to do more coats than the equivalent PS spray to ensure the depth of colour. They are larger and better value however, but I think its best to go in with Tamiya PS first then back with the Core if a more custom mettalic colour. Solids seem to be on par with PS. 3 Share this post Link to post Share on other sites
Jason1145 3986 Posted January 24, 2019 21 hours ago, Man1c M0nk3y said: Have you used the Core-RC paints before? Any good? My girls have an idea for one of their shells but it’ll be several colours and Tamiya PS’s get expensive in comparison to the Core ones. Yeah I find they are good but not as good as Tamiya PS paints....my last two cans seemed to they take more coats to get the same coverage.... must be the Core paints come out thinner and recently I have had a bobble effect left on the inside, where maybe the paint hasn't set properly... let me say it didn't detract from the outside look but felt rough to the touch on the inside.. more so than from Tamiya cans. But for the price it's a trade off and I'd use them again..... more paint can get the same coverage anyway! 3 Share this post Link to post Share on other sites
Man1c M0nk3y 564 Posted January 24, 2019 @Grotty Otty @Jason1145 Thanks. Great feed back. The majority of the body will be one simple colour so maybe I’ll go Tamiya for that but then they are wanting several colours for some smaller details so I’ll give the Core paints a go on those areas. 3 Share this post Link to post Share on other sites
Klausen 1197 Posted January 24, 2019 Newbuilt TB Evo arrived today. 5 Share this post Link to post Share on other sites
Wooders28 4723 Posted January 24, 2019 On 1/23/2019 at 3:45 PM, Man1c M0nk3y said: Have you used the Core-RC paints before? Any good? My girls have an idea for one of their shells but it’ll be several colours and Tamiya PS’s get expensive in comparison to the Core ones. First time I've used them, and , seem ok! (I'm no expert painter though 😳) Core rc also do a handy spray gun, that looks to clip onto the rattle tin, don't know of anyone has used one? http://www.racing-cars.com/pp/Product_Category/Bodyshells/CR599.html 3 Share this post Link to post Share on other sites
svenb 3778 Posted January 24, 2019 2 hours ago, Klausen said: Newbuilt TB Evo arrived today. Beautiful 😉 Share this post Link to post Share on other sites
Man1c M0nk3y 564 Posted January 24, 2019 3 minutes ago, Wooders28 said: First time I've used them, and , seem ok! (I'm no expert painter though 😳) Core rc also do a handy spray gun, that looks to clip onto the rattle tin, don't know of anyone has used one? http://www.racing-cars.com/pp/Product_Category/Bodyshells/CR599.html Cheers. Is it the metallic white body you did in the other thread? Looks decent if so and whites one of the colours I’ll be using. Share this post Link to post Share on other sites
S-PCS 568 Posted January 24, 2019 As someone who owns a lot of tools, I never gave this set much thought, until a buddy lost his motor pinion at the track the other day - and everybody had screwdrivers, wrenches, pliars, cutters, files, you name it, but nobody had brought a single allen key. That's when I saw the point of this kit. My pinions are always thread-locked down, and so is his now, I guess I'll probably never need this set anyway, but hey, more tools, and there's a Tamiya logo on them! 4 Share this post Link to post Share on other sites
S-PCS 568 Posted January 24, 2019 On 1/20/2019 at 11:00 AM, Fabia130vRS said: What is the short corse truck ? For several days I believed this to be some sort of Jeopardy! reference. Share this post Link to post Share on other sites
Ray_ve 1043 Posted January 24, 2019 Today a Dual Hunter appeared. Seems in very reasonable condition, has oil shocks and two 23T motors. The wheels have ball bearings so hopefully the gearboxes too. Needs electronics (ESC is broken), steel pinions, the caps that hold the battery in place and and a cleanup. Maybe shorten the shocks a bit to give it a better stance. Should be a nice basher/lazy driver. 7 Share this post Link to post Share on other sites
evssv69 378 Posted January 25, 2019 This lovely Box is near perfect...1987 2nd one i got now......but for £12.99 I'd of been a fool not to of bought it 5 Share this post Link to post Share on other sites
Mokei Kagaku 2706 Posted January 25, 2019 6 hours ago, evssv69 said: Box is near perfect...1987 2nd one i got now......but for £12.99 I'd of been a fool not to of bought it The price is OK as it's a normal shop price, but the reason why the box is in such good condition is that it's not at all from 1987. The kit was first released in 1987, thus "Copyright 1987", but Tamiya didn't start their production in the Philippines before 1994, so this kit was manufactured there anywhere between 1994 and 2018. If it had been an early production kit from 1987, it would have been "made in Japan". That's also the reason why for instance 18001 Hotshot Jr. and 18002 Hornet Jr. with "made in Japan" on the box sell for up to 10 times the price of the same kits with "made in the Philippines" on the box. 2 Share this post Link to post Share on other sites
Wooders28 4723 Posted January 25, 2019 On 1/24/2019 at 6:36 PM, Man1c M0nk3y said: Cheers. Is it the metallic white body you did in the other thread? Looks decent if so and whites one of the colours I’ll be using. It's Core Rc - CR625 Metallic white, backed with Core Rc - CR600 White Knight. The flourescent yellow is , Tamiya - PS-27. First time I've used Core Rc paints, and I'd get more, 150ml tins, so 50% more paint and cheaper too! 1 Share this post Link to post Share on other sites
RCvet 63 Posted January 26, 2019 Finished my TT02 RR for upcoming TCS race. https://www.tamiyaclub.com/showroom_model.asp?cid=133154&id=50253 Share this post Link to post Share on other sites
Man1c M0nk3y 564 Posted January 26, 2019 6 hours ago, Wooders28 said: It's Core Rc - CR625 Metallic white, backed with Core Rc - CR600 White Knight. The flourescent yellow is , Tamiya - PS-27. First time I've used Core Rc paints, and I'd get more, 150ml tins, so 50% more paint and cheaper too! Cheers. Looks like an order is going in soon then...must resist adding bits for the Cougar at the same time, you know, to save on postage 😂 1 Share this post Link to post Share on other sites
Grotty Otty 868 Posted January 26, 2019 2 hours ago, Man1c M0nk3y said: .must resist adding bits for the Cougar at the same time, you know, to save on postage 😂 The old just spend another £60 to save £3.50 on postage... We'll it would be rude not to! 😁 1 3 Share this post Link to post Share on other sites
Man1c M0nk3y 564 Posted January 26, 2019 1 hour ago, Grotty Otty said: The old just spend another £60 to save £3.50 on postage... We'll it would be rude not to! 😁 Man maths at its finest 😂 1 1 Share this post Link to post Share on other sites
bjorklo 1620 Posted January 26, 2019 I got this from the Postman 5 Share this post Link to post Share on other sites
Superluminal 3750 Posted January 26, 2019 A two speed transmission all the way from Australia for my old 1996 Kyosho Mantis. Following the 90s touring car thread, what started out as a simple "get it out the loft and clean it up a bit" project is growing legs. Expensive legs. 1 Share this post Link to post Share on other sites
Jonathon Gillham 4606 Posted January 27, 2019 10 hours ago, Superluminal said: A two speed transmission all the way from Australia for my old 1996 Kyosho Mantis. Following the 90s touring car thread, what started out as a simple "get it out the loft and clean it up a bit" project is growing legs. Expensive legs. I have a Kyosho mantis too, mine is the EP and had the Volvo 850 body. Whats yours that had a 2 speed transmission? Share this post Link to post Share on other sites