Fabia130vRS 2098 Posted March 19, 2019 10 minutes ago, Jonathon Gillham said: The FPV setup arrived but unfortunately its not quite plug and play. The tx/rx part should be, but I need to swap plugs over to plug the camera in. Its got those tiny JST plugs so I'm going to try to find an adaptor rather than attempt tomput new plugs on, theynlook too small and fiddly. Unless I ask my frind to do it... Mine came with a adapter from te cameras tiny flat connector I dont know the name to a micro 2.0 plug, I use on these and mini quad only. I told you the TX02 from eachine is a plug to power source ready device with VTX included 1 Share this post Link to post Share on other sites
Futura 199 Posted March 19, 2019 Some tyres for my Street/Sand Rover. 2 Share this post Link to post Share on other sites
nellyle 382 Posted March 19, 2019 New radio set up 1 Share this post Link to post Share on other sites
svenb 3778 Posted March 19, 2019 Wow! Seriously green😬 3 Share this post Link to post Share on other sites
Blista 1519 Posted March 19, 2019 A few last tuning bits for a CC01 arrived today. Thought I'd try out a set of F350 wheels since I couldn't find a cheap set of beadlocks that I liked. Also ordered the Unimog 406 kit. I was hoping to buy a CC01 kit locally to build it this weekend. Unfortunately there either wasn't a kit I liked or they'd need me to order extra bits to fit the Bronco body anyway. Almost went for a CR01 but my car battery died last night and I think the alternator might be to blame so I decided to be sensible. 3 Share this post Link to post Share on other sites
Jonathon Gillham 4606 Posted March 20, 2019 8 hours ago, Jason1145 said: Ask you "frind", I'm sure he'll help ;p Don't you have a frind like this? I did ask and will be going over on the weekend. I'm also going to take my new ESC for him to fix up my awful soldering job, hehe, he has no idea. 1 Share this post Link to post Share on other sites
Jonathon Gillham 4606 Posted March 20, 2019 8 hours ago, Fabia130vRS said: Mine came with a adapter from te cameras tiny flat connector I dont know the name to a micro 2.0 plug, I use on these and mini quad only. I told you the TX02 from eachine is a plug to power source ready device with VTX included Micro 2.0 plug, good to know. It looks like a small balance plug from a lipo, but really really small. To make matters worse the one the camera takes is small but the one from the tx is tiny. I think they are the same plugs though, just different size. Oh and the +, - and signal in different order which is awesome. I can bodge it for now, I have servo plugs which I could make work but the wires are so small I don't want to do that then get a proper fix on the weekend and risk losing too much wire length 1 Share this post Link to post Share on other sites
bjorklo 1620 Posted March 20, 2019 More parts for my favorite chassis, avante family and Top-Force 2 Share this post Link to post Share on other sites
Tizer 606 Posted March 20, 2019 Postman brought me this a couple of days ago. Most of my auction wins from Japan from November and December. Some stuff I had already for a while because I used a faster shipping method, and the same goes for the stuff I won in January/February. Now there's still some other stuff waiting in Japan for me to ship it back here 5 Share this post Link to post Share on other sites
svenb 3778 Posted March 20, 2019 25 minutes ago, Tizer said: Postman brought me this a couple of days ago. Most of my auction wins from Japan from November and December. Some stuff I had already for a while because I used a faster shipping method, and the same goes for the stuff I won in January/February. Now there's still some other stuff waiting in Japan for me to ship it back here Nice haul👍 I spy some blue ta04 bits, but I can't quite see which evo the clear chassis parts are🤔 TB evo IV!? Share this post Link to post Share on other sites
Tizer 606 Posted March 20, 2019 Just now, svenb said: Nice haul👍 I spy some blue ta04 bits, but I can't quite see which evo the clear chassis parts are🤔 TB evo IV!? TB evo 4, yes. For a very special project! They also had the smoke clear parts, but I forgot about the auction and was too late Share this post Link to post Share on other sites
svenb 3778 Posted March 20, 2019 4 minutes ago, Tizer said: TB evo 4, yes. For a very special project! They also had the smoke clear parts, but I forgot about the auction and was too late I've got a evo 4 ms nib with all hop ups waiting for rainy day. Got the blue and red clear parts but would like the smoke😁 Share this post Link to post Share on other sites
svenb 3778 Posted March 20, 2019 1 hour ago, Tizer said: Red clear?! Yeah, more pink really, I'll take a picture later Share this post Link to post Share on other sites
evssv69 378 Posted March 20, 2019 these thks to mr grumpy... and my goo.. and 2x more tings but there in work still..... 2 Share this post Link to post Share on other sites
svenb 3778 Posted March 20, 2019 9 hours ago, Tizer said: Red clear?! @Tizer Share this post Link to post Share on other sites
Tizer 606 Posted March 21, 2019 9 hours ago, svenb said: @Tizer Wow!! That's absolutely amazing! Never seen that before. Now I need to go back on the hunt again I guess Share this post Link to post Share on other sites
evssv69 378 Posted March 21, 2019 ..sumin I'd never thought I'd own.......pretty much perfect in every way Bought for sensible money from the uk.....and it came with this... I now have 4 willys i thk............and this bueaty.... 2 Share this post Link to post Share on other sites
Rb4276 803 Posted March 21, 2019 My egress came today, wont build it for a week or two though 4 Share this post Link to post Share on other sites
nellyle 382 Posted March 21, 2019 9 minutes ago, Rb4276 said: My egress came today, wont build it for a week or two though You'll love it, enjoying building mine so far, big push this weekend to finish it! 1 Share this post Link to post Share on other sites
Rb4276 803 Posted March 21, 2019 4 minutes ago, nellyle said: You'll love it, enjoying building mine so far, big push this weekend to finish it! Im looking forward to it, i had an avante as a kid and to be honest it was flimsy and fell apart. I couldnt complain ingot it new for $99 on clearance. I figured the egress is better, improved and wanted one when i saw the egress as a kid. Ill build it one weekend coming up. I have everything already, going to put a 13.5 brushless in it to start Share this post Link to post Share on other sites
Britaff 28 Posted March 21, 2019 My Modelsport order arrived today 8 Share this post Link to post Share on other sites
Truck Norris 2237 Posted March 21, 2019 A few bits this week. Bodies are another Impreza 08 and another Clio. Pin Vise with 1mm and 0.5mm bits. The small Ersatzteille pack is a couple of 4x5mm flanged tubes - the last pieces in the puzzle for my TA-02W build. Batteries were a Tamico freebie. 6 Share this post Link to post Share on other sites
topforcein 1764 Posted March 22, 2019 11 hours ago, Truck Norris said: A few bits this week. Bodies are another Impreza 08 and another Clio. Pin Vise with 1mm and 0.5mm bits. The small Ersatzteille pack is a couple of 4x5mm flanged tubes - the last pieces in the puzzle for my TA-02W build. Batteries were a Tamico freebie. what do you do with all this stuff you buy esp the shells do you buy them to sell or are they for customers Share this post Link to post Share on other sites
Zxkuqyb 159 Posted March 22, 2019 15 hours ago, Britaff said: My Modelsport order arrived today Ooooo, I didn't know that Volvo was available yet....must check the store, thanks! Share this post Link to post Share on other sites