Peter_B 997 Posted June 2, 2019 2 minutes ago, ThunderDragonCy said: Let me know how that goes. Would be good to have an option. Will do. At first glance it looks promising. I'm hoping the female connector will mesh nicely with the SP motors. If it does then I'm hoping I can solder the male connectors to the tabs on my non-SP motors so I can swap motors without having to resolder. 1 Share this post Link to post Share on other sites
max69vk 708 Posted June 3, 2019 Lots more colourful WR02 parts, I’m a bit surprised that the main chassis & chassis parts are 2 different shades of red though 3 Share this post Link to post Share on other sites
Juggernut 120 Posted June 3, 2019 Been out of the hobby for a bit (life) but trying to claw my way back in with a new Craigslist find: And a bonus Terra Crusher roller: All for $165 which I think was a good deal. My first nitro. Engine looks clean as a whistle as far as I can tell. Can't get the head off though and really don't want to damage the screws. Will be starting a thread in the "Builds" section to get some tips/advice. 4 Share this post Link to post Share on other sites
tamiya_1971 615 Posted June 4, 2019 Would have never bought a Mad Bull, but a 30 dollar ebay find seemed reasonable. Just needs new paint, bearings and one battery stay (A parts tree) which is discontinued AND is insanely overpriced on ebay. I'll rig something up I guess . 1 Share this post Link to post Share on other sites
LeftyAl 164 Posted June 4, 2019 Got a 2nd hard Ferrari F1 312T3 body delivered today. Didn't realise that there were multiple versions of this car. The body I got was for the 58011 model when I really wanted the 49191 version But it will not go to waste, will work out a way to mount it on a shelf queen chassis. It had a low starting bid and I was the only bidder, so no real harm done at the end of the day...Hopefully I wont start looking for a 58011 chassis to fit it. Share this post Link to post Share on other sites
JennyMo 3526 Posted June 4, 2019 More nerdy bits of metal arrived for my 2WD step-side build this weekend: Time to break out the spanners again! Jenny x 5 Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted June 5, 2019 The last of the electronics, some thermometers with remote sensors, showed up today for my TT02 speed run car. The game plan: The LiPo will pass through a Lemonhobby 180A power analyzer and capture minimum voltage, maximum current, maximum power, and energy consumed for the system. After the power analyzer, power will split between the ESC and a 6V/3A BEC. The BEC will feed a 20A power analyzer to capture minimum voltage and maximum current of the downstream receiver, gyro, and servo. I'll remove the BEC power wire from the ESC and just have signal and ground running to the radio receiver so it doesn't conflict with the external BEC. The ESC BEC will probably power the motor cooling fan. The ESC will have its phases and sensor wire connected to the motor. Three thermometers will measure battery, ESC, and motor temperatures. The GPS will capture top speed. Hopefully I'll get some interesting data. It's going to take some creative packaging to make it all fit. 4 Share this post Link to post Share on other sites
J@mes 2326 Posted June 5, 2019 Some parts arrived. Fun fitting them tonight & Thursday. Front tonight, back tomorrow. 1 Share this post Link to post Share on other sites
Grotty Otty 868 Posted June 6, 2019 Cougar arrived in under 24 hours from Modelsport.co.uk. Had been weighing up a Top Cat just for the inboard shocks but these are now only £20 more expensive.. Interested to see how the motor positions effect the handling plus being the genius I am I'll be using it on grass and dirt and not what it was designed for. 😏 7 Share this post Link to post Share on other sites
J@mes 2326 Posted June 6, 2019 CW01 build done. I fitted the diff lock & trans brace this morning and had a little test drive indoors. It’s bonkers, somehow did a backflip off the fish tank cabinet & landed on its wheels. Looking forward to an out doors run so I can fine-tune the steering etc. 2 Share this post Link to post Share on other sites
JennyMo 3526 Posted June 6, 2019 By golly goodness! - what have we here? Jx 4 Share this post Link to post Share on other sites
Badcrumble 4203 Posted June 7, 2019 My Turnigy 6 channel tx / rx (rebadged Flysky GT5) plus two extra rx arrived today. Very impressed after watching a few You Tube videos and reading the manual. It seems far easier to customise settings than on my Tamco stick controller (for which you can no longer buy rx easily). I can see this becoming my default radio set for 'my' cars. Share this post Link to post Share on other sites
Man1c M0nk3y 564 Posted June 7, 2019 On 6/6/2019 at 7:22 AM, Grotty Otty said: Cougar arrived in under 24 hours from Modelsport.co.uk. Had been weighing up a Top Cat just for the inboard shocks but these are now only £20 more expensive.. Interested to see how the motor positions effect the handling plus being the genius I am I'll be using it on grass and dirt and not what it was designed for. 😏 Lovely although I am biased based on having its dirt loving brother! They go together beautifully. Well, at least the stage I’ve got to before putting it away to work on the house. Must get it back out. You building stock or have any alloy goodies made it into the purchase/build?! 1 Share this post Link to post Share on other sites
Grotty Otty 868 Posted June 7, 2019 1 hour ago, Man1c M0nk3y said: Lovely although I am biased based on having its dirt loving brother! They go together beautifully. Well, at least the stage I’ve got to before putting it away to work on the house. Must get it back out. You building stock or have any alloy goodies made it into the purchase/build?! All stock with a basic Radient Reaktor brushless set up. After much deliberation on whether to get a Top Cat (or an Astute or XV-01) I was intrigued by the multiple motor positions and their effect on handling. Should be somewhat different to my DT-03! The Modelsport.co.uk sale price was to good to miss plus you're right we you say they go together beautifully, except the Cat XLS... That's a whole different rewarding challenge! 1 Share this post Link to post Share on other sites
jupitertwo 1484 Posted June 7, 2019 Exciting! Super speedy Modelsport delivery, body trimmed already for painting tomorrow i was tempted to go a ‘black special’ route, but for now she’s going to be built pretty much stock and box art 9 Share this post Link to post Share on other sites
Truck Norris 2237 Posted June 8, 2019 A couple more bodies ticked off the wants list - red header card body is the Calsonic Primera, on the right is the Lancer Evo IV. 5 Share this post Link to post Share on other sites
Rb4276 803 Posted June 8, 2019 New motor for my egress 2 Share this post Link to post Share on other sites
topforcein 1764 Posted June 9, 2019 On 6/8/2019 at 10:39 AM, Truck Norris said: A couple more bodies ticked off the wants list - red header card body is the Calsonic Primera, on the right is the Lancer Evo IV. the castrol pure racing livery has to be one of my fav's and it looks great on the skyline shell aswell Share this post Link to post Share on other sites
Ray_ve 1043 Posted June 9, 2019 A metal servo saver arm I need for the M-05 chassis. But apart from that, nothing else has come in for weeks! Very annoying, this way I cannot get anything done.... My chinese friends are really dissapointing lately. Share this post Link to post Share on other sites
Peter_B 997 Posted June 9, 2019 Yesterday the postman brought me a few stainless M3 screws and a rare, new in pack, rear shock and wing mount for my Procat. Share this post Link to post Share on other sites
Grotty Otty 868 Posted June 10, 2019 A new Shorty lipo to replace the scarily bulged one that is now residing in the BBQ with the lid down! I'll get it in a Lipo sack and get to a recycling centre this week... Share this post Link to post Share on other sites
Badcrumble 4203 Posted June 10, 2019 TCPhotos is down at the moment so no pics but a speedy delivery from Modelsport of 2x servo, dual motor Hobbywing ESC and paint for my Agrios build plus rally blocks for my RS200. Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted June 10, 2019 I liked my 3Racing M4 Sport chassis so much the postman brought me another one today... 2 Share this post Link to post Share on other sites
Rb4276 803 Posted June 11, 2019 Got a protek servo to go into my egress Share this post Link to post Share on other sites