Kitzbuehel74 146 Posted June 1, 2020 After 6 weeks, Blackfoot wheels arrived from California. Can finally get this one done ☺️ 2 Share this post Link to post Share on other sites
Fruitfly01 596 Posted June 1, 2020 Just some 4mm adjusters Share this post Link to post Share on other sites
Mark_C 198 Posted June 1, 2020 Drive pins for the wheels - replacement for the TL-01 that lost one a week or so ago Gearbox shaft for the CW-01 which was missing when I got it 850 bearing for the CW-01, someone had replaced all the 1150s but left this one Paint remover - hopefully enough to get the pumpkin body stripped Still to come: Paint for pumpkin & monster beetle TA05IFS TA03F Gearbox housings for CW-01 Rollbar for pumpkin Chrome & glass pieces for CW-01s I think I need to keep off ebay Share this post Link to post Share on other sites
catman79 346 Posted June 1, 2020 A large pile of yokomo parts, my yz10 restoration can almost begin! 2 Share this post Link to post Share on other sites
Finnsllc 917 Posted June 1, 2020 It was a big delivery week!! Big ticket items : DARK IMPACT, F103GT GAZOO. waiting on DURGA DB--01 and DN-01 ZAHHAK. Also arrived: BALDRE BODY SET, front and rear PINK DISH WHEELS, 2 5600 2s LIPOS, SPUR GEARS, 9 cans of PS and RIT PINK DYE Over the last month also received ; DURGA BODY KIT,SUPER ASTUTE BODIES, waiting on TOP FORCE BODY KIT, ALUMINUM M-06 bling and im afraid to look at what is on the invoices on a few sites 3 Share this post Link to post Share on other sites
Juhunio 6830 Posted June 2, 2020 An impulse buy...I categorically do not need it yet as I have a few other builds ready to go but I just kept seeing stock disappearing everywhere and then when this one was reduced...well, I couldn't resist. As someone else on here wisely said "buy now, ask questions later" Still factory sealed, couldn't resist having a little peak inside. Man, it looks NICE in there 10 Share this post Link to post Share on other sites
futureworks 864 Posted June 2, 2020 More mint motors (if you'll excuse the alliteration) 4 Share this post Link to post Share on other sites
svenb 3778 Posted June 2, 2020 20 minutes ago, futureworks said: More mint motors (if you'll excuse the alliteration) Are you a Tamiya motor breeder😅 Share this post Link to post Share on other sites
futureworks 864 Posted June 2, 2020 7 minutes ago, svenb said: Are you a Tamiya motor breeder😅 It’s certainty beginning to look that way, 😀😀😀 2 Share this post Link to post Share on other sites
svenb 3778 Posted June 2, 2020 48 minutes ago, futureworks said: It’s certainty beginning to look that way, 😀😀😀 Let me know if you manage to rear a Transpeed 9T😉 1 Share this post Link to post Share on other sites
TurnipJF 9192 Posted June 3, 2020 Some blue bits for a forthcoming M-08 build: 4 Share this post Link to post Share on other sites
SupraChrgd82 1425 Posted June 3, 2020 14 minutes ago, TurnipJF said: Some blue bits for a forthcoming M-08 build: I’m anxious to see this build! The M08 is sexy! 1 Share this post Link to post Share on other sites
Finnsllc 917 Posted June 3, 2020 Funny, got an email from DHL. No idea whats coming......... Share this post Link to post Share on other sites
SupraChrgd82 1425 Posted June 3, 2020 He brought a sticker... 1 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted June 3, 2020 That feeling you get when you’ve waited so long for parts to arrive you forget which projects they’re for! So after a long think, from left to right I have: 3Racing Sakura FGX Parts to make a DT02 accommodate hex front wheels Hardened outdrives to make my WR01 4WD again DF02 bits and a new spur, because the thing is always broke (why don't I just sell it?!!) Body spacing o-rings M-Chassis universals to finish my TT01 3Racing M-chassis conversion LEDs which I now realise have the wrong plug on, so time to do some soldering TL01 universals also for the WR01 chassis (fitting narrow arms) All the blue screws, turnbuckles and ball studs are for the TA02 project I've also bought a hardened 22T Pinion. Why did I buy that? 1 1 Share this post Link to post Share on other sites
Green Tokyo 53 Posted June 3, 2020 Today is a good day. My first kit in 20 years. Aluminium prop shaft and ball bearings. Just waiting on the aluminium prop joints now. I did say I was waiting for a Plasma Edge 2, but, as things have transpired. I've decided to opt for the Neo Scorcher. Very happy indeed 3 Share this post Link to post Share on other sites
dannymulder 766 Posted June 3, 2020 This robbe firefox tamiya bigwig clone for 25 euro, not sure what to do with it I am going to compare it with tamiya parts and look of parts fit, if not then I am going to paint the car and put on another bumper and then it is nice for on the shelf. And a tamiya ta-03rs for 60 euro with a extra new rare spare toyota corolla 237mm wheelbase body, the chassis is in real good condition so I going to rebuild this one and I am thinking making it a front motor chassis. I 2 Share this post Link to post Share on other sites
Biz73 603 Posted June 3, 2020 CRP #1715 - It's an adapter to use FAV/Hornet/Lunchbox/etc wheels on a car that uses a 12mm hex wheel. I'm hoping it will work to put FAV wheels/tires on my Ultima that should be here Friday. It will be nice to be able to run Tamiya stuff as well as the stock wheels. I'll give it a try this evening on another buggy. Share this post Link to post Share on other sites
Mark_C 198 Posted June 4, 2020 TA03F: I notice the top mount on the rear uprights are both split, best place for aluminium upgrades ? Stock parts not available until next monrh according to various retailers. The original impreza shell is mashed, don't think they (or in fact any TA03F shells) are in production currently. P.O has fitted new wheels and tyres which is a bonus. 1 Share this post Link to post Share on other sites
futureworks 864 Posted June 4, 2020 A nice set of 53226 front hubs for TA01/02/FF01/2 cars picked up off eBay the other day. They look completely unused, which is a bonus! 1 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted June 4, 2020 2 hours ago, Mark_C said: TA03F I notice the top mount on the rear uprights are both split, best place for aluminium upgrades ? Stock parts not available until next monrh according to various retailers. The original impreza shell is mashed, don't think they (or in fact any TA03F shells) are in production currently. P.O has fitted new wheels and tyres which is a bonus. That Impress shell was recently re-released with the Monte Carlo livery albeit on a TT02. So you may find an eBay seller has one separate from a kit. As for upgrades... Good luck. Unfortunately many have been out of production for a while, so scouring eBay is your best bet. Gear cases are particularly hard to find (A parts and B parts), so be sure to look after them! Share this post Link to post Share on other sites
Mark_C 198 Posted June 4, 2020 thanks chris, thats interesting, I'll see if I can find the part number for the monte carlo shell. I was considering a escort cosworth shell too. Yeah, seems ot be very ittle out there on the hop ups front, guess its just too old now. Share this post Link to post Share on other sites
Andra 41 Posted June 4, 2020 A boomerang arrived today and then the nice ups man delivered a sport tuned 540 motor and a bearing kit for said boomerang. Share this post Link to post Share on other sites
Bastiaan 180 Posted June 4, 2020 This beauty arrived today! 3 Share this post Link to post Share on other sites
futureworks 864 Posted June 4, 2020 3 minutes ago, Bastiaan said: This beauty arrived today! Looks very sleek - is it a new built dyna? Share this post Link to post Share on other sites