Seanster43 222 Posted July 1, 2020 4 minutes ago, mtbkym01 said: Just further to this, I’ve bought these to go into my Black Clod, and it was the performance of them that convinced me to get them, they obviously have zero timing (compared to the genuine ones) which eliminates any potential issues that may arise from running the genuine ones (one runs in reverse). The black can look is what I was after, and for a bit under $20AUD shipped for 2, I’m happy to take the risk. Whats the total price difference on these? Share this post Link to post Share on other sites
mtbkym01 4008 Posted July 1, 2020 1 hour ago, Seanster43 said: Whats the total price difference on these? For me in Australia, 1 Sport Tuned will cost me (Best price I can find) $42, these 2 from Aliexpress cost me $9.74 each 1 Share this post Link to post Share on other sites
Seanster43 222 Posted July 1, 2020 Fair enough nothing wrong with that! Share this post Link to post Share on other sites
Jonathon Gillham 4606 Posted July 2, 2020 More TA07 parts. The alloy steering arms and bridge, as well as the second set of 54931 arms. I'm impressed with Fedex. I ordered from RCJaz last week, got an email from them on Friday saying shipping would be delayed so do I want to wait for pay an extra NZD$13 for Fedex. Paid the extra and they confirmed recieved and said they'd ship Monday. They shipped Monday and arrived today. I got similar service a few weeks back when I bought the RS7 chassis from RCMart, and that was only NZD$5 more than regular shipping. I have a SkyRC TS160 on its way from RCMart which has been stuck at the border since 13 June, so thats now been about 5 weeks and still not here. 2 Share this post Link to post Share on other sites
ThunderDragonCy 7881 Posted July 2, 2020 A rather beautiful TB03. I wasn't planning on having a 4wd anymore after deciding to race my FF03 instead of my TA06, but my TA06 wasn't even sold when this popped up and i just fancied another go with something "slightly" more conventional than the 06. Plus it shares lots of parts with the FF03. Just waiting on some boring electronics bits to get those installed so i can see how it runs. 4 Share this post Link to post Share on other sites
TurnipJF 9192 Posted July 2, 2020 I think you'll be very happy with it. The FF-03 and TB-03 make great stablemates, and reduce the spares count that you need on hand. 2 Share this post Link to post Share on other sites
Juhunio 6830 Posted July 2, 2020 Clear blue touring car damper parts to go with the clear blue wheels Thanks so much to @Mokei Kagaku for the help getting the parts from Seidel, a credit to the community 5 Share this post Link to post Share on other sites
cliffw0970 49 Posted July 2, 2020 I will start a new thread for this as I will need advice on restoring these OG’s (All my current cars are ReRe’s). BUT, I just got a surprise box from my brother in the post. They have been in many lofts over the last 30 years. He’s moved about and decided he has no inclination to do anything with them, so he gifted them to me. Wouldn’t let me touch them when I was 8/9, so about time :-) More to follow 9 Share this post Link to post Share on other sites
ThunderDragonCy 7881 Posted July 2, 2020 3 hours ago, TurnipJF said: I think you'll be very happy with it. The FF-03 and TB-03 make great stablemates, and reduce the spares count that you need on hand. Thanks. I saw you were very happy with yours, and the general feeling about them is quite positive (unlike the TA06!). Hoping I can get this into a similar "fun to drive" setup as I have managed with my FF03. Share this post Link to post Share on other sites
Fruitfly01 596 Posted July 2, 2020 A used DT01 Mad Fighter body. It's an unusual body moulded in a weird colour, but it was cheap and I've got an idea for a paint job for it. Share this post Link to post Share on other sites
mman2005 443 Posted July 2, 2020 Some steel shafts to replace the screw pins in my thunder dragon. This should hopefully remove a lot of the problem with the A5 part breaking. 2 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted July 2, 2020 My postman still hasn't delivered any of my parcels from the Far East this week So as a touch of retail therapy I visited my local hobby shop, now relocated within walking distance of my house (!!!) And bought these for my upcoming DF02 restoration: Never heard of Helion RC before but they have some pretty decent reviews online. Dampers are "big bore" allegedly and have dust seals. Particularly like the dual springs on the larger dampers, very cool. And then went ahead and spent £100 over at Asiatees which I suspect will take weeks to turn up too... 1 Share this post Link to post Share on other sites
Rb4276 803 Posted July 2, 2020 Reedy 10.5 spec torque for my egress. I have hobbywing justock 10.5 which was good but wanted some more torque and top end with adjustable timing 3 Share this post Link to post Share on other sites
Rb4276 803 Posted July 2, 2020 8 hours ago, mman2005 said: Some steel shafts to replace the screw pins in my thunder dragon. This should hopefully remove a lot of the problem with the A5 part breaking. I did this with my tt02b ms and dt03 before i sold it. It seems to made it smoother 1 Share this post Link to post Share on other sites
stuhas 269 Posted July 2, 2020 A couple of Boxes waiting for me when i got home A nice box from Tamico with a TT-02 AMG GT3 Mercedes and a smaller one from Kamtec with a Bowler Body Share this post Link to post Share on other sites
mman2005 443 Posted July 2, 2020 21 minutes ago, Rb4276 said: Also hoping it assists with my shelf queen TD 👍 Share this post Link to post Share on other sites
Fruitfly01 596 Posted July 3, 2020 I ordered a couple of servos from HobbyKing yestersday. One arrived just now - A Blue Bird BMS 621 DMG. I have these fitted to most of my runners and they seem to work well. No failures yet. But they are getting a bit pricey nowadays, so I also ordered a Turnigy of a similar spec but lower price - TGY-4409MD. Unfortunately that's coming from the EU warehouse so I don't expect to see that for a few weeks. I've no experience with Turnigy servos, so I hope it's a good one. 700th post 1 Share this post Link to post Share on other sites
Mark_C 198 Posted July 3, 2020 ^^ thats quick isn't it! let us know if the turnigy one is any good.. will ned one for this Not sure what body to put on it - I have a Mk2 escort shell, but that might go on the TA03. Also not sure if to go brushless or stick with a 1060 and a 15T brushed motor. Brushless (to me..) inevitably means running lipo and although I have one know they're a bit of a pain.. deicsions decisions.. 1 Share this post Link to post Share on other sites
kwkenuf 184 Posted July 3, 2020 3 hours ago, Fruitfly01 said: But they are getting a bit pricey nowadays, so I also ordered a Turnigy of a similar spec but lower price - TGY-4409MD. Unfortunately that's coming from the EU warehouse so I don't expect to see that for a few weeks. I've no experience with Turnigy servos, so I hope it's a good one. That 4409MD came stock in the Desert Fox from HK. I bashed my DF for a couple of years until I got sick of breaking front suspension pieces. That servo then went into a Stampede that my kids bashed for another couple of years. Now it is in my BL Stampede. I really like it, it's been great to me! I also picked up a couple of 1250TG's and a TS-920 to try out. 1 1 Share this post Link to post Share on other sites
Wez-li 1790 Posted July 3, 2020 First Post in here for a while, first delivery too. Just a little something to get me back in the groove. 5 Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 3, 2020 Organizing all the post that I've been amassing for the TT02 S-type build that I didn't get around to starting yet. It will be epic. For me. 7 Share this post Link to post Share on other sites
ChrisHGTV 37 Posted July 3, 2020 I like those wheels. I've just received a new rear gearbox case sprue for my Chevy S-10. It'll be a bit of a mash up - the existing plastic is red but the new gearbox case etc is the silver Porsche one. Even more of a mash up when I run it with the Chevy wheels and the Racecraft buggy shell and spoiler! I just hope I stop breaking things on it - i'm not going mad with it either. Share this post Link to post Share on other sites
berman 5315 Posted July 3, 2020 On 7/1/2020 at 11:04 PM, mtbkym01 said: Yep I have, I’m not concerned about performance with these at all, it’s purely about the look, silver cans just look so standard, I’m not even all that interested in the new silver Sport Tuned or Torque Tuned Motors TBH I totally agree with you, Kym. They could have at least done a full wrap sticker with some colour on the Torque and new Sport. Half of the fun is getting something that looks physically different. Who wants to look at something that looks identical to the one that comes in every standard kit? On 7/2/2020 at 3:04 PM, Jonathon Gillham said: I have a SkyRC TS160 on its way from RCMart which has been stuck at the border since 13 June, so thats now been about 5 weeks and still not here. If it makes you feel any better, my Kyosho tires still havent arrived from the USA, ordered March 26th. Think I may have to email the seller, even though it's not his fault. 😔 3 Share this post Link to post Share on other sites
mtbkym01 4008 Posted July 4, 2020 3Racing Sakura M4 sport, gonna build this to 210mm wheelbase, 4wd Mini Cooper anyone? 5 Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 4, 2020 More for the Type-S... I promise I will start building it as soon as the hard lower deck arrives. 3 Share this post Link to post Share on other sites