Problemchild 2149 Posted July 4, 2020 On 7/1/2020 at 12:04 PM, mtbkym01 said: Yep I have, I’m not concerned about performance with these at all, it’s purely about the look, silver cans just look so standard, I’m not even all that interested in the new silver Sport Tuned or Torque Tuned Motors TBH Same here you can get 5 of these for £30 JJ 2 Share this post Link to post Share on other sites
Novamadcars 230 Posted July 4, 2020 Just 4 rubber shielded bearings today. Share this post Link to post Share on other sites
E28_M5 94 Posted July 4, 2020 Flysky GT3C transmitter - took 6 weeks to arrive from China and the box has taken a bit of a battering as it was basically just wrapped in a thin plastic bag. Fortunately the contents was perfectly fine! The transmitter looks really good for the price - £40 delivered by slow boat.. 1 Share this post Link to post Share on other sites
Problemchild 2149 Posted July 5, 2020 On 7/1/2020 at 4:48 PM, Badcrumble said: A nice little upgrade arrived today. I won’t be the first real world tester though - might take me a while to get it installed! Thanks @Xeostar Sweeeeeeet - I have delivery envy do give us feedback JJ Share this post Link to post Share on other sites
KalEl63 695 Posted July 6, 2020 Got some Pepper Pots for an up coming build 6 Share this post Link to post Share on other sites
ChrisRx718 4470 Posted July 6, 2020 Yessss! At last the postman delivers. Played a blinder too - the wife has just gone out So what have I ordered? MST wheels and tyres, the wheels are for my Castrol Supra build TT01 propshaft and TT01E A Parts - I had enough other 'bits' to build an entire chassis so why not?! DF02 Springs... Waited so long for these I actually bought entirely different dampers M-06 steering set - replaces the awful Jaz Rider setup which didn't even come with all the parts required to fit! DF03 wheels for upcoming "Project Triggered" TL01 body posts to fit my Amarok to my WR01 3 1 2 Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 6, 2020 Just turned up from RCMart-managed to avoid Swiss import taxes also 😎 5 Share this post Link to post Share on other sites
stuhas 269 Posted July 6, 2020 A Rather Large Box Containing A Smaller Box At Last i have somewhere to put my screws, nuts, bolts and everything in between... 6 Share this post Link to post Share on other sites
barnettgs 5 Posted July 6, 2020 4 hours ago, gregdogghurst said: Just turned up from RCMart-managed to avoid Swiss import taxes also 😎 Jeez, never knew TB-04 chassis exists! Is it the latest in TB chassis series? Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 6, 2020 28 minutes ago, barnettgs said: Jeez, never knew TB-04 chassis exists! Is it the latest in TB chassis series? There’s a TB-05 now also which has an ‘usual’ chassis and gives the option to mount the motor in the front or rear. I chose this as it has a tub style chassis which I prefer and a lot of hop ups included in the kit that I would have ended up buying anyway. Also discounted by 57% on RCMart so double win financially 👍🏽👍🏽 2 Share this post Link to post Share on other sites
berman 5315 Posted July 7, 2020 On 7/4/2020 at 10:06 AM, berman said: I totally agree with you, Kym. They could have at least done a full wrap sticker with some colour on the Torque and new Sport. Half of the fun is getting something that looks physically different. Who wants to look at something that looks identical to the one that comes in every standard kit? If it makes you feel any better, my Kyosho tires still havent arrived from the USA, ordered March 26th. Think I may have to email the seller, even though it's not his fault. 😔 Holy moly! They FINALLY ARRIVED! Ordered 26th of March, now 7th of July 😬😬😬 I was just about to email the guy and ask if he could help locate them... 7 Share this post Link to post Share on other sites
Fruitfly01 596 Posted July 7, 2020 A Hobbywing 1060 ESC. Share this post Link to post Share on other sites
Fruitfly01 596 Posted July 7, 2020 A Technigold motor in very good condition. This was listed as 'never run' and from all outward appearances, this maybe the case. I already have a couple of these and I couldn't help but buy this one too (sucker). Also, it was a bargain when compared to all the other asking prices out there. I couldn't resist. Clean, unscratched sticker No scratched paint on this end, but a couple marks picked out in the photo- someone's possibly played with the timing screw. I think this has been mounted at some point, as seen by the missing paint inside the mounting hole on the right. Clean Endbell, bearing and solders. The only thing that really seems to let it down is the tarnishing of the can. There's mild blotching and discolouration all over the can. I'm hoping it can be removed and the can restored to a better condition. 3 Share this post Link to post Share on other sites
•Axle 145 Posted July 7, 2020 M3 titanium washers, please somebody help me. I need to stop looking for titanium parts 😅... 2 1 Share this post Link to post Share on other sites
Jontea 334 Posted July 7, 2020 These arrived today. 5 Share this post Link to post Share on other sites
Wooders28 4723 Posted July 7, 2020 I was looking for aluminum steering parts for my Dark Impact, but saw some offers on ,Rcmart I couldn't refuse. Spring steel shafts £16, heavy duty shafts £8 and the aluminum wing mount £1.50. Ended up getting the (well some, still need a ,bridge) steering parts off eBay?!? 3 Share this post Link to post Share on other sites
jupitertwo 1484 Posted July 7, 2020 Some receivers to make more of the runners ready to run, to keep impatient children happy and Daddy sane. Realised I didn’t need to buy the 4 channel T-FHSS ones that are twice the price too 4 Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 7, 2020 Hey @Wooders28 I got some universals for my df03 as well! Just received them today. Also universals for my TT02B, and some miscellaneous hardware on the side: 1 Share this post Link to post Share on other sites
Wooders28 4723 Posted July 7, 2020 11 minutes ago, DeadMeat666 said: I got some universals for my df03 as well! I wondered if I should have got more of the spring steel, but the heavy duty have been abused in mine for almost a decade before looking worn. Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 7, 2020 2 minutes ago, Wooders28 said: I wondered if I should have got more of the spring steel, but the heavy duty have been abused in mine for almost a decade before looking worn. I would surmise that the spring steel version is both lighter and stronger, hence the hefty markup compared to the HD. I'll let you know after a decade of use 1 Share this post Link to post Share on other sites
Alexei 547 Posted July 7, 2020 yesterday i had a Yokomo YD-2TC and Tamiya TT-02 Type-S with some few upgrades delivered to me. picked up a few more upgrades for the TT-02 today. 2 Share this post Link to post Share on other sites
KalEl63 695 Posted July 8, 2020 Finally got my 2020 Terra Scorcher 11 Share this post Link to post Share on other sites
moffman 5752 Posted July 8, 2020 I tell you what the postie hasn't brought me lately! And that's rc racer magazine? I've had a subscription to that magazine for as long as I can remember but all their website says is they can't get it printed and the subscription page they have taken it down and that was put up on April 2nd no other information has been put up which is pretty poor especially to subscribers and the other magazines they do seem to be fine I have tried to contact them but I've received no correspondence back! so I can only come to the conclusion that the only rc car magazine in the UK has finally bit the dust??? unless someone knows different? Very sad if it has gone because I know rc car information is instantly on line but I love a good read of a magazine that I get through the letterbox and (peaceful hour or so to myself can't beat it) also it's a record of that month in rc history which online magazines can't do! My stupid irritating cloud can't even keep photos it decides when it feels like deleting them without informing me! 1 Share this post Link to post Share on other sites
barnettgs 5 Posted July 8, 2020 Received these CVA shocks Tamiya #54753 for my MF-01X. This set of 4 works out far cheaper than #50746 (2 shocks), not only that but also includes springs which #50746 do not have. Share this post Link to post Share on other sites
ploots 185 Posted July 8, 2020 This arrived today thanks to @SuperChamp82 1 Share this post Link to post Share on other sites