The "Postman Brought Me" Thread

[ChrisRx718]

Yea as above, or open in Google Chrome and it will automatically translate for you

I had an issue with stock on an order I placed with them and they phoned me and spoke better English than the blokes that work in our factory - who mainly hail from Essex

[wood5tock]

So how do you order off tamico? Struggling with the German? Is there a way to translate the site?

Yea as above, or open in Google Chrome and it will automatically translate for you

I had an issue with stock on an order I placed with them and they phoned me and spoke better English than the blokes that work in our factory - who mainly hail from Essex

Yep that's what I did, use Chrome and a top bar appears to ask uou if you want it translating. Job done

Then open the currency converter and check out how much wedge you are saving/spending

I think now I have got used to Tamico I may have to pop my Banzai cherry with my next kit.

Still got three projects to do first

[wood5tock]

The Gmade shocks are really nice, they are smooth in operation, look and feel quality. Maybe not TRF quality but at £10 each they are very good. I just put a set of 95mm piggybacks on my CPE CF Clod.

Having just built them up I am really pleased with then. The are a bit more chunky than the standard dampers and I wondered if they were going to A. Fit, and B. foul anything. All fitted perfectly though, haven't had a good look at ride height etc yet, will do that tomorrow.

Managed to get a whole weekend to do Tamiya filth!!!

[s howell]

I got Rush on DVD and the stainless steel prop all the way from germany

[ddaenen1]

So how do you order off tamico? Struggling with the German? Is there a way to translate the site?

If you are really doubting and google translate doesn't give you what you want, send me a PM

[SteveU30]

Some bits and bobs for various projects but most importantly, a Fastrax Pit Stand (Wood5tock and Grumpy Pants you can both stop laughing this instant!)

[ChrisRx718]

You bowed to the peer pressure!

It is a nice thing to have, I've got an Ansmann one from years ago but it looks identical.

Today I got excited, then immediately furious that it was the Jehovah's witnesses knocking on my door first thing and not the postman!!!! Get orf my land!

[Percymon]

Good day today :D

From Jason

Super Clod Buster decal sheet

Avante B parts

Avante screw bag D

Avante screw bag F

Avante double ball shaft x 4

From Banzai, all for M-05

53597 M03 Assembly Univ Shaft

54182 Adjustable Upper Arm Set

54184 Aluminium Motor Plate

54191 Alum Racing Steering Set

54192 Aluminum Steering Link

54193 Aluminum Steering Post

53204 M-Chassis Inner Sponge x 2

54319 LW Hollow Shaft Set

54320 Carbon Damper Stay Front

54237 Low Friction King Pin - 4pcs

54239 Stabilizer Set - Front/Rear

54409 Aluminium motor mount

54408 Aluminum Servo Mount

54409 Low Friction step screw

[sidewaysdave69]

percymon you are going to give your postie a hernia

[Tamiya Era]

percymon you are going to give your postie a hernia

Hahahahahahahahahaha....

[Percymon]

percymon you are going to give your postie a hernia

I'll be having the hernia if Banzai don't despatch my M-05 kit soon - ordered 10th Jan.

then i went crazy ordering hop-ups

[wood5tock]

percymon you are going to give your postie a hernia

But only at 1:10th so just a small protuberance

[wood5tock]

Some bits and bobs for various projects but most importantly, a Fastrax Pit Stand (Wood5tock and Grumpy Pants you can both stop laughing this instant!)

...The circle is complete

[wood5tock]

I'll be having the hernia if Banzai don't despatch my M-05 kit soon - ordered 10th Jan.

then i went crazy ordering hop-ups

Perfectly rational link purchases here... Sanity in order

[sidewaysdave69]

I have been waiting since the 12 of December for an avante 2001 body.

in fact I am away to chase them up again...

[TamTom]

Not exactly today but, yesterday I got a very nice Falcon for Restoration or even a very nice runner and a slightly used Dyna Run Touring Car Motor for my special Lancia 037 Rally.

[Boothy]

Yea as above, or open in Google Chrome and it will automatically translate for you

I had an issue with stock on an order I placed with them and they phoned me and spoke better English than the blokes that work in our factory - who mainly hail from Essex

Ahh I was looking on my ipad, just tried on chrome and all becomes clear

Unfortunately that could also be costly, lots of 'ooooh shiny'

[Grumpy pants]

...The circle is complete

You gave in to the temptation!! Nice buy Steve, a very stylish buy at that as well!

[chriss76]

Well it finally came, after a two year hunt and sent all the way from the states between two pieces of laminate flooring (explains the high shipping cost).

A original decal set for the clodbuster ..... With Chevy text !!!!! Finally, now all I need is a clodbuster:)

Chris

[Tamiya Era]

My banzai items are here

1)- 2 x Avante 2001 Body Sets

2)- Nylon Band

3)- Masking Tape

4)- Super tock motor Brush

5)- BZ motor ( yes. another one

But wait!!!.....did you notice something strange???

See how the box is packed. Without any single protection, corcks and bubbles and made its way safe and it is in super Excellent condition. ( Guess they escaped from my anger after all..looool )

Really a miracle!!!!!!!!

Regards

[ChrisRx718]

Delivery from Jim-GTR, basically a stripped-down TL01B Baja Champ

Packaging was spot on too! Can build this up, put a silver can in it and have it to go with my other one for my nephews to both play with at once. Or I could build it up and make it all waterproof and turn it into something mental. Must resist...

Thanks again buddy!

[Percymon]

Today

Set of TRF201 shocks addressed to Dr Percymon !

NEXX8 spur gear

Customs letter for £15 - that'll be yet another US order I've been charged on . HMRC guys seem to stop everything from the US unless it's a very small envelope - grrrrrrr

[Klausen]

Got my brushless combo for my coming TRF801XT build. This is a Losi Xcellorin 1/8 combo with a 160amp esc and 2100kv motor.

[speedy_w_beans]

Got my brushless combo for my coming TRF801XT build. This is a Losi Xcellorin 1/8 combo with a 160amp esc and 2100kv motor.

Nice!

[Percymon]

Nice!

+1