The "Postman Brought Me" Thread

[ChrisRx718]

Recent deliveries (things have gone a bit mad!)

eBay-

Step Screws (For TL01B)

TA03 Aramid Fibre belt (blue!)

Toyota Supra Body Parts Set

Delivery from Banzai -

Hi-torque Servo Saver (Black) x2

RHD cockpit set x1

Yokomo RSR Supra light buckets x1

Tamiya Touring car body parts set x1

20T steel pinion x1

21T steel pinion x1

M3 x 25mm Steel Screw (for mounting motors in TL01 and Blackfoot Xtreme)

Delivery from Hobbyking (still awaiting another...bit worried!)

Bluebird BMS-621DMG servo x2

Turnigy LSD rechargeable AAs x8

Reason for buying the Yokomo light buckets is that the Tamiya Supra only comes with front buckets for the bodyshell, nothing for the rear. The Tamiya ones are also moulded in grey/silver instead of chrome. It was a bit of a gamble as to whether the Yokomo ones would fit but hey presto!

[Percymon]

Perfect !

[ChrisRx718]

Just realised that the picture I took of the headlight isn't great - they fit even better than that but it was impossible to hold and photograph!

It's got to be red for a Supra I think. Going to be part of an obsessive collection of road-going JDM cars consisting of an R34 Skyline and FD3S RX-7. Some day, they'll be finished!

[bromvw]

Lancia 037 lights pod parts for my hybrid Frog Baja . OMG these will look good once trimmed and blended in

[Percymon]

Lancia 037 lights pod parts for my hybrid Frog Baja . OMG these will look good once trimmed and blended in

Hurrah ! :)

[Klausen]

Great day

NIP Tamiya TEU302BK esc from a local guy and newbuilt Optima Mid almost roller from Nick. Thanks a lot for handing out this opportunity NIck.

[cosworthwesty]

A few bits from Banzai for my lads holiday buggy/sand viper

[Percymon]

A set of Avante rere decals

and a red card to collect my crawler winch from mail office (bought from Stella last Thursday !)

[wood5tock]

Some 3M fine line tape in 3mm and 6mm flavour

And a load of grip seal bags for stock

[Fruitfly01]

It's not often these come up on the Bay

[TamTom]

hardly used Technipower motor with box, manual and tool. Unfortunately no insert.

Now I have them four... missing only the Technituned.

[JLZ78]

New XeRun esc for the 502X

Edited to Add : now unsure as Banzai have really let me down.

[ukfox]

Delivery from Seidel today

a manta ray rear gearbox tree,

2 sets of body clips,

Panzer crewman for my leopard tank,

and a fox, well I had to get one eventually,

[Fruitfly01]

Just a little something that I lack in the old tool box. Apparently, this stuff is not edible!

[chriss76]

A nice delivery today, a rolson mini glue gun and two sets of glue sticks, a tamiya tlu-01 led light kit and a vintage set so super shot decals.

Chris

[Klausen]

Another great day. RC10 Classic, LRP servo and some paint

[ChrisRx718]

Some 0.4mm and 0.7mm Kyosho Line Tape. It looks so small (well, it is!) I'm not very good with fiddly jobs either. Any tips?!

[wood5tock]

More organisational goodness for me today, first off I got myself another 12 drawer unit

Due to that fact that my growing amount of RC tools are oozing over my table...

...I have got myself one of these

Oh and an extra large pastry board...

[Percymon]

Today

Speed Passion Competition 3.0 13.5T motor

Speed Passion Competition 3.0 21.5T motor

Speed Passion Ultra 17.5T motor

Lunchbox B parts

Pumpkin Glass sprue

Snap pin set

[Axeboy]

Just a wee one from RcBearings again, 10 x 1150's for the incoming DT03 Neo fighter

Got some spare 1150's from the HB a while back as a Tamiya freebie, so all good

[SteveU30]

Not had anything in a while but I need to get my Lunchbox ready for the next Clumber meet so I ordered some stickers to go on the new black edition body I bought. Also got a belt for a TA03R-S for a future project which I shall reveal at a later date.

[ddaenen1]

After 2 days in the Midlands/UK, came home and all the missing parts to start my Astute restoration came in.

Bulkhead an too many other parts to mention, traded with TC member 996TT! Thanks again!

Black front light weight wheel bought on fleabay

I smell an Astute restoration starting over the weekend

[mastino]

Parts to modify my cc-01 wrangler and some items of aluminum for my egress re-re.

[ChrisRx718]

A can of PS2 Red for my Supra

And not really the postman as these were collected from Watford trade counter, but a massive heap of screws / nuts / washers from Orbital! This is Woodstocks' fault!

The M6 and M8 bolts are for my 1:1 car, I've treated it to some nice stainless steel fixings as I've got to replace the rear axle in the coming weeks. I'm not using any of these bolts for anything structural, though, as they don't have a 'grade' rating, so they're purely for fastening clips etc.

[wood5tock]

A can of PS2 Red for my Supra

And not really the postman as these were collected from Watford trade counter, but a massive heap of screws / nuts / washers from Orbital! This is Woodstocks' fault!

The M6 and M8 bolts are for my 1:1 car, I've treated it to some nice stainless steel fixings as I've got to replace the rear axle in the coming weeks. I'm not using any of these bolts for anything structural, though, as they don't have a 'grade' rating, so they're purely for fastening clips etc.