The "Postman Brought Me" Thread

[Fruitfly01]

A Sport Tuned motor and four 3x38mm screw pins for a Boomer build and a new charger to replace my old Fusion one.

It's a relatively new one from ImaxRC (X100) with one of those fancy touch screens and graphical displays, but I got it mostly to do things that my Fusion won't do, such as discharge, cycle and store. I hope it's reliable.

[alfagta]

A Sport Tuned motor and four 3x38mm screw pins for a Boomer build and a new charger to replace my old Fusion one.

It's a relatively new one from ImaxRC (X100) with one of those fancy touch screens and graphical displays, but I got it mostly to do things that my Fusion won't do, such as discharge, cycle and store. I hope it's reliable.

my mate has had no issues with his at all , unless you call a rather noisy fan 'an issue' enjoy!

[Fruitfly01]

my mate has had no issues with his at all , unless you call a rather noisy fan 'an issue' enjoy!

I'm trying out a few things now - currently discharging a Lipo for storage, and the fan is quite loud. It didn't come on during charging though. It only kicks in if the charger needs cooling.

[alfagta]

I'm trying out a few things now - currently discharging a Lipo for storage, and the fan is quite loud. It didn't come on during charging though. It only kicks in if the charger needs cooling.

yip, the fan will always blow when discharging , especially at 3A , for the cost i was blown away by the over all quality and function of the X100 , i really dont need a new charger but i do find myself hankering after one every time i have a go .

[z00ter]

some more bits arrived for the TA02's

Thanks Wez-li i will be doing my best to do a proper build thread this time, as long as good ol fosters doesnt distract me/make me forget

[XV Pilot]

Once again my wonderful wife has made sure my birthday is full of RC goodness:

The Renault Alpine is a shell that I have liked since it first came out, and I have read good things about the M06, so I am very pleased to have this in my fleet.

With over 20 runners in my fleet, I have run out of model memories on my DX3C, so the 30-model-memory DX4S will allow me to run them all on 2.4GHz.

Plus the motor, bearing kit and servo will help me complete the M06, and the latest Top Gear magazine will makes for entertaining reading!

[alfagta]

Once again my wonderful wife has made sure my birthday is full of RC goodness:

The Renault Alpine is a shell that I have liked since it first came out, and I have read good things about the M06, so I am very pleased to have this in my fleet.

With over 20 runners in my fleet, I have run out of model memories on my DX3C, so the 30-model-memory DX4S will allow me to run them all on 2.4GHz.

Plus the motor, bearing kit and servo will help me complete the M06, and the latest Top Gear magazine will makes for entertaining reading!

nice gift XV , have fun building and driving that puppy , would love to read your thoughts on the dx4s , my dx3r is showing its age so i am looking at new radio systems , not sure if i should stay with spektrum or give the Flysky fs-IT4 a try ,

a small package was on the mat waiting for me today , was stunned to see it was from asiatees , less than a week since i ordered

just a few bits for the dt03 and some 'O'rings for a few of my other cars which are long overdue a damper service ,

[z00ter]

Hey lads second instalment for today, on a spereate post i geus was accepted by me neighbor</p>

Big thanks to TamiyaBigstuff!

[Tamiya1/10]

Went nuts this month on F1. Just picked up from a LHS Tamiya's Wolf F104W with ESC included for $80.00, NIB! Next stop, another seller for TRG F114W for the Wolf conversion. This year Tamiya got my money because of their F1s. No more RC....for now or got yo sell some.

[XV Pilot]

This morning I received a brand new Spektrum DX3C transmitter courtesy of Modelsport. My old one that I got 3 years ago was acting a bit odd so I sent it in for repair. However rather than repairing it and trying to charge me, they sent me a replacement free of charge!

I know they are merely doing their duty, and every shop should do likewise in such a situation in terms of the Sales of Goods Act. However I appreciate it when a company does the right thing straight away without the customer having to fight for it in court. Definitely going to keep supporting Modelsport!

[Percymon]

Spare turnbuckle parts for the axial exo and most of the parts to build a second CR-01 chassis..

[ChrisRx718]

Jeez Percy.

Today's haul in comparison to yours!

Massive thanks goes out to Jim_GTR for sorting this out for me, all for no charge too! Top bloke.

[z00ter]

bits still tricaling in, second skyline speed gear and mantaray ball diff

[alfagta]

just a pair of 19t 0.8 module brass pinions from Maverick for my dt-02 and dt-03 , this evening i shall mostly be shredding grass

[zomboided]

ESC and some LEDs for my Monster Beetle rebuild Can finish up the chassis and electronics now!

[Wez-li]

Boring delivery of the day.

Box was a bit overkill

[cosworthwesty]

Today some nice GPM parts for my CR-01 Rock Socker build, great service from asiatees. 😃😃😃😃

[alfagta]

just some 53576 damper oil seals today , i am feeling a new kit purchase coming on , running out of things to fix on my other cars

[ddaenen1]

Behold!

This will go into my TA05 v. II Project (once i get to it)

[InsaneJim69]

Behold!

This will go into my TA05 v. II Project (once i get to it)

Looks gorgeous !! I missed out on a nib one last year, went for £11.50 on ebay Gutted wasn't the word, was at a night out and couldn't get phone signal to bid.

James

[SteveU30]

Added an S4 to my Lancia Martini lineup today, just the Stratos left to go now!

[ChrisRx718]

Text from DHL - Package from Prague ready to collect...

This was a tactical decision, they sent me a text originally asking if I would like the parcel delivered to my local DHL collection point instead. I figure, this way the Mrs won't even see it!

Trouble is we are waiting on a bl**dy Meerkat from that insurance website and I didn't want her seeing an invoice for $99 for some bent metal

[SteveU30]

Those Meerkats take 6 weeks to come matey

[ChrisRx718]

Those Meerkats take 6 weeks to come matey

Yea, it's been around that long hence the decision to avoid any parcels going to the house - she will just open them anticipating a stuffed toy!

[ChrisRx718]

Some 'actual' parts instead of empty posts...

Don Jarr -

Tow Hook

Snorkel

Winch 'Cable' (or string to be more precise!)

And from eBay-

A sheet of 2mm thick rubber?! for my CC01 build...