Jump to content

Recommended Posts

Posted

Received the following:

  • RC4WD Tough Armour bumper for my TrailFinder 2 kit
  • RC4WD "TOYOTA" lettering kit for future Bruiser

So, what did the postman deliver you today ?

2 x Astute bodies, undercowls and wings from ***** (pity I can't find good repro decals anymore).

Hey seeing that you started this thread, prompted me to look at page 1. for the first time. WOW. I can't believe your first post and then later djmcnz had that awesome Egress haul. Great stuff.

Posted

I'd line up the ***** undercowl with a chassis plate before you start trimming, the one they sent me had shrunk and the holes where out big time

Posted

I'd line up the ***** undercowl with a chassis plate before you start trimming, the one they sent me had shrunk and the holes where out big time

My Astute one was fine, as was the Egress one; but the Avante 2001 one was a good 3-4mm short in the main section and wasn't a great fit.

Posted

Just arrived at 1700 ! Modelsport RV-12 Assault . Going to use this in the 4x4x4 Blackfoot . Best of both worlds - lipo compatable and brushed 55t crawler motors so i should get reasonable run times

Posted

My Astute one was fine, as was the Egress one; but the Avante 2001 one was a good 3-4mm short in the main section and wasn't a great fit.

3EF95FD5-ACD2-497C-96C2-3EEAD70AB9F4-2109-00000391B8576706.jpg

Same sorta discrepancy, this with it bolted at the back, follows the chassis perfectly then doesn't tally up.

Posted

Well even though I'm still away on holiday I've managed to have a traxxas 380 motor and some hex drivers delivered to the hotel, and collect a kyosho sand master kit from modelsport. I should have a set of tlt wheels on the office desk too, and a twin detonator is on it's way too!!

Posted

"mr.retreader" sent me a metal chassis plate for my Buggy Champ today. The rest of the day was spent in a Herculean struggle to undo the stripped screws to separate the gearbox and radio box from the chassis...

Edit: Finished the installation-

imag1786.jpg

The previous chassis plates...

imag1776.jpg

... gave way to this...

imag1780q.jpg

... and now the car's stiffness approaches that of my Avante. Should be fun to drive it again, though my batteries need conditioning. Instead of the whole front half of the chassis flexing on impact, only the bumper does like it should!

Posted

my friendly parcel delivery dude just dropped of my marui samuri .. been chasing one for a while now , but thanks to tc member '' onetenth '', i now have one .. its in great nik and rtr if i wanted to , but she will be a shelf mate for my hunter , galaxy, cj7 jeep and the big bear .. new body and decals are on their way .. w00t ;)

getuserimage-1.jpg

Posted

551C8F83-2727-4EEA-BCB1-7202ADEC32EA-115-0000001A13EAC0A5.jpg

Scored with this built but unused TRF201 and a truck load of spares for an absolute steal. Poor guy must of been screwing for what it went for!

Posted

Scored with this built but unused TRF201 and a truck load of spares for an absolute steal. Poor guy must of been screwing for what it went for!

Wow! Really? That's makes me sad (for me). ;)

Such a wicked little 2WD... and that's a mint example.

Posted

I truely expected it to go for more than the bid I put down which was half of what was paid out for the car and spares. That's eBay for you, I lost out big time on some 1:1car stuff I sold earlier in the year so it kinda balances itself out

Posted

no pics but a bag of spares from RC mart for my TC, a new Muchmore pitmat and a new Muchmore setup board

If im not fast i have to look good whilst im doing it!!

Posted

1 set of ceramic bearings for my Reedy Sonic Motor

1 set of front shock shafts for my B4 buggy

i set of Reedy stickers and a Reedy T-shirt

You have to look good whilst you are racing :)

Posted

Todays arrivals..

9 Tamiya to xt60 battery convertor leads (dirt cheap from Hobbyking and an easy wat to use Hobbyking/Turnigy lipos with Tamiya plugs (current limitations aside)

3700kV brushless 450 size heli motor

Posted

Pair of RC4WD 55t crawler motors for my blackfoot / dagger 4x4x4 project . Just waiting for the wheels to arrive ( thanks Dave 956 ) and i can crack on and get it up and running .

Posted

Twin Detonator turned up (finally ) at the office. Courier company decided to change the delivery address to somewhere else 300yards away - no wonder it took them 6 attempts !!

Posted

Second delivery - set of Huge kyosho monster truck wheels / tires for the 4x4x4 . Dave 956 said these were massive and he was'nt kidding lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recent Status Updates

×
×
  • Create New...