The "Postman Brought Me" Thread

[Sheriff]

Just arrived... glad I was working from home today (although the post office is only 300 meters away from my house).

The Technigold in the bashed box is because it is new and was only €30 -

The Dyna-Run and wheel adapters are for my yet-to-be-fully-planned Taisan Porsche upgrade project... (58157+53166+?)

A NIB Technigold for €30?!!! Blimey, a proper bargain!

[Tamiya Era]

Just arrived... glad I was working from home today (although the post office is only 300 meters away from my house).

The Technigold in the bashed box is because it is new and was only €30 -

The Dyna-Run and wheel adapters are for my yet-to-be-fully-planned Taisan Porsche upgrade project... (58157+53166+?)

YUmmy Vintage parts

[djmcnz]

A NIB Technigold for €30?!!! Blimey, a proper bargain!

Not bad eh? Makes up for the "mint condition" one I got last year for 50 quid that turned out to be "not so mint". I snapped this one up buy it now by pure luck 3 minutes after the auction started.

YUmmy Vintage parts

I knew you'd be a sucker for those!

Wait till I start the Taisan Hop-Up project...

[Tamiya Era]

Not bad eh? Makes up for the "mint condition" one I got last year for 50 quid that turned out to be "not so mint". I snapped this one up buy it now by pure luck 3 minutes after the auction started.

I knew you'd be a sucker for those!

Wait till I start the Taisan Hop-Up project...

Lool

Dave,i got a 99% new technigold for $0 ,

[Percymon]

I take it all back, postie left me a top force d parts tree; which means ican get on with the other side of the rebuild now lol!

[djmcnz]

Wait till I start the Taisan Hop-Up project...

Talking about which, I was surprised this just arrived... now if I can only find a front one!

I take it all back, postie left me a top force d parts tree; which means ican get on with the other side of the rebuild now lol!

You have a late postie too - must be Monday. I'm keeping an eye on your TF so this is good news.

[F2 Stu]

NIP DF03 black wheels, & 2011 avante torque splitter set for my Egress RS project

[hammerstien]

nice old vintage mardave mini then a nice man dropped off a madcap this evening

[matman]

Its that modern day D1ck Turpin who's to blame, otherwise known as matman

I sent your postman an Email , This it why you are not getting a thing .....

[Percymon]

Well the email didn't get through

This morning...

from stella..

1 x Titanium 3mm Turnbuckle - 32mm (2 pcs)

1 x Titanium 3mm Turnbuckle - 38mm (2 pcs)

1 x Titanium 3mm Turnbuckle - 42mm (2 pcs)

1 x 42234 TRF Sticker C (Mirror Finish)

1 x 42164 TRF Sticker C

1 x 50529 4WD Touring & Rally Car Plastic Gear Set

1 x 50596 5mm Adjuster (6 pcs.)

and from empire-rc..

2 x 84301 Tamiya High Capacity Damper Set (Rear)

Happy days :D :D

[Percymon]

...plus a pair of TA01 uprights and a steel 18tooth pinion when i got home (plus Haribo's - thanks Joanne )

[PurpleLunch]

Finally received my FF01 in the mail!

[Grastens]

Astute A parts arrived from Tony; made a little more progress on the build:

The parts were crammed into my mailbox, though, meaning that several parts were off the trees, but nothing some trimming did not fix.

Edit: OH YES

[Tamiya Era]

Received from rc.sausage.dog:

1)- i pair of avante wheels & tires.

2)- 1150 x 4, 1510 x 4, 850 x 8, 840 x 3 TRF flourine coated bearing ( $$$,, )

3)- TRF 4mm blue wheel hub

4)-........... to be continued

Received from Champ. jp:

1)- Avante BS KIT

2)- Front & Rear Hi-Cap Dampers

[Percymon]

Today a manta ray pressed parts bag and a sport tuned motor.

[PurpleLunch]

-additional receiver

-Tamiya ceramic grease

-Tamiya ball diff grease

[Grastens]

Pieces for my Losi Micro-T arrived today; after losing that one puny e-clip I can finally run it again...

[wilton84]

He brought me my MFU and spare body for my scania R620 and some mini tamiya models from japan

[Percymon]

Nothing much exciting today, a sheet of decals that are now mostly adorning the kyosho sand master

[mr crispy]

Used TL01 chassis and a bag of spares. Amazingly although the chassis has been very well used none of the shock mounts are cracked and I'm yet to find a stripped thread! Also had a result with the standard motor included in the spare parts as it turned out to be a RS540 Johnson motor! Thats the 2nd one if those I've picked up this year without realising until it arrived... Yay!

[Percymon]

... none of the shock mounts are cracked and I'm yet to find a stripped thread!

Sounds like someone actually took some care building it rather than the often found (at least by me !) 'tighten everything 'til the screw head deforms'

[mr crispy]

That's exactly what I was expecting Percymon so it's a nice surprise.

[PaPeRo]

Today I got a lightweight slipper plate, some beadlock wheels and a 1st gen RX-7 body.

[Percymon]

This mornings arrivals..

pair of Top Force universals

Top Force undercowl

Top Force C parts

Top Force bumper

Top Force J parts

Screw bags

just waiting on B parts and the rebuild (or it that new build ? ) can proceed

[atf300]

Today's pickup

SCX10 Dingo RTR with a badly painted underbody , interior and cherokee shell . the shell is kinda nice , but i need to strip it and paint it to my own standards. also came with a flysky rebranded radio, which is extra useful as my girlfriend can use it on her TT01E. the price for all this was very good at 170eur