Servo/motor Problem

[driftking_v8]

If my motor goes to hard, my servo goes trilling, it becomes very ''nervous'' and i cant steer ??

what's the problem ??, srry 4 my bad englisch

[mb_c11]

Does your motor have capacitors?

If not, it's likely to be interference...(and you know the fix: add capacitors to your motor).

[driftking_v8]

Does your motor have capacitors?

If not, it's likely to be interference...(and you know the fix: add capacitors to your motor).

do you know where I can buy one ?? a website plz

grtz Marc

[grizy]

Your local RC hobby shop should have them or you could try an electronics retailer.

As an example RC Planet - Motor Capacitors

And heres how you should fit them Installing Motor Capacitors

Grizy

[billg4]

also a large current draw will cause weak response from a servo if the BEC, Batter Eliminator Circuitry, does not provide enough amps

2 simple ways to help fix this without spending much money

drop a few pinion teeth

run a reciever battery

Other than that I'd suggest a less powerfull motor or better ESC

[driftking_v8]

also a large current draw will cause weak response from a servo if the BEC, Batter Eliminator Circuitry, does not provide enough amps

2 simple ways to help fix this without spending much money

drop a few pinion teeth

run a reciever battery

Other than that I'd suggest a less powerfull motor or better ESC

thanks man awesome I now use a receiver battery and it works sow the

servo had probably almost no power

ty Marc