Txt-1 Cantilever Screw Source?

[BrandXMan 0]

Still in the mines, replaceing and rebuilding my project TXT-1. I've come to a pain in the neck part. I'd like to use the stock catilever screws (MF6) and spacer (MF7) to mount the....you guessed it, the cantilevers. They are part of Screw Bag F #9465588. Trouble is, most venders list it as discontinued and TamiyaUSA had it listed as Temporarily not in stock, so I'm kind of in a bind.

Anyone know of a source for the screws and spacers, or maybe willing to part with a set they don't use anymore?? The screws are listed as MF6 and the spacer is listed as MF7 in the instruction booklet.

thanks again!

--B

[Saito2 7678]

Digging this one up from the grave because guess what? I'm in the same bind looking for the same screws (and with luck the spacers too). They are now solidly discontinued on TUSA.

[TenzoR 66]

If you have an example, take it to the hardware store (the ones that specializes in fastner) and see if they know what type is it then you can probably find it more readily. The only thing that comes in mind is a special type of shoulder bolt but this particular one has two pivot point. 

[TenzoR 66]

Do a search for Double Shoulder Pan Head bolt. If you need the exact measurement, I can probably get it for you too but I have to find some time to disassemble mine TXT-1

[Saito2 7678]

1 hour ago, TenzoR said:

Do a search for Double Shoulder Pan Head bolt. If you need the exact measurement, I can probably get it for you too but I have to find some time to disassemble mine TXT-1

Cool. Thanks for the heads-up on what to look for. I've got a TXT-1 I can pull apart to check the bolt measurement. Thanks for the offer though.