scorcher-tec 0 Posted February 3, 2011 Hi All I have searched the forums and not come up with this topic. Does anyone know what part no the Tamiya srb Ball plates are i have a broken one. Not sure why or how ( probably a badly built i am a noob after all). Need to gat one from somewhere no idea where i have checked the bay but don't know it's part no. Thanks in advance Mark Share this post Link to post Share on other sites
scorcher-tec 0 Posted February 3, 2011 you will have to contact tamiya, there are no spares for that part, you would have to buy a new ball diff set to get the plates. **** :/ Thanks for the reply Share this post Link to post Share on other sites
wildwillydriver 33 Posted February 15, 2011 Try with TA04 Ball Diff plates part # 50880 they seems to have the same measures and are cheap and easy to find. Not 100% sure but..... Bye. WWD Share this post Link to post Share on other sites
Origineelreclamebord 45 Posted February 15, 2011 I think WWD is right. I haven't checked the measurements of the TA04 diff, but surely - as Tamiya does this with many of their parts - the measurements of the pressure plates on different chassis are the same, making parts interchangeable If that doesn't work, contact Tamiya. You can also try going to a good hardware store and see if they might have rings with the same size (as that is what they practically are - chances are it's a standardized measurement so Tamiya can buy the rings straight from a supplier). Share this post Link to post Share on other sites
scorcher-tec 0 Posted February 15, 2011 Hi Thanks guys i am looking into that part no. I will reply with my findings. Share this post Link to post Share on other sites
