lipo for my Scorchers

[karooha MB 0]

Hey there fine folks of Tamiya Land.

I have only a small question for you.............

Since buying a few ipo's for my Slash and Strike I am now in the mood to upgrade the power in my Scorcher/s to Lipo. I tend to run with the radio box in place so I need to source a suitable sized Lipo. I run a 13.5 LRP Eraser Brushless system, so Lipo will drop in fine, except for the size issue. With so many of the blighters on the market now my brain is not keeping up.

Does anyone have a recommendation for suitable Lipo's that will drop in the radio Tub (not LiFe) or will I have to lose the radio tub and go the strap down to chassis route?

Cheers y'all, and if anyone has a mo can you also do something about the weather?

Peace...........

[southy 6]

I run 2200mah Turnigy and DLG power 2S 25C Lipo in mine with a 13T Ezrun brushless system. Turnigy come from Hobbyking and DLG power have an Ebay store. There both pretty cheap, have good power and fit the radio box with room to spare. I put velcro tab on bottom to keep it in place.

[karooha MB 0]

I run 2200mah Turnigy and DLG power 2S 25C Lipo in mine with a 13T Ezrun brushless system. Turnigy come from Hobbyking and DLG power have an Ebay store. There both pretty cheap, have good power and fit the radio box with room to spare. I put velcro tab on bottom to keep it in place.

Nice one, thanks. I use a couple of the Turnigy Hard Case Lipo's in my Slash, wasn't aware they had a smaller profile version. I have bought a 40c Turnigy, cant wait to try it in the SS, I currently use NiMh 3700Mah Humps and it flies already, gonna be a blast on Lipo!

Cheers again

[berman 5319]

I went with these, but like southy posted above, there are 2200mah the same size as these, and I think 2650mah that will fit in the tub east-west without the sponge. Interested to know what 40c turnigy you ordered?

So cheap... so much punch