Cooltoys 129 Posted August 13, 2011 Got a hotshot recently came with a lot of parts. Cleaned it up a bit as it was really dusty... Need a little help on this model as i am not too familiar with it. So far i know it missing an underside piece cover or chassis? Looking for one dogbone for the front, wheels & other stuff that i will discover when you guys look at it. Share this post Link to post Share on other sites
WillyChang 1814 Posted August 13, 2011 looks like an original Hotshot (1) you're missing bottom "tub" for chassis that holds the servos etc, plus you'll need the servo hardware & servosaver etc tub & parts from re-re will be usable, wheels/tyres identical. Not so on dogbone though, you'll need to get original. Share this post Link to post Share on other sites
Cooltoys 129 Posted August 13, 2011 looks like an original Hotshot (1)you're missing bottom "tub" for chassis that holds the servos etc, plus you'll need the servo hardware & servosaver etc tub & parts from re-re will be usable, wheels/tyres identical. Not so on dogbone though, you'll need to get original. Nice to hear the re-re tub/chassis will be usable.. Time to order one.. It has the servo still on the car but not sure if its complete. I see two pieces of it there. Anybody has a original dogbone around? I need one.. Share this post Link to post Share on other sites
stu22 12 Posted August 13, 2011 Don't have any spare dog bones but this may help: http://seantu.com/RC/TamiyaManuals/58391_HotShot.pdf Share this post Link to post Share on other sites
Cooltoys 129 Posted August 13, 2011 Don't have any spare dog bones but this may help:http://seantu.com/RC/TamiyaManuals/58391_HotShot.pdf Thanks! That will be very useful for me. Share this post Link to post Share on other sites
stu22 12 Posted August 13, 2011 Thanks! That will be very useful for me. I'll see if I can free up the time to scan the vintage manual I have. Share this post Link to post Share on other sites
larbut 4 Posted August 13, 2011 You could also try to search on google.com like this: "tamiya 58047 manual" -Lars Share this post Link to post Share on other sites
commiedoor 18 Posted August 15, 2011 i got 2 bottom tubs and a spare bone or 2 . as far as i could tell there was no difference in the bones on my original hotty . the bones had some line around the ends but other than that , the same . the end bits are different to other drive cups as the ball is bigger . how are the rear arms ? no broken off bits ? Share this post Link to post Share on other sites
HunterZero 76 Posted August 16, 2011 i got 2 bottom tubs and a spare bone or 2 . as far as i could tell there was no difference in the bones on my original hotty . the bones had some line around the ends but other than that , the same . the end bits are different to other drive cups as the ball is bigger . how are the rear arms ? no broken off bits ? Remember that there are two different lengths to the original Hot Shot dogbones. The rear ones are slightly longer and do not have the line around them, the front ones are shorter and do have the line. I don't think it will cause any problems if you mix them up. The re-re Hot Shot instructs you to use the TA01 style front knuckles. The front dogbones are also shorter than the rear, and have a rib around the middle. - James Share this post Link to post Share on other sites
Cooltoys 129 Posted August 16, 2011 i got 2 bottom tubs and a spare bone or 2 . as far as i could tell there was no difference in the bones on my original hotty . the bones had some line around the ends but other than that , the same . the end bits are different to other drive cups as the ball is bigger . how are the rear arms ? no broken off bits ? The rear arms are great. No broken off bits or anything.. It looks like after the rubber bag melted on the motor it wasn't used much after. The tires didn't have much wear on it too. I guess parts went missing from storage or something.. I haven't replaced anything yet on the buggy. Still missing bottom tub,dog bones & 2 tires. I'll take better pics on the next one.. Share this post Link to post Share on other sites
HunterZero 76 Posted August 17, 2011 Yeah the rubber bags disintegrated pretty quickly. Better just to leave it off. Radio box was probably removed and raided to get the RC gear out of it, and never reattached to the car. You're probably missing some miscellaneous parts from the radio box, like the servo mounts (and washers/screws), steering horn, brass steering ball joints, and servo saver (easy to get, same as re-re E parts, and S servo saver parts are still easy to get), and the 6 screws that attach the radio box, and the snap pin mounts and snap pins that hold the battery plate onto the radio box. You're also missing the front bumper and skid guard (and mounting screw hardware). You can just use re-re C parts for that. I would ditch the standard speed controller that's in it (the thing dangling underneath with all the wires), and replace it with a modern electronic speed control (ESC). A TEU-101BK/TEU-104BK will do just fine. - James Share this post Link to post Share on other sites
Cooltoys 129 Posted August 20, 2011 Got a few photos yesterday. Found another hotshot. Installed the right side wheels for pics bald ones.. the first one i got was missing 1 front & 1 rear wheel..Still have to dismantle everything for a full rebuild some time. Its missing a bumper.. Anyone have one? I replaced the motor from the other hotshot i got it had a nice motor on it.. Share this post Link to post Share on other sites
simondo 0 Posted August 20, 2011 Looking good! i really should start my super shot resto..... Share this post Link to post Share on other sites
KalEl63 695 Posted August 20, 2011 nice... very nice.... I like the stand too where did you get that from? Share this post Link to post Share on other sites
commiedoor 18 Posted August 21, 2011 hey cool , i found a 2 tubs and front bar and some reasonable wheels . one tub brand new , the other used but looks new ,the front barhas red painton it , looks a bit used but better than the one you got , no bone . and no i really dont want to stuff about with pics . if ur keen pm me ur address and i will work out postage and price Share this post Link to post Share on other sites
Cooltoys 129 Posted August 21, 2011 Looking good! i really should start my super shot resto..... Thanks Simondo! Would love to see the super shot resto too.. @ KALEI63 Got the stand from a buddy of mine sitting in his shelf. I'll ask where he got it from. @Commiedoor pm sent. Share this post Link to post Share on other sites
metalmickey0 0 Posted September 19, 2011 Them front dogbones are like rocking horse poo. My resto was missing one. The one i had was knackered. Just found a new set on ebay, curtisee of a fellow member. I will now have a roller original. Share this post Link to post Share on other sites
TomEG 24 Posted September 19, 2011 Them front dogbones are like rocking horse poo. My resto was missing one. The one i had was knackered. Just found a new set on ebay, curtisee of a fellow member. I will now have a roller original. If you have a spare propeller shaft, I'm interrested ;-) I need one for my Supershot. Tom Share this post Link to post Share on other sites
metalmickey0 0 Posted September 20, 2011 If you have a spare propeller shaft, I'm interrested ;-) I need one for my Supershot.Tom Sorry no , just had a look throo my bits. Got rear driveshafts, gears, hub carriers, etc All the usual stuff you break Rych Share this post Link to post Share on other sites
TomEG 24 Posted September 20, 2011 Sorry no , just had a look throo my bits. Got rear driveshafts, gears, hub carriers, etc All the usual stuff you breakRych I'll just have to keep looking ;-) Share this post Link to post Share on other sites
Cooltoys 129 Posted November 20, 2011 A little update on the hotshot. Bought some new re-re rims. They are too white & didn't match the fronts. Only to find out later i had some new in package ones sitting in the shelf hiding.. Installed the new rims & tires. I had some front ones that i know of. Totally forgot about the rear ones.. New battery holder from crp. Share this post Link to post Share on other sites
matman 1499 Posted November 20, 2011 A little update on the hotshot. Bought some new re-re rims. They are too white & didn't match the fronts. Only to find out later i had some new in package ones sitting in the shelf hiding.. Installed the new rims & tires. I had some front ones that i know of. Totally forgot about the rear ones.. New battery holder from crp. Great looking battery holder , very nice job . If i look around ALL of my stuff & in box's , cupboards etc I would be surprised on what i have . I'm sure we all would ., We are RC junkies , with hidden rc bits Share this post Link to post Share on other sites
dj destiny 0 Posted November 20, 2011 Those front drive shafts are a nightmare, I still need a pair for my vintage hotshot Share this post Link to post Share on other sites
Cooltoys 129 Posted November 21, 2011 Those front drive shafts are a nightmare, I still need a pair for my vintage hotshot Yeah i know.... The re re ones can be used i think? Unless you are restoring to full vintage then you need to find those... @ Matman Thanks! The battery holder is a cheap upgrade.. Rc junkies yup!! hahahha... Share this post Link to post Share on other sites
dj destiny 0 Posted November 21, 2011 I'm doing a full restore, I've got a rere and vintage one Share this post Link to post Share on other sites