dualdigger 62 Posted October 14, 2011 Have you guys seen this yet? Share this post Link to post Share on other sites
B.M.T. 127 Posted October 14, 2011 Nice find! Notice the oil shock upgrade to the FAV? Wild One front towers, but the shocks are either anodised black or are plastic. Share this post Link to post Share on other sites
kiasukid 52 Posted October 14, 2011 Pics available here: http://www.hobby-show.info/tokyo2011/ Share this post Link to post Share on other sites
djmcnz 754 Posted October 14, 2011 Pics available here: http://www.hobby-show.info/tokyo2011/ That! Share this post Link to post Share on other sites
GregM 1109 Posted October 14, 2011 I suppose these will be used to model artificial food that you will find on the shopfronts of restaurants in Japan? Share this post Link to post Share on other sites
DerbyDan 0 Posted October 14, 2011 See the MiniZ Optima buggy from Kyosho modeled on the original Optima - which was also displayed.... I wonder if Kyosho have any plans to re-release any of their vintage off-road cars in full 1/10th scale?? Share this post Link to post Share on other sites
kalsh 44 Posted October 14, 2011 Oh dear what a disappointment the MudBlaster is- I thought they might have used the Brat chassis and come out with the additional parts required for the Mudblaster which the original Blackfoot and Monster Beetle used also - I guess when they re release the Monster Beetle it will be on the same chasssis as The Blackfoot III and the Mudblaster which I dont really like (yes I can hear lots of people say it is a much better chassis) because I like the original chassis. Share this post Link to post Share on other sites
Wandy 1527 Posted October 14, 2011 Nice find!Notice the oil shock upgrade to the FAV? Wild One front towers, but the shocks are either anodised black or are plastic. I hope the Wild One re-release does not come with those fitted! The Scirocco is a beauty.....a must have. Share this post Link to post Share on other sites
GregM 1109 Posted October 14, 2011 I wish Tamiya would have made a mix and match of old parts, parts from similar models, and reinforced new parts for the Mud Blaster II, as they did with the re-release Hot Shot and the re-re Frog. The Mud Blaster II could have used a King Blackfoot chassis (sturdy gearbox and double wishbone suspension), in addition with special bumpers to retain the original look. Share this post Link to post Share on other sites
EddScott 134 Posted October 14, 2011 Gundam stuff looks really cool. Theres even some Zoids, now that takes me back further than Tamiya!!! Nice Kato trains too. Share this post Link to post Share on other sites
dualdigger 62 Posted October 14, 2011 anyone notice that the Vajra was missing, seems strange not to be at the Tokyo hobby show...... must have been sold out. lol Share this post Link to post Share on other sites
metalmickey0 0 Posted October 14, 2011 Pics available here: http://www.hobby-show.info/tokyo2011/ I would tread with caution if clicking this link , as it just crashed my pc and froze it up when i tried it Share this post Link to post Share on other sites
dabigbozz 5 Posted October 14, 2011 Nice find!Notice the oil shock upgrade to the FAV? Wild One front towers, but the shocks are either anodised black or are plastic. Hi there, the shocks seem to be made of aluminum. Says so on the the sign right next to it: Aluminum Damper Set (84258) Hope that helps, Cheers, dabigbozz Share this post Link to post Share on other sites
markbt73 5316 Posted October 14, 2011 Not crazy about the graphics on the Mud Blaster, but the re-re Toyota Tom's looks like a fun little toy. It's been many years since I drove a 1/12 pan car... and a 380 should be plenty of power for it. Share this post Link to post Share on other sites
caprinut 0 Posted October 15, 2011 I would tread with caution if clicking this link , as it just crashed my pc and froze it up when i tried it Did the same thing with my computer... Google pics has also the same effect on my pc....grrr Share this post Link to post Share on other sites
Toyranosaur 0 Posted October 15, 2011 Got a re-re Brat, and......Not blown away by the engineering! Front suspension is really weird, especially since it has nice 'real' shocks on the rear. Chassis was such an ugly colour I had to paint it black. Some real tongue-in-cheek stuff, at least I got 2 bodies (With 1 decal sheet....) Tyres need to be bead-blasted to look anything like rubber, have a patchy shiny look that's NOT acceptable. A nice cheap car, but I'm getting tired of Big T's attitude lately- I'll pay the extra nickel, just give me the quality they're been famous for in the past! Chris Share this post Link to post Share on other sites
WillyChang 1814 Posted October 15, 2011 I suppose these will be used to model artificial food that you will find on the shopfronts of restaurants in Japan? no those 1:1 are usually commercially made there's a growing hobby for miniature food, a branch off dollhouse furniture or scale household diorama if u like they're modelled to suit usually 1/6 (aka Barbie) or 1/12 (footscale) sizes; or there's companies like ReMent that do them too Share this post Link to post Share on other sites
bakaguyjean 7 Posted October 15, 2011 no those 1:1 are usually commercially madethere's a growing hobby for miniature food, a branch off dollhouse furniture or scale household diorama if u like they're modelled to suit usually 1/6 (aka Barbie) or 1/12 (footscale) sizes; or there's companies like ReMent that do them too Doll house furniture is nice,but the Japanese girls glue this stuff to thier cell phones and finger nails,thats on of the hot things here. Share this post Link to post Share on other sites
MadInventor 3884 Posted October 15, 2011 Interesting to note that most of the focus and development seems to be on road cars, with the off-roaders being left to either re-re or botch jobs (BFIII & MudBl II). When was the last time we same a genuinely new chassis design for an off roader ?? Share this post Link to post Share on other sites
Chain Driven 0 Posted October 15, 2011 Any idea why the M FOUR chassis has got a 380 sized motor??? Why stick this on an M-Chassis car instead of our standard 540, especially with 4wd to put the power down...don't get it. Anyone can shed light on this? Jerome Share this post Link to post Share on other sites
Origineelreclamebord 45 Posted October 15, 2011 Some nice releases, I think this one deserves a little more attention (even if it's not a car or a Tamiya: http://www.hobby-show.info/tokyo2011/1508.html http://www.hobby-show.info/tokyo2011/1516.html Tamiya's collab with Hirobo for a Chopper - I absolutely love it It's been on Hobby shows before, but it remains an interesting release. Something else (also non-Tamiya) which I found interesting: http://www.hobby-show.info/tokyo2011/1328.html http://www.msuk-forum.co.uk/topic/105915-a...ado-honda-cr-z/ ABC Hobby's M-05 killer? Well maybe not necessarily in handling, but I think ABC Hobby kicked it up a notch in terms of being scale! (Even if many (small or older) FWDs don't use McPherson on all 4 corners). McPherson suspension on an M-chassis... Awesome! The gearbox strongly reminds me of the Kyosho Maxxum FF. The same layout with two metal plates (main plate on the right, reinforcement plate on the left) is used, as well a spur gear cover attached to the axle of the spur gear with a split/snap pin which at the same time keeps the spur gear on it's axle. I'm very curious how this cars handles - If I had the money I'd buy one just to know how it drives opposed to an M-chassis with double wishbone suspension Share this post Link to post Share on other sites
Chain Driven 0 Posted October 15, 2011 Fabulous chassis that is ! ABC leaps ahead. Share this post Link to post Share on other sites
Sayer 742 Posted October 15, 2011 McPherson suspension on an M-chassis... HPI Switch already did this. Share this post Link to post Share on other sites
Origineelreclamebord 45 Posted October 15, 2011 HPI Switch already did this. I didn't notice that that was also McPherson'ed Anyhow, that doesn't dampen my enthusiasm on this chassis! It seems like a cool design, more scale looking still than the HPI Switch, a better transmission and chassis layout (weight better centred left to right). Share this post Link to post Share on other sites