tamiya.mad 0 Posted May 10, 2012 Hi fellow enthusiasts. I picked up a thread on google a while ago that lead me to believe there may be a gearbox manual to help me strip down and rebuild my blazers geabox, I don't think anything is broken but for peace of mind i would like to strip it down, clean and re-assemble it, if there is a manual does anybody know where i can get a copy? Thanks alot Guys and Gals Ben Share this post Link to post Share on other sites
TA-Mark 195 Posted May 10, 2012 This might help. It covers servicing and bearing retro fit of the Bruiser gearbox with exploded photographic views. Share this post Link to post Share on other sites
tamiya.mad 0 Posted May 10, 2012 This might help. It covers servicing and bearing retro fit of the Bruiser gearbox with exploded photographic views. This is fantastic, thanks very much, I will now have much more confidence to attempt this task, I'm pretty sure my transmision is ok but I can strip down, clean and re-assemble now. Thanks for your help Ben Share this post Link to post Share on other sites
OldSchoolRunner 116 Posted May 12, 2012 This is fantastic, thanks very much, I will now have much more confidence to attempt this task, I'm pretty sure my transmision is ok but I can strip down, clean and re-assemble now.Thanks for your help Ben Here is an exploded view of the transmission http://sites.google.com/site/tamiyablazing...3-Speed_sml.jpg Here are the bearing kits http://www.rcscrewz.com/product_info.php/b...cts_id/3969?SID Here is the step by step process of putting bearings in the transmission http://www.tamiyafr.lp-concept.info/3speed...age%20boite.pdf This site seems helpful too http://sites.google.com/site/tamiyablazing...hassisHiluxBody Ben this info might help! It is from one of my older posts. I am looking at rebuilding my Blazing Blazer Transmission next winter. Hope this helps! OSR Share this post Link to post Share on other sites
Badboy 94 Posted May 12, 2012 OSR, all your links are a dead end... Badboy Share this post Link to post Share on other sites
WillyChang 1814 Posted May 13, 2012 no good cutting-n-pasting truncated "..." links... Share this post Link to post Share on other sites
tamiya.mad 0 Posted May 14, 2012 Thanks Guys for all your help, is there an exploded view in existance? Cheers Ben Share this post Link to post Share on other sites
OldSchoolRunner 116 Posted May 16, 2012 QUOTE(tamiya.mad @ May 10 2012, 07:45 PM) 460409[/snapback] This is fantastic, thanks very much, I will now have much more confidence to attempt this task, I'm pretty sure my transmision is ok but I can strip down, clean and re-assemble now. Thanks for your help Ben Here is an exploded view of the transmission http://sites.google.com/site/tamiyablazing...3-Speed_sml.jpg Here are the bearing kits http://www.rcscrewz.com/product_info.php/b...cts_id/3969?SID Here is the step by step process of putting bearings in the transmission http://www.tamiyafr.lp-concept.info/3speed...age%20boite.pdf This site seems helpful too http://sites.google.com/site/tamiyablazing...hassisHiluxBody Ben this info might help! It is from one of my older posts. I am looking at rebuilding my Blazing Blazer Transmission next winter. Hope this helps! OSR Wow! They are all dead or empty! Go figure???? OSR Share this post Link to post Share on other sites
