SRB Suspention kit

[Team Rawlings]

Hey all just a little heads up! Chris from Rouge Ellements has been working on a trailing arm suspention kit for the SRB buggys. Going off his resent posts on Scale 4x4 rc he is nearly ready for production. Go to Scale 4x4rc for the full thread in vendors, Rouge elements, what's wanted. I will keep you all posted if or when he dos go to production on this one. Hears hoping!

Cheers all Shaun :-)

[Finman]

Sounds promising I'll watch this.

I'm trying something based on this http://www.scale4x4rc.org/forums/showthread.php?t=51534&page=5. Now just sorting out the shocks as I didn't want something that extreme.

Rich

[Team Rawlings]

G'day Rich,

Yes a very cool build thread there using the Kyosho scorpion trailing arm suspension if memory serves. I have tried a couple of times now to score some from the usual places but to no avail, usually out bid.

Looking forward to this release from Chris.

Cheers Shaun

[Zac_F83]

I'm wondering where he gets those tires! those are fatter Sand Blaster 915's! in 1.5" diameter no less!

[Flat_Out]

Can't wait to see this set up! I've got a lot of SRBs!

I'm wondering where he gets those tires! those are fatter Sand Blaster 915's! in 1.5" diameter no less!

They're pretty hard to find. I got hooked up with a set. They come in a smaller size too! The 550's in the rear and 225's in the front are going to look awesome!

A couple pics comparing with the 915

[BadWagon]

I just saw his thread on scale4x4.. the kit will be insane no doubt... I'm totally gonna get one.

Guys, I highly suggest signing up on his mailing list. His parts are so sick, and the only way to get in on his runs (they are all limited) is to be on his mailing list.

[Zac_F83]

I just want a set of those larger tires! my SRB handles MUCH better after making the brass chassis brace.. maybe true oil shocks would be nice but not necessary..

[Finman]

Where have you fitted this chassis brace?

Rich

[Zac_F83]

It's a piece of K&S hobby brass (.032" thick x .750" wide) I cut to length and drilled holes from the servo saver/body post - to the chassis brace on the under side of the chassis-

[Team Rawlings]

The simplist mods are often the best ones. Deffinatley going to try that one!

Thanks for the pic.

Shaun