More new Tamiya items from the 2014 Nuremberg Toyfair.

[Mokei Kagaku 2706]

RC:
42275 TRF503 Chassis Kit

56340 Freightliner Cascadia Evolution (Tractor Truck)

5787? XB Tumbling Bull (WR-02G)

5787? XB Ford Zakspeed Turbo Capri Gr.5 Jägermeister (TT01E)

5787? XB Neo Fighter Buggy / Neo Frog (DT-03)

57874 XB Porsche 911 Carrera RSR "White" (TT01E)

58589 Toyota Land Cruiser 40 Pick-Up (GF-01)

58590 Ford Zakspeed Turbo Capri Gr.5 Jägermeister (TT02)

58591 Renault Alpine A110 Monte-Carlo `71 (M06S)

????? XV-01 Chassis Kit Long Damper Specification (temporary description)

RC Hop-Ups:
54579 1150 Ball Bearing Set (16 Pcs.)
54578 TRF 06 Hard Coated Aluminum Pinion Gear (25T)
54577 TRF 06 Hard Coated Aluminum Pinion Gear (21T)

Static Models:
14129 1/12 Ducati 1199 Panigale S (item number not yet fully verified)

32579 1/48 US 2 1/2 ton 6x6 Airfield Fuel Truck
32578 1/48 German Motorbike with Sidecar
????? 1/35 German Heavy Anti-Tank Self-Propelled Gun Nashorn

60785 1/72 Lockheed Martin F-16CJ (Block 50) Fighting Falcon

Paint:

87160 Fine Surface Primer L for Plastic & Metal (Oxide Red)

(Update 29.01.2014, 12:05 CET is highlighted in red)

(Update 29.01.2014, 19:10 CET is highlighted in blue)


Pictures here on the Mokei Kagaku page, including pictures of some already announced new items*: http://www.facebook.com/media/set/?set=a.443523622441246.1073741848.208099459316998&type=1

* 58586 Tumbling Bull

58587 Neo Fighter Buggy

[kiasukid 52]

The steering servo placement on the Willy Land Cruiser looks rather awkward. Is it a dual motor 4WD?

[mr crispy 2293]

I'm liking that Comical Landcruiser. Looks to me like a single motor mounted opposite the servo, you can just make out the power cables below.

Looks like it's got a new 4x4 wheelie chassis too!

I think there will be a few more 4x4 Wild Willys about this year

[TWINSET 1793]

Looks like a similar layout to the Mini 4WD chassis - motor in the middle and the rest of the chassis is a gearbox housing

[ralphee 293]

Mmmm, a new TRF 4WD!

lee

[waterbok 1282]

Oh wow mr T redesigned the WR02 gearbox into a WR04. Those wheels leave some room for improvement.

[Thommo 1217]

I'm liking that Comical Landcruiser. Looks to me like a single motor mounted opposite the servo, you can just make out the power cables below.

Looks like it's got a new 4x4 wheelie chassis too!

I think there will be a few more 4x4 Wild Willys about this year

Looks like a JennyMo creation to me! JennyMo, have you been designing for Tamiya on the side ?

This is going to be popular me thinks.

[Percymon 2184]

Those wheels leave some room for improvement.

They've got to get rid of the vajra stock somewhere

[qatmix 794]

List to buy

TRF503 (A proper buggy you can keep your £300 re released old buggies)

DT03 (for bashing)

4WD Wheelie.... sign me up for that...

but overall...

TRACTOR ----- TRACTOR ------ TRACTOR----- I WANT THE TRACTOR -----

[InsaneJim69 1584]

Yeah that tumbling bull looks awesome. Alot of scope for customising too

James

.

[Fruitfly01 596]

TamiyaBlog has a few photos of the show. The GF01 is a strange beast on the inside. And it appears the Alpine rally body is getting a reissue, although I don't know what chassis it's on yet.

Thanks to JWeston for the heads up on Facebook.

[backtomyroots 432]

42275 TRF503 Chassis Kit

56340 Freightliner Cascadia Evolution (Tractor Truck)

Buy these, I must !

[JennyMo 3526]

Separated at birth?

That is kinda spooky!

I like the idea of a 4WD chassis this size... not sure on those wheels though as others have said... but the new little Landcruiser rocks!

Jx

[Sayer 742]

Oh wow mr T redesigned the WR02 gearbox into a WR04. Those wheels leave some room for improvement.

I've still got TLT wheels that will bolt right on.

[Klausen 1197]

Yehaaaa TRF503. Looking forward to build this.

[mr crispy 2293]

Although I welcome a new 4x4 fun sized chassis I think Tamiya have missed a trick here. It looks a little over engineered and I'm not keen on the steering servo placement, it'll limit other body fitting options. I wonder what steering mechanism they're using and how much slack it'll have?

They could've gotten a similar short 4x4 by simply producing an official shortened TL01 chassis. It would only need 2 new plastic moulds of the chassis halfs and a shorter propshaft. In fact if they made its design similar to the M03/05 series with a front and rear section bolted together, they could've included a spacer section to allow the one chassis to fit multiple wheelbase lengths. Bolt multiple spacers together for longer chassis or a larger spacer that incorporates the battery cross wise like a M or TL chassis. Everything else would be sourced from TL, M or WW2 etc.

The new chassis halfs could also address the lack of gearing options that the TL has or at least offer lower tooth pinion options .

[Percymon 2184]

Separated at birth?

not sure on those wheels though as others have said... but this little Landcruiser rocks!

Jx

I've still got TLT wheels that will bolt right on.

I have some 3.8 desperados looking for a home

[mheald 351]

****! I just bought my son his second WR-02 car only this time with a faster motor, and as I was building it I was thinking 'my boy needs to move up to 4WD for all our quarry trips' lol. And low and behold, this arises. Looks like his 3rd car is now found

Although I foresee two being bought as man, these cars are SOOOO much fun.

[Kenny G 258]

When I read Toyota Land Cruiser 40 Pickup i instantly thought the GF-01 would be a new scale chassis. That being said, that thing looks awesome! Iv'e been waiting for a TLT-1 sized 4wd.

[Mokei Kagaku 2706]

Official Tamiya video of the 56340 Freightliner Cascadia Evolution

[TWINSET 1793]

Cutaway of the Land Cruiser chassis/gearbox (Blagged from IGBANDY on FB)

[Sayer 742]

Cutaway of the Land Cruiser chassis/gearbox (Blagged from IGBANDY on FB)

That looks like only a single pinion option and more of those plastic bushings we all love.

[waterbok 1282]

That looks like only a single pinion option and more of those plastic bushings we all love.

no, two pinion sizes, look at the position of the holes the 20T is set a little lower

[GregM 1109]

Cutaway of the Land Cruiser chassis/gearbox (Blagged from IGBANDY on FB)

[SteveU30 1011]

Love that FJ40 pickup body, I wonder what the wheelbase will be? Would look great on a scale chassis.