Disco 88 Posted September 19, 2014 Hi, I have a kingcab that's used as a runner, its fitted with a 23t Tamiya superstock motor that I have used for some time, I modified the diff using egress diff housings as they are made from alloy not cast material, these have held up for years of use with a fairly tight diff with no problems. Only one of the egress housings need to be modified if I remember, maybe you can get this done at a local engineering company new you? 1 Share this post Link to post Share on other sites
Hudson 53 Posted September 19, 2014 If I keep drinking wine at my current velocity I'll soon be feeling reckless enough to hit that 'buy it now' button, can anyone offer an opinion on 32 pitch or 48 pitch for the Thorp ball diff kit? Share this post Link to post Share on other sites
kontemax 1725 Posted September 19, 2014 The original King Cab module is 32 pitch.48 pitch module is more efficient but weaker, I suggest 32 pitch for two reason:- You shouldn't change all internal gears to 48 pitch.- 32 pitch is bigger and stronger.You can buy both of them but I would use the 48 pitch on the Astute.Max Share this post Link to post Share on other sites
whahooo 465 Posted May 19, 2015 Hello everybody! I´m also a proud King Cab owner and i also have a problem with my differential, it slipps... ...in all my 3 King Cabs!! So i want to get spareparts for a repair. My first purchase is 2x Tamiya Ball Diff Grease, i hope this solves the problem, but i`m sure the diff will make troubles in the future. So i decided to purchase the press parts bag from the Mad Cap (58082) #9405542 & the Mad Cap diff parts (58082) #9405547. Can anyone advice me if that are the right parts for a King Cab? Info: I don`t want to pay a Thorp diff because i don`t think thats necessary, i`m only running the silvercan in it, maybe have a look in my showroom.... I hope my English is somewhat understandable Thanks, whahooo! Share this post Link to post Share on other sites
Truck Norris 2237 Posted May 19, 2015 Yes those are the right parts! I've just this minute finished rebuilding my King Cab's differential using these Madcap parts as they are exactly the same. You will need to re-use your SE1 Ball thrust bearings as the Madcap doesn't have these parts. The 9405547 diff parts bag has two sizes of bearings, small for the Madcap and large for the King Cab. I have given mine a quick run and it's perfect now Share this post Link to post Share on other sites
whahooo 465 Posted May 19, 2015 Thanks mate! Ive just ordered the parts. Now i can rebuild my 3 King Cab differentials. I hope that i`m now able to use my runner again for years. And i think, i have another set of the ball thrust berings in a superglued spare diff that i bought years ago... ...i´ll see if i can resurrect the ball thrust bearings. Share this post Link to post Share on other sites
Flerbizky 225 Posted May 20, 2015 Hmmm.. Wondering how much work it would be, to graft a Blitzer Beetle transmission to the Hilux chassis... *Goes to have a wee look at both* Share this post Link to post Share on other sites
ELEPHT70 43 Posted April 25, 2018 On 20/05/2015 at 7:29 PM, Flerbizky said: Hmmm.. Wondering how much work it would be, to graft a Blitzer Beetle transmission to the Hilux chassis... *Goes to have a wee look at both* Any luck with that Blitzer rear end lol... Share this post Link to post Share on other sites
Ann3x 220 Posted April 25, 2018 4 hours ago, ELEPHT70 said: Any luck with that Blitzer rear end lol... I've fitted a Dyna Storm tranny to mine - not too hard to do, a new sub chassis and a bit of chassis trimming (albeit Kingcab chassis are rare - so you can't afford to mess up here!) and much closer in keeping to the KingCab heritage than a Blitzer. Alternatively check here. There should shortly be a drop in, modern alternative to the Astute/ King Cab / TTC. Share this post Link to post Share on other sites
Flerbizky 225 Posted May 2, 2018 On 25/04/2018 at 9:45 AM, ELEPHT70 said: Any luck with that Blitzer rear end lol... no... lol I still think it could work though...lol Share this post Link to post Share on other sites
ELEPHT70 43 Posted May 12, 2018 I ended up modifying a spare King Cab body and fitted it to my Blitzer Beetle chassis lol. Done custom mounted in the back and 3 holes in the body and done! This thing is brushless and absolutely flies. It bore looks cool whilst doing it 😊 I'll get to my King Cab chassis one day... 1 Share this post Link to post Share on other sites
wildwillydriver 33 Posted May 14, 2018 On 12/5/2018 at 8:37 AM, ELEPHT70 said: I ended up modifying a spare King Cab body and fitted it to my Blitzer Beetle chassis lol. Done custom mounted in the back and 3 holes in the body and done! This thing is brushless and absolutely flies. It bore looks cool whilst doing it 😊 I'll get to my King Cab chassis one day... Love the tyres! WWD 1 Share this post Link to post Share on other sites
ELEPHT70 43 Posted May 15, 2018 Haha yeah man they absolutely rip on grass!! Proline Trac-Ta-Gator 2.2" Share this post Link to post Share on other sites
wildwillydriver 33 Posted May 15, 2018 6 hours ago, ELEPHT70 said: Haha yeah man they absolutely rip on grass!! Proline Trac-Ta-Gator 2.2" YES! But very hard to find.... WWD Share this post Link to post Share on other sites
ELEPHT70 43 Posted May 15, 2018 Here ya go mate https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F182721983882 1 Share this post Link to post Share on other sites