Jump to content

Recommended Posts

image.jpegBump for BMX, my 92 GT interceptor, bit of a mix of parts but I'm happy with it. Also got a unstamped 1980 Aussie MX11 Redline that needs a full resto.

  • Like 1

Share this post


Link to post
Share on other sites

I would love this bike but I do not think my wife will share my enthusiasm 😀I had a black aero burner back in the day and then went onto a GT Pro performer with white skyways.

Share this post


Link to post
Share on other sites

I had no idea that Raleigh actually won a World Championship with the Burner. I always assumed that within the BMX scene back then Raleigh had a similar standing in the field as Tamiya did in RC, ie lots of fun but not really competitive.

  • Like 1

Share this post


Link to post
Share on other sites
23 hours ago, Wandy said:

I had no idea that Raleigh actually won a World Championship with the Burner. I always assumed that within the BMX scene back then Raleigh had a similar standing in the field as Tamiya did in RC, ie lots of fun but not really competitive.

hehehehe remember the old times when some American organiser just starts up a new race & simply calls it "World Championship"?? Even though most of the OUTSIDE world don't get to hear of it until after it's over? 

At least by 1985, WC run for 3rd time, now about dozen foreign countries joining in.. there's like a heap of different classes... so who's the World Champ?

Craig Schofield the only Raleigh rider amongst the mugshots that I spy.

http://www.universityofbmx.com/component/content/article?id=353:history-of-bmx-1985

Share this post


Link to post
Share on other sites

Like most things my bmx was a secound hand silver fox which I sold for £20 to a mate .... I regret that! However I am now the proud owner of a 35th anniversary Raleigh chrome pro burner which like all my Tamiya cars will stay in the box for the time being.

now I'm looking at others, I really can't afford all this 80s retro goodness.

chris

Share this post


Link to post
Share on other sites

Well, I sold off my Skyway and Haro, was enjoying building them, but time and $$$ caused a rethink on continuing down that path. I really needed to “trim” down my hobbies as none were getting the attention they deserved (sounds like kids :lol:)

  • Like 1

Share this post


Link to post
Share on other sites

I was looking at getting a mongoose as some BMX joint makes them on FB .  They were not cheap $1500 + give or take a few $$$$$ 

:lol: . Owell some things you have too let go , So how's it like without kids BAHAHAHA ....  ""Oh"" you sold the bikes ! ..

Share this post


Link to post
Share on other sites
14 hours ago, matman said:

I was looking at getting a mongoose as some BMX joint makes them on FB .  They were not cheap $1500 + give or take a few $$$$$ 

:lol: . Owell some things you have too let go , So how's it like without kids BAHAHAHA ....  ""Oh"" you sold the bikes ! ..

Haha, I’m back focusing on the number 1 kid, RC, for a while at least B)

  • Like 1

Share this post


Link to post
Share on other sites

I genuinely don't know exactly how much old bmx stuff I've got! :D

I'll keep it short & sweet with my 1980 Mongoose.

r3gpkJ4l.jpg

  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites
35 minutes ago, Futura said:

I genuinely don't know exactly how much old bmx stuff I've got! :D

I'll keep it short & sweet with my 1980 Mongoose.

r3gpkJ4l.jpg

she's a beaut

  • Like 2

Share this post


Link to post
Share on other sites

Surprised that nobody has bumped this thread in recent months as I just stumbled on the fact that Raleigh have re-popped the Super Tuff Burner... https://www.raleigh.co.uk/stbur19-super-tuff-burner ...but didn't they bring this one back in 2007 too?

I know that they re-released the Aero Burner a little while ago. Was that a success?

Anyway, the reason I ask is that I am tempted by this Super Tuff re-release. If nothing else, it's a beautiful looking thing. Most of all though, probably the one and only thing that I never had as a kid when it was popular was a BMX. Not that I couldn't have had one, but I just prefered the marauding beastliness of the Raleigh Bomber back then. So this might be an itch that I finally get to scratch. Unfortunately though I missed the "pre-sale" so when they go on general sale on October 23rd it might be really difficult to get one.

To all of our resident BMX experts on here...does the spec of this Super Tuff look good for the price?

 

Share this post


Link to post
Share on other sites

Depends what you mean by "value"... sure it sounds "cheap" compared to paying crazy resale prices for original mint old stock. But if you consider its all repop and IMHO pretty overpriced (vs a modern BMX)... well I wouldn't call it "investment" :P 

Everybody's in the repop game now, go into bike store see all these shiny retro Kuwahara ETs, brand new PK Rippers etc... meh. Looks nice sure. Got no soul methink. 

Although gotta admit im kinda eyeing those super sized ones :) 26" sweet. 

  • Like 1

Share this post


Link to post
Share on other sites
On 10/12/2019 at 9:51 AM, WillyChang said:

Depends what you mean by "value"... sure it sounds "cheap" compared to paying crazy resale prices for original mint old stock. But if you consider its all repop and IMHO pretty overpriced (vs a modern BMX)... well I wouldn't call it "investment" :P 

Everybody's in the repop game now, go into bike store see all these shiny retro Kuwahara ETs, brand new PK Rippers etc... meh. Looks nice sure. Got no soul methink. 

Although gotta admit im kinda eyeing those super sized ones :) 26" sweet. 

To be fair, I am not intested in it for the performance....just the nostalgia. And as long as it is "reasonably" good value for money then that will do.

Those 30th Anniversary Kuwahara E.Ts seem to go for crazy money. :blink:

Share this post


Link to post
Share on other sites

I thought I'd share one of the jewels I built a few years back. Hope you enjoy.

 

p5pb13591203.jpg

p5pb13591212.jpg

  • Like 6

Share this post


Link to post
Share on other sites

Didn't get round to posting this. Was a little Christmas present to myself 6 months ago.... B)

burner.thumb.jpg.6ff5fd4a54094ed7bbcf0ecb09ed757f.jpg

burner3.jpg

  • Like 3
  • Thanks 2

Share this post


Link to post
Share on other sites

Well, there's a reason why I avoid as much as possible to go down to our basement, just look at this. Sadder than a George Jones song!

My beloved 1984 bikes Kuwahara Survivor 2.5 and Mongoose Expert...

https://i.imgur.com/LGWdzB2.jpg

(I have the original Elina seat for the Kuwie, this one worked better for me to ride)

I need new tires for them. Three years ago when I went to get some air for the tires the front one exploded right on to my face. My ear kept ringing for about three days.

Y'all stay safe and have a good Sunday, the BEST day of the week. Or it used to be...

  • Like 4

Share this post


Link to post
Share on other sites
On 6/28/2020 at 4:06 PM, Wandy said:

Didn't get round to posting this. Was a little Christmas present to myself 6 months ago.... B)

burner.thumb.jpg.6ff5fd4a54094ed7bbcf0ecb09ed757f.jpg

burner3.jpg

I had a Night Burner as a kid, loved that bike but man it was heavy.. Black and red colour theme, my dad did an ‘upgrade’ by adding three gears.

Share this post


Link to post
Share on other sites
On 6/29/2020 at 1:06 AM, Wandy said:

 

burner3.jpg

The wheels I should of had 😉

Some more love for the good ‘ol Burner here to.
I still remember my Dad showing me a line of BMX’s at Halfords asking what I liked. I pointed to a red ‘California’ to which he then said “I thought as much” then showed me the tag on it with my name on! 😁. Anyway being made of some dodgy Spanish metal saw the thing undergoing warranty repairs more than being ridden so we paid an extra 30quid to upgraded to a Raleigh Burner. Many a happy day was spent for years on that thing at the local skate park and woods. I got through a few sets of wheels and folks. I also knocked a front tooth out when a new stem snapped that was put on to replace the bent one in the picture!! It must have been a fault with those as friends also snapped a couple of days after fitting, he didn’t loose any teeth though 😂. Happy days.

3F0210F5-81CA-4648-96DC-BBF2F64F2507.jpg

 

  • Like 1

Share this post


Link to post
Share on other sites

Not sure if I should resurrect this thread, but what the heck!

1987 Gt Performer:

image.thumb.png.964df7045753152010eda764326ca7b2.png

 

The 1987 GT Performer with a customized 2019 Street Performer 29":

image.thumb.png.9d2755e6f7b7b8d975454144656f9491.png

 

Customized 2018 G2 C.T.Kustom 29" Bolt:

image.thumb.png.71b08c3dfcab4ea44399858eab78353b.png

 

 

  • Like 2

Share this post


Link to post
Share on other sites
On 7/13/2023 at 3:32 AM, GToddC5 said:

Not sure if I should resurrect this thread, but what the heck!

1987 Gt Performer:

image.thumb.png.964df7045753152010eda764326ca7b2.png

 

The 1987 GT Performer with a customized 2019 Street Performer 29":

image.thumb.png.9d2755e6f7b7b8d975454144656f9491.png

 

Customized 2018 G2 C.T.Kustom 29" Bolt:

AIL4fc9IWcniI4llq5pSTMyP_HG9-I4lCAzfGbpZwKYtlzkblR_ver9JiQ-ysevyMrdqw71hLmt0cRsYrSJMGD25yDaMujH6DocdQxffwjkFfi5CyZH2mLG_YGAUoaXy39iJJU1oZ11Cs0eolKaZ9-cAYP2MvmXh_VZcIs8Mys1pDlpRL-F7hEd2QHib5BYKtSuoPoRKRtRO8JI-09Mw1KK2ngzhxWZFD5lpEHeandga48mfgG8Hto72V_d9ynXD3LmaYcZ8FCNqUIoENEb8GzxL3ogy_fEr0ahoYzCRfgabvyDP9n-5D5H8BK9td82QGKJmzQbzRVqtH3qTJ8R9ZUrKoJzU78plYxcKejRvALnD6cpZ_Fx0xiKXrAu-gnZKh3P3Nm4i5iAlm6oLg-AwtSPumKJQOMw3K6WBu02uTCA_Fzhbk_4oSTFV5zImrKwyzkPFpn1MjcFP5yf3MOrkxYfuSgtxKhOYRSUlIDV4TwjC5DfI5yE-7roUCzePUlqhi-bS7DEXpn83IbHpc5RhNUZWKnRi-cxHjvW6L8P6pkbFNDIvO9H73JghypPkbEgJzEXNoRn6evP9OLc9ydjIvj12UnK9MzjoiiMcHdzO4Md9EqIbKj1rei6pMzSEqq8T55Ap18X2g3afNKOc1ZSRkvR4Inati-En45JCJLcA6p44iFvVWG1pAhATI4UcS1IsfoKnNVBksRvI2BwwxrIS8WItf2_6Jadfc9eFE-sUkSgd0wdb1HkhqqifzDWTUHb20gx5ep2VDtEkm7HZFo2MJMu-_4Bs2RYL7mHjnYITlrj9_sBmQmkdSovNh3TUV8PB5zbe6xBRkYN1YcQ9hEO-L58-dVNt2maLyMpQ0W8bg_8r7IJ9CmOXdrV_CxLsbAByJ6P-JbtEuUyXucVW5JLcmk95PumxRE4=w1270-h953-s-no?authuser=0

 

Customized 2020 GT Reunion 26":

AIL4fc-xE4m8pMhRtx_qhY2giFDWIVpnvIaYKobIAqqhovCqIjkSkTjfqOSoxqfWujA7T9ORAZKrg8fqDKjrea1TxmM9VZPZT5uagWi-AH5CdgoorZTdG8jRUlRl0byxCuBS6kcBMPPrw_uKvTWvkhPg6nYsmQQsBlsV_9Lzjo-wmK4C5BhZ3Qn8hd-9TiNue-I-CY-doC75HzY0wCfpbZagPjegYcDWzq9W70ptmqlQUaBv5i1TKEfKv5HmjWOoDYtNyxcjB8JZj7zq_oS1pcAzvPRjpGtQfNOq7KRBhl4-4ZBBYT9OHzcMx2fE97lGfTFiCO5q9b5VfbQAFnM3mdPGYKkL9qB6CXpTtXYdjNeSPmyZYuMw6J47rrW4WrDqrQi-zLq34tkSFWQ3pUZrkKF1lMOm9Q28FOtScSzLTo-Fzm7mhf4Khz1w0yvPq4sho-YzKxO4dbJlXKbEI_rrCDbSaNPVQCO6xSPE-JUpXcRDkceo_wTNo_XHrqJzj9y8I8eis5JCD164CmmdvGzTpNo5YMLR6CUexjVmT4qDodXxI2mvUXfFZYKILFTV6PUjJdT2bLvKysftdHpIbPAt8_PjYo-0mO0oUl_6y5AfxGyghe_VmFil_oYKcZKuGLryPypmkQY2dfL_gvmbOL4xqAN3l2dYtfljf1VqOJAAhgjeYobgiCGPqrIvKrKcR2ZBh4vY82hNdylmzy4urtEFi_fsR3huNW3yRpcb94zeW9DYHUEy6jBQ4z1UqC9kuq3ZEdiwqORl-oSqGgoah1rCMYSJPvfzUptrDN3XIUiHJjK67Gd7sAUsXiMqy1YlFF0yt5xiZMtcgjZc5YpLYb4TvoWJ2dBHNORQDIqD9w_LBZLfU2vZg5gcghzdKQH3pQIVPOHmAVmEkZXO0QWLCso3kXCfuCcAdGg=w1066-h953-s-no?authuser=0

 

Customized 2018 GT Pro Performer 26":

AIL4fc8VzEty7gC_Cosp2b1qXwuGItE9d1BY6jyLnt0eJdykMnnnYLZaBiHcejhXqR5UfRgSVlkjMCK9gk6FLyk1H1cJESGcfRnB4TMXnY9mtVsPifm1pcZE19LBxHAIzLD5tfcBnVcA75Aw2fLcGy-9M3B1DroxSWG9ZambnOyYMJYKAJimFFD5zQ3Ia_Kjm6b-JVV3wRLLxa70UZ7hrjPMtvgE9ovyrv66gytXunMVyJhVuSc4qahdN6L-GHSflvgK7ujnJ_rWd9QCxn6ul2dtlZgqLemdgrKb7eZ4IqAkquvOAp5rwmy4Zo6L46r3IDSSfPIcnR8g-kXqjtMOcFcTwtd8e7_Rw8W3lB8Jip7gTD7cSsfVi4zT9OYM75FCpXMVuaso5BSmw4hRk42-ILZkHajiFU0oW4VNjmOjAgGPlbn_I9-MB37BrGl9i6x2SRv1XybDPkywqm5cp8RE1k2niSLtIbuOBTIMlnbHhs5_miEMRcv1xp--AKhOyPJldojiddQUPcjmWqlxP308Id1kNJmdCbm5kC2Yn3__t-UBXiSTl_M0uvGOxzVGaPXoVccfsUjafpfnjVhO_dRtwuLEd4Hj0CdmJwS8xt1ChcM7ACP7EILPbeDMat83MWjODNIEDQVW7AZ5PgQs4nk6RstzSI4HNp0fQpK2fdc5q27x0cMsXnzL1gN5zmj0WcgRdRJL1vimwYdykLQ30BpTNyBKABvXbMZ1UOIvcDDJIfXEf1gWtlf_JB7y1yeKK3FvkSr-1tjcyEIMdPzXcbVTeKeH9OdTkqyJ03r7S5jQpKgLEFQvuLvDYVCQc1yQqRRG-VI_UW015e1r-7LZEi2lc3eWvzaYxumPKTP8sF43uFKn_ixVi-OL_oY07HUc93IATTO4GG8ZlZX54CPumeJyaQwPHXapvag=w1195-h953-s-no?authuser=0

 

Customized 2020 S&M Covid Cruiser 29":

AIL4fc_2W_Xcs4v_aPWt6WrTS9sl0mVyYBaKdppCBJfsdcnP7hdwkW2GGXqGYP-I6U-7_125EsbhoUsZwWK61Krs9-cAt-h6cKfPgD1K2QHAIGwXpc3Nccf8Bh3o2e7dxD-1mVBGPFqARtHJJy7aqpDbR8K5r9HCqXGjgfRMtuVqB84JsTRclgKKH_PrM2AbzzRh5uIsLWs7nyjz0eNqon0qToUM1NTxSRE8wt7WEn1_hGKYgPk_3wVwiusad8coOrr9dSrrpVWxQAJJj6q4fAUfaO7mlt_wG_NVObm-SuTDZcE3W4BoGtszLI0sxqut6bGJF_1whNTE672Ebv7htpWHwts-6PGp1Sikb0hsb6I9xks-v_znrkNKuFOqhHPvuGnYf8iAWFgycfl9NXu5gUhEP6MEeIrC9BtjQAd9FM1wKo656_Y9oIKVM0YY9Bxqjty64iwbDDabkBXa2b-aJU2crOEl3zG4galalH7CLJNO291tEgfV0OIS8LQA5-ufAus0B2pNAWzpC9anyYZOTNxiSUJlEgLfrsR8_jTSRU-rG-5a3ab4mwpMFo_VpInpE5PPS2XwbjMP7JfUIL_6Q1l9IG2JOf1JNcYTBY11bDQKmKsCXi_Kk6vu6kX6ylYObwh5IO013_lXQ0NXo_8RwiwoOV2Iu8sp2-AlCL8l8YmvjZjYuGqm2zuemGp8Hkfn1QhMND81y7DWWWjwO-nbNO_unHeVZ2ZwPOkCBZr2FZbd2GYyYlnbgRRN3zpmg2Cvd2lKag7ekgS6e6DRcEAWrQueJzY56Dsfj7hncVW7dRqe67mrhBZWgS9OSJ_CD6garbKnIWHDznfkjtiIg2mjg9GoJsz0pw5rx2vEIBqA4YYE7j7zQ1oRBft77ao0OAg3-YzE_-AxVVE3pe3BlcrR54Uk8vCth_o=w1153-h953-s-no?authuser=0

 

Project mockup before cutting the fork and powder coating the frame, of a 2009 Knight Bike 24" Proformer frameset (will be a 24" tribute build of my 1987 GT Performer):

AIL4fc8nai2mcMnPf_XniQOF5Pagy7an7EyOM_mkDXYmd0Hq4XhCBnQcXuvr31eZGLOeJQHJ0chWgFq11iXm_Qvy7uxorg7QWrBs4Z_hMIMd5bdmHht8Z-iX1IOs4-u_P43drGV7KNo8rDq_pEkeH80izj1nR1aCicqDpZluKE0qhysTk0dc4BaZdPxC4mAXEhyDAi3AJgAmOJy0cEovhIKYt3WXzQyQykDrQg6NFTOEUv5Lk5iiWzKqcG81ZEi3XMk2vaCGrUF_Prm8lT_K0lJAfqwo7LKCTk4FE59HS4yDTgXqeYl3wBoFNU6Fgd3QY9uwWgXyYfPeB_Kto4zy88UXCXWJ-ofFgdE0qNYlZfEvp4EJup3yNjb2sBoNLMRTn433TboOs33AaGrct3gWCwnsTHbKT9oEn6bzlreIagbX1TLjSPuDWUzreaF0s6-5XQjh9sn-pcEoVWHfltCMVcFf3WUsidKDlyr3YSW5jelWA1JrGsMoUjWBA49bwZLvzKQDRSP29FV7ZNj4xntHmQDBoGsHkDLWsUF2_A17rKbSIfdXFFAjMG4iEqvkAVXYzp22QmhMLWiSO1-7LmwKElQxyWAPjud38DA-XY_8mfD4CFIKBpp8ZqWanr91dvyjGEXdr9yeEcvUHqcLOuo3Hv64b_tfL_zMlC8aFdn7sfLMQ7OMPsS-m_XVxJBqmX2AijkAME_OA3tSMvJd9JOxacHcO0xjX5IUrfJBuqZcPhB5HLcwXnpKA6gYxrlPEAvOYnoYq72WEHxb9tSpYZWCE3_NXli-drxkYWa6UoAq0zuOkmFBMKNKgoX18B_uP9PfJfNjLB3pDfAPVmoFxeQMRCKHncdyUL2Vwr4o5fJ7ewaFsIpUq0tSmwqZWykznf8ueC_DDGteonSAmhNFPKelTVwvsWhMFMY=w1309-h953-s-no?authuser=0

Not all pics are showing for me, but the first 2 get a 👍

Share this post


Link to post
Share on other sites

Continued because of file size limit:

Customized 2020 GT Reunion 26":

image.thumb.png.0dd2d91bae87ca76f36bc1e0ac12fdef.png

 

Customized 2018 GT Pro Performer 26":

image.thumb.png.737c81e5879ba0ca090fc735a7b4a1fe.png

 

  • Like 1

Share this post


Link to post
Share on other sites

Continued because of file size limit:

Customized 2020 S&M Covid Cruiser 29":

image.thumb.png.7f04e0c7c3f9014414fce65c18909cd9.png

 

Project mockup before cutting the fork and powder coating the frame, of a 2009 Knight Bike 24" Proformer frameset (will be a 24" tribute build of my 1987 GT Performer):

image.thumb.png.2165b24077dcdfa2b7b9dff1c6f7f1ad.png

  • Like 1

Share this post


Link to post
Share on other sites
3 hours ago, mtbkym01 said:

Not all pics are showing for me, but the first 2 get a 👍

I think there were some file size limitations or something, so I edited and added some replies.

Thanks!

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...