Jump to content
Zac_F83

My $100 Losi XX and XXX Kinwalds

Recommended Posts

Well my friend and I decided to check out a semi local track, he invited 2 of his friends one of which brought these with.. after we raced them he offered them to me for $100..

Both in great shape, the XX was rtr with a Dynamite brushless setup in it, and the XXX had a Novak Cyclone ESC, and Reedy 19t spec motor..

Came with a tool box full of NiMH batteries, 5 motors, and a coupe spare parts. I set out right after buying them (2 weeks ago now) to clean them up.. had them ready to go yesterday at the track, and what fun they were.. so much fun ..

Bought-
Fast Eddie bearing kits
1 Hitec HS-311 servo
Novak Racer ESC for XXX
2 sets of tires (M4 Pro-line Square Fuzzies, M4 4 ribs)
NOS threaded shock collars for the XXX
4-40x1" button head screws for front axles
19t and 23t RRP pinions
1 lot of 3 sets of clean original wheels
Lunsfords titanium turnbuckle kit + RPM rods ends for XXX
Losi/ Spectrum 2.4 radio's (2)


XX specs-
Fast Eddie bearings
Lunsford titanium turnbuckles w/ stock rod ends
Trinity aluminum front,rear hinge pin, and transmission braces
Trinity motor plate
Slipper clutch swap
Hitec HS-311 servo
Novak Cyclone ESC
Trinity P2K spec 27t motor - swapped out bushings for bearings
Losi/Spectrum 2.4 radio
Pro-line M4 Square Fuzzie / M4 4 Ribs tires
RPM gear cover

XXX specs-
Fast Eddie bearings
Lunsford titanium turnbuckles w/ RPM rod ends
Trinity aluminum front and rear hinge pin braces
Trinity motor plate
Hitec HS-311 servo
Novak Racer ESC
Trinity Komodo 19t spec motor
Losi/Spectrum 2.4 radio
Pro-line M4 Square Fuzzie / M4 4 Ribs tires
RPM gear cover

Losi%201_zpso4ay1pfc.jpg

losi%202_zpsrbhuavfv.jpg

losi%203_zps7zvd5pq9.jpg

losi%204_zpsdr0sttvz.jpg

losi%205_zpsyikbqudb.jpg

losi%206_zpst0mjko6l.jpg

losi%207_zpsk3gdklbh.jpg

losi%208_zpsk95malcx.jpg

losi%209_zpszfy3zgsv.jpg

losi%2010_zpswvxcadd4.jpg

losi%2011_zpsiwicf5b6.jpg

losi%2012_zpsntcm73fd.jpg

Share this post


Link to post
Share on other sites

Nice! I've never really been much of a Losi fan, but I know a bargain when I see one. Good score!

  • Like 1

Share this post


Link to post
Share on other sites

I never really was into buggies, let alone Losi.. but $100 couldn't be turned down! After cleaning them up, investing a little into them, they really run awesome!

I have purchased CVD's for the XXX so the XX can get it's CVD's back, and gain about 1/4" in track width in the rear..

Share this post


Link to post
Share on other sites

Well a decent hiatus due to my 1:1 71 Demon but I'm back! Working on my XXX a little! Haven't touched the XX CR - have RPM rod ends waiting for it but not sure I'll put them on or not..

Bought a EA3 XXX CR for some nice Trinity blue anodized parts! Just got done fitting them last Thursday!

About a month after posting this thread I was lucky enough to find a NOS Trinity 15t arm NIP so I swapped out the NOS 27t arm for the 15t.. took it for a test drive after breaking in the arm/brushes on 5v or so and WOW it flies! Now my favorite buggy out of my collection.

Here is what I managed to get off the XXX EA3 CR - it had a blue aluminum rear arm mount, but I found out the hard way it will not fit a BK2 buggy so it will stay with the EA3 -

14 or so anodized blue finishing washers
Anodized blue shock collars
Nos fiberglass blue plaid front shock tower (have another NIP that is blue glitter)
Anodized blue front hinge pin brace
Anodized blue front bulk head
Anodized blue front axle hex's
Well worn anodized blue wheel nuts
Added some stainless hardware as well
Correct cvd's (had aluminum XXX4's in it)
Also found out it has a full set of TiNi coated hinge pins!

AND just bought today - NOS Trinity blue rear wheel spacers and rear hinge pin mount!

losi%2013_zpsli2s8e0d.jpg

Losi%20XXX%208_zpscslj7x0b.jpg

Losi%20XXX%201_zpsjqjcvtc1.jpg

Losi%20XXX%202_zps0sngzdin.jpg

Losi%20XXX%203_zpsmsiuwhib.jpg

Losi%20XXX%204_zpskeu3hn1g.jpg

Losi%20XXX%205_zpsftkeyf26.jpg

Losi%20XXX%206_zpsv7v9mihn.jpg

Losi%20XXX%207_zpslscnex6q.jpg

NOS%20Kinwald%20can_zps7hc3bdze.jpg

Losi%20XXX%20motor_zpszqyqvq6d.jpg

Share this post


Link to post
Share on other sites

Well guys! Another update for the Losi's!

Found a BUNCH of parts for the XXX and pretty much restored it at this point lol - also went thru the XX a little more..

XX-
NOS Trinity blue front hinge pin brace/ trans brace
NOS correct "Punisher" decals for front pin brace
Swapped 84t purple spur gear for white 78t (24t/78t gearing)
VERY nice used original wheels/tires
Losi rear's w/ Losi mini pins
Pro-Line 4 ribs w/ Pro-Line wheels
Lowered ride height

XXX -
New/used clean chassis
NOS rear chassis pivot plate
New/used ok shape front chassis plate
NOS Trinity blue aluminum rear pivot brace
NOS Trinity blue weave graphite/Aluminum motor plate
NOS Losi sway bar kit w/ XXX-SCT blue aluminum hinge pin brace
VERY nice used original Pro-Line wheels/ Holeshot Pro-184/ 4 Ribs tires
Bunch of new/used hardware
New/used BK2 trans case - shimmed up with AE aluminum #4 washers to clear hinge pins
Swapped white 78t spur for purple 84t spur (24t/84t gearing)
Added 10° of timing to the Kinwald 15t motor
Lowered ride height
Haven't gotten yet - NOS Trinity blue aluminum axle spacers - these will need trimmed to fit CVD's but oh well they will look killer!

Scored NOS Trinity blue aluminum rear hub carriers!

Printed off instruction/spec sheets for the Novak Cyclone, and Racer EX ESC's (still available on their site)

MCI Racing makes reproduction decals for the Kinwald car's and plan o buy both sets, as well as, Team Blue Groove bodies for them. Going to have them repainted and decaled just as they are..

MOAR PICS!!! Plus moved all the older pics to a new folder so they will be reposted below in order!!!

Losi%201_zpsiwq8opiu.jpg

losi%202_zpsnvkslrl1.jpg

losi%203_zpsukubytqg.jpg

losi%204_zpsmrwcjjyr.jpg

losi%205_zpsx7nnzz8o.jpg

losi%206_zpsfdamezhm.jpg

losi%207_zpshvduseju.jpg

losi%208_zpsvv1ymnry.jpg

losi%209_zpshexjm5bh.jpg

losi%2010_zps7ovpcaoo.jpg

losi%2011_zpsxx7lk64o.jpg

losi%2012_zpseiney1tc.jpg

losi%2013_zpslazhvcs0.jpg

Share this post


Link to post
Share on other sites

Sadly I lost the header card for the armature, but still have the card for the can setup..

NOS%20Kinwald%20can_zpsox2k5avp.jpg

Losi%20XXX%20motor_zpspfl2jn7o.jpg

Share this post


Link to post
Share on other sites

Another HUGE update!

Well I bought an unadvertised Losi XXX CR BK2 last week, it came today.. OMG it's nice! I ended up robbing all the stainless hardware, and Trinity aluminum parts for my other XXX. Made the new buggy a stock roller with a P2K 27t spec motor, and old Losi wheels/tires.. Here is what I robbed/swapped off the new one to my clean one..

Cleaner front wheels hubs (blue aluminum)
3 blue 4-40 mini nuts (in steering knuckles and servo arm)
Conical washers on the steering rack hold down
Replaced all steel hardware with stainless
Correct cvd's for the Trinity wheel hubs
Blue aluminum wing mounts
Nos Trinity blue aluminum wheel nuts
Swapped left front arms so the clean one has correct arms

Still need..
Trinity rear bearing carrier's coming from a friend
(7) Trinity 4-40 mini nuts
(6) Trinity 4-40 large nuts
New TBG body/wing done in the same style by Trung Au
Blue rear wheels
Nos Losi tires

Losi%20XXX%2025_zpslflr1ajk.jpg

Losi%20XXX%2026_zpsbdt50knh.jpg

Losi%20XXX%2027_zpstapk4qsl.jpg

Losi%20XXX%2028_zps9ijyfbii.jpg

Losi%20XXX%2029_zpssyw4dtpt.jpg

Losi%20XXX%2030_zpscqlqtvbx.jpg

Losi%20XXX%2031_zpspyknitto.jpg

Share this post


Link to post
Share on other sites

The XXX EA3 I got -

P2K 27t motor (out of the XX, which now has the Komodo 19t spec in it)
Trinity shock collars
Futaba S3003 servo
Novak Racer ESC (just bought)
Still need to find a Losi Spektrum 2.4 radio like the other 2 - missing - battery strap, gear cover, and rear body mounts (found everything but the radio so far)

It came with 5 bodies, 3 wings, 4 NIP front Blue wheels, NIP white wheel set, 2 very nice used sets of white wheels with Pro-Line/ Losi tires..

The best body/wing out of the bunch - put white Losi wheels with old Losi tires on it

Losi%20XXX%20EA3%201_zpsxhe74hcn.jpg

Losi%20XXX%20EA3%202_zps3joehzrl.jpg

Losi%20XXX%20EA3%203_zpssmucvu0e.jpg

Losi%20XXX%20EA3%204_zpsge87wqag.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...