What's your CR set-up?

[jeekelemental 528]

Concerning battery/motor/pinion what's the set-up for your CR?

[mr. Rallying 8]

Concerning battery/motor/pinion what's the set-up for your CR?

Speaking of that... I'm planning to use a 3s Li-Po in my Unimog. Anyone know where I can get longer mount screws (BA22) to rise the battery "cover" to get room for the larger battery pack??

Other than that I'll be using a 21,5T sensored QuicRun motor with standard 20T pinion + 60A QuicRun ESC.

[jeekelemental 528]

I guess there aren't too much CR owners...

[jupitertwo 1481]

I've got a CR Tuned with the stock 20T pinion, and run 2S 45C lipos. I've not had too many adventures, but it seems to have plenty torque and appropriate speed.

I also fitted the 4 wheel steer option, as the turning circle seemed shocking.

[waterbok 1280]

Accu: >4000 NiMh 7.2v

Servo: Hitec 645mg F&R with alloy servo arms (filled with grease to make WP)

ESC: Novak rooster, with dragbrake (waterproof)

Motor: rebuildable brushed novak 45T

Pinion: steel RRP 18 or 20T

Wheels: Proline rims + 2.2 Flat irons, weight front: 360gr rear: 300gr each (added lead)

Remote: Spektrum DX3E with MR3000 waterproof receiver

3s and brushless dont make sence imo, brushed workes better on low speed and is way more waterproof/cost effecient.