Ian_Gsi16V 533 Posted August 12, 2016 Spotted this for sale last week and had the impulse to buy it Arrived today The plan for this is to make it 100% runner, when it is not running it will live in the garage so build is purely designed around reliability. I have given it a quick once over and made a list of bits that it needs, my idea is that this will be used over the winter when we have mud / rain etc where my quick Blitzer will be no good so I kind of want to try and stagger the build if possible but I really want to get it running ASAP Plans are as follows: Add missing bits Replace any broken bits and add new gears Uprate a couple of bits like the servo saver and gearbox support plates from the chap on here. It has an uprated 27T motor in it for now so no plans for drive train upgrades until I have used it, may well go for a mild brushless setup simply for the reliability. I was originally thinking about painting the body again but that is certainly on the back burner for now, I don't want it to end up like my other MB that I am scared to use If anyone has any MB / Blackfoot spares then please check the Trade section for my wanted add 1 Share this post Link to post Share on other sites
chevelle 997 Posted August 12, 2016 Oh please don't repaint the body, Maybe just replace the decals for a new look Share this post Link to post Share on other sites
kontemax 1723 Posted August 13, 2016 And replace that nosecone with the original one. Max Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 13, 2016 Did you guys miss the bit where I said this will be a through and through runner Already have this on the shelf 1 Share this post Link to post Share on other sites
chevelle 997 Posted August 13, 2016 LOL, Just saying Hey where are the rear lights off your shelfer? Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 13, 2016 11 minutes ago, chevelle said: LOL, Just saying Hey where are the rear lights off your shelfer? Still in my spares box....I screwed up painting them when I painted it a few years ago and haven't got around to fixing them yet Share this post Link to post Share on other sites
Frog Jumper 3605 Posted August 13, 2016 I say leave the body as is. That way who cares if it scratches or cracks, and I think it looks cool. Terry 2 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 13, 2016 2 hours ago, Frog Jumper said: I say leave the body as is. That way who cares if it scratches or cracks, and I think it looks cool. Terry This is my thinking I have no doubt I will do something with it at some point but hopefully not straight away...... Share this post Link to post Share on other sites
Pablo68 1049 Posted August 16, 2016 I'd leave the body as is too. 2 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 17, 2016 Part buying has begun On holiday next week but hoping to come home to a nice little selection of bits and bobs Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 17, 2016 Started on my plan for the body, beginning by taking off all the random stickers, actually quite like the sticker bomb style on it so they are staying on, paint job is actually pretty decent, still needs a clean 2 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 20, 2016 New rubber sealed bearing arrived along with the gearbox strengthening plates from @mheald Parts trees with probably be ordered in the next week or two and very much considering trying out my first digital and wheeled controller on this! Share this post Link to post Share on other sites
Theibault 1535 Posted August 20, 2016 That body has so much character! Leave it be and run the snot out of it. 2 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 20, 2016 1 hour ago, Theibault said: That body has so much character! Leave it be and run the snot out of it. That's the plan 2 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted August 31, 2016 (edited) Well, nice collection of new bits and bobs are now on their way to me, should have it all by early next week Edit - Just picked up some more pieces, definitely time to stop now Pretty sure I have everything needed for Beetle Runner Build Phase 1 Edited August 31, 2016 by Ian_Gsi16V Bought more stuff! Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted September 2, 2016 Here we go, majority of the bits arrived today 2 Share this post Link to post Share on other sites
Pumesta 407 Posted September 3, 2016 On 31/08/2016 at 8:04 PM, Ian_Gsi16V said: Edit - Just picked up some more pieces, definitely time to stop now Pretty sure I have everything needed for Beetle Runner Build Phase 1 I love the ORV chassis but it can become a bit of a money pit by the time you get them half reliable and fix all the wore out bit 1 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted September 3, 2016 On 9/3/2016 at 9:24 PM, Pumesta said: I love the ORV chassis but it can become a bit of a money pit by the time you get them half reliable and fix all the wore out bit Yep, certainly! I probably could of gone and bought a brand new re-re but for me, the fun is stripping, cleaning, fixing and then running. Buying brand new, chucking it together in a couple of hours doesn't really appeal to me tbh. Body has had a minor facelift, I would of liked some vintage decals but tbh, I got these mainly as they put me over the free postage price bracket on an order, I think they look good 1 Share this post Link to post Share on other sites
Pumesta 407 Posted September 3, 2016 13 minutes ago, Ian_Gsi16V said: Yep, certainly! I probably could of gone and bought a brand new re-re but for me, the fun is stripping, cleaning, fixing and then running. Buying brand new, chucking it together in a couple of hours doesn't really appeal to me tbh. Same here, although my MB frustrated the life out of me. I still have a few bit to do to it, but had to put it to one side and work on my BF Xtreme just to keep me sane. My MB was in a lot worse shape than yours when I got TBH. Share this post Link to post Share on other sites
chevelle 997 Posted September 3, 2016 1 hour ago, Ian_Gsi16V said: 2 Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted September 3, 2016 Just now, chevelle said: Thanks! It actually looks much better in person, pictures haven't come out very well. Chassis cleaning and build tomorrow hopefully : D Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted September 4, 2016 Chassis cleaning and started the build today. As it was... One stripped Beetle.. And going back together.. As is quite obvious, I ditched the red chassis, not really a fan of the red unless the body is red, figured the grey would work better and I think I was right. 2 Share this post Link to post Share on other sites
kontemax 1723 Posted September 5, 2016 I agree with you. I would replace the nosecone. Max Share this post Link to post Share on other sites
Ian_Gsi16V 533 Posted September 5, 2016 6 hours ago, kontemax said: I agree with you. I would replace the nosecone. Max How do I match the silver on a body that I didn't paint and bought secondhand.... .. If I ever decide to repaint the body then yes, a MB nosecone would be fitted as I have the spot lights and decals but until then I think I am bit stuck tbh. Share this post Link to post Share on other sites