Servo advice for lunch box

[Terz1 751]

Hi all. I'm getting a lunch box for christmas and wondering what lost cost servos are out there that perform well, in the UK preferably. Obviously the more features the better such as waterproof, metal gears, hi torque etc. I had a look around and although they sound great it's good to know what people that use them think about them. So has anyone any recommendations for a low cost servo which performs well? The kit only cost £70 so I don't want to spend a lot. Thanks

[berman 5317]

Don't know what they cost in the UK  but my default servos for reasonable speed and good torque are the 0352 (plastic) and 0254 (metal) from Savox. 

There is also a waterproof version 0230 but it is getting up there in price.

There might also be some cheap servos at the hobbyking uk warehouse...

 

[tagnut69 4]

Alturn do a pkg metal geared one for about £15 from model sport

[chazekxt 7]

tactic tsx55 181 oz at 4.8 volts and 203 oz at 6v

[Terz1 751]

Great thanks guys. I'll check those out  . I've got my go to esc but servo wise I've been using old plastic geared futaba ones I've had lying around which are really getting on now. I bought one more recently (about a year ago). It's doing the job quite well but but only experiencing one type isn't the best way to go. I could be missing on so much that's out there. 

Anymore suggestions pop them on here. 

[khyzersoze 269]

I'm using a Savox 254MG.  I think Savox 254MG or 252MG should be fine.

[Wooders28 4958]

I've managed to break 2x futaba 3010 servos (turned out, the pivot point on a 2nd hand car I'd bought, was too much and full steering was way before full servo movement.) 

I've gone for brushless servos ( futaba BLS551 and a BLS351 ), 2nd hand I might add, but they are so much faster that it's taking a while to get used to steering again! 

[Illogical 141]

I have a really cheap 3kg Carson in a VLB and it's fine - I'd say go for speed over torque so you can get some good wheelie wiggling going!

[danb1974 142]

Whatever you choose (this being a fun car, does not require a fast or powerfull servo) get one with a metal output shaft. Mine destroyed pretty quickly the thread from a plastic shaft servo.

[Illogical 141]

That looks like it would be perfect and a bargain to boot.

[Terz1 751]

All look like great suggestions and up to the job. Need another receiver for my code core transmitter which is at modelsport too so the one suggested by bails might make it a double order from them.  It is a bargain too.

[Nobbi1977 1793]

25 minutes ago, Terz1 said:

All look like great suggestions and up to the job. Need another receiver for my code core transmitter which is at modelsport too so the one suggested by bails might make it a double order from them.  It is a bargain too.

The Core RC transmitters can use a cheap hobbyking receiver, cannot remember which one off the top of my head.

[Wooders28 4958]

1 hour ago, Nobbi1977 said:

The Core RC transmitters can use a cheap hobbyking receiver, cannot remember which one off the top of my head.

Guess that's the same for the Tamco?

Kind of looks like my receiver!

https://hobbyking.com/en_us/hk-3000-3ch-2-4ghz-fhss-rx-suit-the-hk310-transmitter.html

[GregM 1109]

+1 on the Savöx SC-0254MG. Although with the Lunchboxes' front wheels spending so much time in the air than on the ground...